Zte O2 MF60 User manual

O2 Pocket Hotspot
Your guide to
getting started
o2.co.uk
Telefónica UK Limited, 260 Bath Road, Slough, Berks, SL1 4DX.
Registered in England and Wales No.1743099. That’s also the address for our registered office.
All the information’s correct at the time of going to print, May 2012. ZTMF60QN 05/12.

What’s O2 Pocket Hotspot?
O2 Pocket Hotspot’s a wireless hotspot you carry around with
you. You can use it to get up to five gadgets online at the same
time – without any wires. You just need to top up the data
at mbb.o2.co.uk before it runs out.
If you’re not happy with it
We’ve given you a 30-day Happiness Guarantee. So if you’re
unhappy with our O2 Pocket Hotspot, we’ll refund you the cost.
Just return it within 30 days from when you bought it.
How’s your signal?
If you’re getting a weak signal, it could mean you’re in an area
with poor coverage. You can check your Mobile Wifi coverage at
o2.co.uk/coveragechecker
Contents
What’s in the box ...........................................................................1
Getting started ...............................................................................2
Charging the battery ......................................................................4
Your O2 Pocket Hotspot features ...................................................5
Connecting to an iPad, iPod Touch or iPhone ..............................6
Connecting on Android .................................................................7
Using WPS to connect your O2 Pocket Hotspot ............................ 8
Connecting to a PC .........................................................................9
Getting connected........................................................................ 11
Checking how much data you’ve used ........................................ 12
How far will your data go? .......................................................... 15
Pay & Go top ups .......................................................................... 17
USB mode ..................................................................................... 22
FAQs & help .................................................................................. 32

1 2
What’s in the box?
O2 Pocket Hotspot
Battery
Charger
USB cable
Quick start guide
Forget me not card
Getting started
Putting in your sim and battery.
1. Use the thumb catch at the bottom of the Pocket Hotspot
to open the battery cover.
2. Put the sim into the sim holder.

3 4
3. Push the battery in (like the picture). Make sure the battery
connectors line up, and press the battery down into the
case.
4. Line the battery cover up and press gently to close the case.
Charging the battery
You can charge your Pocket Hotspot from the mains or
use the USB port on your computer - just connect it using
the USB cable.
A full battery lasts about four hours.
Note: If it’s been a while since you last used your Pocket
Hotspot, you’ll need to charge it up again.

5 6
Your O2 Pocket Hotspot features
1. Antenna connection (antenna not supplied).
2. LED screen.
3. Power – hold the power button to switch the Pocket Hotspot
on or off. You’ll know it’s on when the screen lights up.
4. Memory card slot for a microSD card.
5. WPS button (wifi protected setup – for easy connection).
6. Charger and USB port.
Note: If you hold down the WPS and power buttons at the same
time, you’ll change your Pocket Hotspot back to its original
factory settings. That will mean losing any saved connections.
2
1
3
4
6
5
Connecting to an iPad, iPod Touch
or iPhone
1. Choose Settings, then Wi-Fi. Make sure your wifi is turned
on. Then you’ll see a list of networks.
2. Choose your Pocket Hotspot’s name – you’ll find it under
your battery and on your Forget me not card, along with
your password. You can also double click the WPS button
and your Pocket Hotspot’s name and password will appear
on
the LED screen.
3. Type in your password and click Join.

7 8
Connecting on Android
To connect using wifi on your Android tablet or phone.
1. Check that wifi is turned on, on your tablet or phone.
2. Search for Wireless Networks.
3. Select your Pocket Hotspot’s name from the list – you’ll
find it under your battery and on your Forget me not card,
along with your password. You can also double click the
WPS button and your Pocket Hotspot’s name and password
will appear on the LED screen.
4. Type in your password and click Connect.
Using WPS to connect your
O2 Pocket Hotspot
Certain makes of mobile phone, tablet and computer are
enabled with Wireless Protected Setup (WPS) if you are not sure
if your device supports WPS refer to your manual.
When you press the WPS button on your Pocket Hotspot
and on the gadget you’re trying to get online, they securely
connect to each other. So you don’t need to type in usernames
or passwords.
To connect:
1. Turn on your Pocket Hotspot.
2. Press and hold the WPS button on the Pocket Hotspot for
three seconds – you’ll see ‘WPS Active Waiting’.
3. Turn on WPS on the gadget you want to connect with
(‘WPS Active Waiting’ will disappear).
To turn off WPS, just press the button on your Pocket
Hotspot again.

910
Connecting to a PC
Windows 7
1. Click on the icon in your menu bar.
2. Choose your Pocket Hotspot’s name – you’ll find it under
your battery and on your Forget me not card, along with
your password. You can also double click the WPS button
and your Pocket Hotspot’s name and password will appear
on the LED screen. Click Connect.
3. Type in your password and click OK.
Windows Vista
To connect to a wireless network in Windows Vista, follow
these steps:
1. Click Start.
2. Click Connect to.
3. Choose your Pocket Hotspot’s name – you’ll find it under
your battery and on your Forget me not card, along with
your password. You can also double click the WPS button
and your Pocket Hotspot’s name and password will appear
on the LED screen. Click Connect.
Windows XP
1. Right-click the wireless network connection icon in the
notification area at the bottom right hand corner of
your screen.
2. Click View Available Wireless Networks.
3. In Choose a Wireless Network list, choose your Pocket
Hotspot’s name - you’ll find it under your battery and on
the Forget me not card, along with your password. You can
also double click the WPS button and your Pocket Hotspot’s
name and password will appear on the LED screen.
Click Connect.
4. Type your password in the box labelled Network Key and
then again underneath in the Confirm Network Key box.
5. Click Connect.

11 12
Checking how much data
you’ve used
You can check how much data you’ve used through the Mobile
Wifi welcome page – just click Check your balance now. Or you
can do it on the Mobile Broadband Top Up site at mbb.o2.co.uk.
Don’t worry, going to either page won’t cost you a penny.
Here’s how:
1. From the Mobile Wifi page choose Check your balance
now. Or, go to mbb.o2.co.uk (you might want to bookmark
it for when you need it again).
Getting connected
Once you are connected you will see this page when you open
your internet browser.
From here, you’ll be able to check your data, top up, and
continue to the internet.
It’s a good idea to bookmark this page so you can top up easily if
you run out of credit.

13 14
2. Type in your mobile broadband number if it’s not already
there. You’ll find it on the card you popped your sim out of
(and on your dispatch note, if you bought it online).
You might want to make a note of your mobile broadband
number on the Forget me not card that came in your
Pocket Hotspot box. That way, you’ll always have it handy
whenever you need it.
3. Click Let’s Go.
4. You’ll see your data balance and when it runs out.

15 16
1GB Single activity Mix
Browsing 67 hours 11 hours
Emails sent/received 100,000 16,000
(10KB per email) emails emails
Emails sent/received with
a photo attached 2,000 300
(500KB per email) emails emails
Music downloads 100 songs 17 songs
Watching YouTube 67 clips 11 clips
Movie/TV downloads
(not in HD) 4 hours 40 mins
2GB Single activity Mix
Browsing 133 hours 22 hours
Emails sent/received 200,000 33,000
(10KB per email) emails emails
Emails sent/received with
a photo attached 4,000 660
(500KB/email) emails emails
Music downloads 200 songs 33 songs
Watching YouTube 133 clips 22 clips
Movie/TV downloads
(not in HD) 8 hours 80 mins
How far will your data go?
Here’s a rough guide of what each data allowance will get you.
Single activity means doing just one thing. Mixed activity gives
you an idea of how much you could do if you combined all
these activities.
If you’re watching video clips (on YouTube for example) and
movie/TV downloads, then you could use your data up quicker
than what we’ve listed opposite. It all depends on the length of
the clip/download as well as the quality of the picture.
And if you’re sharing your O2 Pocket Hotspot across gadgets or
with friends, you’ll use your data up quicker too.

17 18
1. From the Mobile Wifi page choose Top up Mobile Wifi and
follow the steps.
2. Or go to mbb.o2.co.uk – you might want to bookmark it for
when you need it again.
3. Type in your mobile broadband number if it’s not already
there. You’ll find it on the card you popped your sim out of
(and on your dispatch note, if you bought it online).
You might want to make a note of your mobile broadband
number on the Forget me not card that came in your O2
Pocket Hotspot box. That way, you’ll always have it handy
whenever you need it.
4. Click Let’s Go.
Pay & Go top ups
Buying data
If you bought a Starter Kit, you’ll already have data. So you can
start browsing straight away. Otherwise, you’ll need to buy data
before you can go online.
You get different amounts of data and time with each package.
It comes in daily or monthly allowances. When you use up your
data, or your time runs out (whichever happens first), you’ll need
to buy more. You can run out of data before you run out of time.
You can buy data with a UK registered Visa, MasterCard,
Switch/Maestro or O2 Money Card.

19 20
7. Choose from our daily or monthly options, then
click Buy now.
5. Register your details and click Send PIN or click Skip.
6. Click Buy data for yourself.

21 22
USB mode:
You can get online with a USB cable instead of using wifi. When
you plug it in to a USB port on your PC or Mac, you’ll have to
follow some instructions on screen.
Your PC will need:
• Windows XP (Service Pack 3), Windows Vista (Service Pack
2) or Windows 7
• USB 2.0 socket
• 50MB of disk space
• 32-bit and 64-bit support
• WPA+WPA2 Security.
Your Mac will need:
• Mac OS X 10.6 – Snow Leopard or Mac OS X 10.7 – Lion
• USB 2.0 socket
• 50MB of disk space
• Intel Processor
• WPA+WPA2 Security.
If you’re using a work computer and don’t have admin rights,
you will need to speak to your IT department for help
installing it.
8. Type in your card details.
9 . C l i c k Submit transaction. If your bank uses extra security
you’ll need to type in your password. Just follow the
on-screen instructions.
10. Click Continue.
11. And you’re done. You’ll need to disconnect before using the
internet. Just turn your Pocket Hotspot off and on again.

23 24
3. The software will get ready to install. It could take a
few minutes.
4. You will get a pop-up asking you to allow the program to
make changes to the computer. Click OK.
5. Click Next to start installing.
Connecting to a PC
Once you’ve connected your O2 Pocket Hotspot to your
computer with the USB cable:
1. Turn on your Pocket Hotspot.
2. Wait a few moments. If the AutoPlay window pops up on
your computer, click Run AutoRun.exe.
If it’s taking more than a few minutes, you can do it
manually by going to Start > (My) Computer. Right click
on O2 Mobile Wifi and choose (Open) Autoplay.

25 26
7. Once it’s done, click Finish.
8. The Mobile Wifi start page will appear. From here,
you’ll be able to check your data, top up and continue to
the internet.
Once you’re done installing, you’ll have a shortcut on
your desktop, and in Start > Programmes. It’ll be called
O2 Mobile Wifi.
6. Choose where you would like to save the software (the
default location is with your Program Files).
Click Next.

27 28
4. Click Continue.
5. The software will get ready to install. It could take a
few minutes.
Connecting to a Mac
Once you’ve connected your O2 Pocket Hotspot to your
computer with the USB cable:
1. Turn on your Pocket Hotspot.
2. The O2 Mobile Wifi icon will appear on your desktop,
double-click it.
3. Double-click on O2 Mobile Wifi.mpkg to start.

29 30
7. Click Install.6. Click Continue.

31 32
FAQs & help
What the symbols on your display mean
Strength of your connection.
What network you’re connected to – either 2G or 3G.
Your Pocket Hotspot will connect to the internet automatically.
You’ll need to manually connect to the internet.
You’re using a roaming network – for when you’re
connecting abroad.
You have a new message.
Whether your wifi is on or off, and how many gadgets
you have connected (in this case 1).
How much battery you have left.
Putting in a microSD Card
1. Pull the microSD cover out of the card slot gently.
2. Put the microSD card into the slot. You’ll hear a click when it
locks in place.
3. Close the microSD cover.
You can use a microSD card with your Pocket Hotspot to share
files between connected gadgets over wifi, or for USB storage.
8. If your Mac asks you for your admin name and password,
type it in (this is usually the username and password you
used when setting up your Mac for the first time).
Click Install Software.
9. The software will start to install. You’ll get a message when
it’s done. You may get a popup telling you a new network
interface has been detected, if so click Cancel.
10. Click Close to finish.
11. The Mobile Wifi start page will appear. From here, you’ll be
able to check your data, top up and continue to the internet.

33 34
Power saving
Your Pocket Hotspot will go to sleep if you don’t use it for ten
minutes. The screen will turn off, and so will your connection.
To wake your Pocket Hotspot up, press the Power button.
If you’re using the USB cable with your Pocket Hotspot, and
don’t connect anything to it within ten minutes, the wifi will
turn off. Hold the WPS button for about three seconds to
turn it back on again.
Getting the best indoor 3G signal
You’ll get the best reception if you put your Pocket Hotspot
near a window.
Getting the best wireless range
Plug your Pocket Hotspot into the mains charger to get the best
wireless range.
Overheating
Your Pocket Hotspot can get too hot if you use it for a long
time without a good flow of air around it. If it gets too hot, it’ll
switch off and disconnect from the network. Put it somewhere
with a good air flow and restart it.

35 36
Warranty, Safety and
Regulatory Guide
Please read before proceeding
Warranty
This product is warranted for 24 (Twenty Four) months from the date the device was
originally purchased. Please ensure you keep your proof of purchase in a safe place.
The warranty can only be used against presentation of your proof of purchase (receipt).
The warranty is valid in the United Kingdom. For batteries and chargers, the warranty
shall be 12 months from the date of original purchase. For support inquiries about ZTE
products and services, you should first contact your retailer or Operator by phone or by
visiting their website. For further enquiries, please contact Mo[email protected]n
ZTE Customer Services can be reached at: [phone]
Article 1
The manufacturer guarantees that the device will function with proper usage and
maintenance according to the instructions of the manufacturer. The guarantee covers
all device faults which came to be because of eventual errors in the material and/or the
manufacturing of the device.
Article 2
The warranty does not cover faults occurring because of unauthorised modifications to
the software, mechanical damages, improper handling, and higher forces (lightning, fire,
unsuitable voltage and polarities, traffic accidents, humidity, water and alike), batteries
and consumable material including
a) Damages caused by using the device in contravention of the manufacturer
instructions and other documentation which is enclosed with the device as well as
damages caused by using the device with non manufacturer approved devices
b) Damages caused by accidents, improper and wrong usage, floods, fire, earthquakes
and superficial damages which include but are not limited to scratches, dents, broken
plastic and alike
c) Damages caused by servicing (including upgrading and extension) by an
unauthorised person as well as a fault of the device or any part of it if they are
altered because of the change of the functionality or other properties without prior
written authorisation of the manufacturer;
d) Consumable parts other than in the case of damage brought on because of faults in
the material or manufacturing;
e) Impossibility of partial and/or complete usage of the device because of unauthorised
modification of the software.
Article 3
The manufacturer is obliged during the warranty, within a reasonable time frame, to
remove all reported faults and defects of the device which have arisen through proper
and regular use of the device, to repair the device in an authorised service centre or a
replacement of the faulty device with the same but properly working device if a repair
is not possible.
Article 4
The warranty is invalidated if:
• the information from the proof of purchase (invoice) is erased or altered
• the information on the device (type, and serial number of the manufacturer) are
erased or altered
• it is established that the device was opened by an unauthorised person.
Faults or damages which are not covered by the warranty include:
1. Damages caused by intentional separation, opening or disassembling
2. Damages or faults with the operation caused by the removal and insertion of exterior
and interior parts of the device
3. Damages caused by holes in the enclosure
4. Cracked glass or LCD because of misuse or accident caused by the user
5. Damages or faults caused by liquids
6. Damages or faults caused by liquid or dry chemical substances (such as gasoline,
acids, corrosive material), dust, dirt and other foreign objects
7. Damages or faults caused by outside heat or fire (damage by interior heat is covered
if it did not occur through an outside reason)
8. Superficial damages occurring through external reasons, including dents, shabbiness,
scratches on the enclosure, discoloration, cracks, peeling or metal or plastic parts of
the enclosure.
You are advised to regularly make copies of your information and other contents on the
device and to erase the same from the memory of the device before handing the device
over to any relevant third party service agent. If you do not do this, the manufacturer
is not responsible for the loss of information in the memory of the device to you or a
third party.
Limitation of Damages
TO THE EXTENT PERMITTED BY APPLICABLE LAW, THIS LIMITED WARRANTY IS YOUR
SOLE AND EXCLUSIVE REMEDY AGAINST ZTE AND ZTE’S SOLE AND EXCLUSIVE
LIABILITY IN RESPECT OF DEFECTS IN PRODUCT. HOWEVER, THIS LIMITED WARRANTY
SHALL NOT EXCLUDE OR LIMIT ANY OF YOUR LEGAL (STATUTORY) RIGHTS UNDER THE
APPLICABLE NATIONAL LAWS. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ZTE
DOES NOT ASSUME ANY LIABILITY FOR LOSS OF OR DAMAGE TO OR CORRUPTION
OF DATA, FOR ANY LOSS OF PROFIT, LOSS OF USE OF PRODUCTS OR FUNCTIONALITY,
LOSS OF BUSINESS, LOSS OF REVENUES OR LOSS OF ANTICIPATED PROFIT, INCREASED
COST OR EXPENSES OR FOR ANY INDIRECT, OR SPECIAL OR CONSEQUENTIAL LOSS OR
DAMAGE. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ZTE’S LIABILITY SHALL BE
LIMITED TO THE PURCHASE VALUE OF THE PRODUCT. THE ABOVE LIMITATIONS SHALL
NOT APPLY TO DEATH OR PERSONAL INJURY CAUSED BY DEFECT OF THE PRODUCT IN
MATERIAL, DESIGN AND WORKMANSHIP.
Important health and safety precautions
When using this product, retain and follow all product safety and operating instructions.
Observe all warnings in the operating instructions on the product.
Handle the battery pack carefully
• Store the battery in a cool, ventilated place away from direct sunlight.
• All batteries have a limited life – which becomes shorter and shorter the more you