7
16
1
3
2
2
30
1.2.1 Suction line
nProvide a sufficiently stable and
leveled surface. Ensure that the
housing does not touch the furniture
to avoid noise production by
resonances.
nIf necessary the unit can be leveled by
turning the feet up/down (Fig.1).
nPlug in the muffle of the enclosed
suction hose to the intake nozzle (2)
and the other side firmly to your intake
system.
Use the enclosed 90° adaptor if
running sideways.
1.2 Installation of the extraction system
1 Closure
2 Exhaust connection
3 Filter door
16 Diffusor
30
Exhaust Adaptor
1.2.2 Exhaust
nIf using the unit in non-stop operation,
the exhausting air temperature is
increased.
nTo avoid overheating, the exhausting
air must be able to flow out and
spread free.
nIf this is not possible, the diffusor can
be removed and the exhausting air
can be guided with a DN75 hose or
pipe (Fig.2). Therefore use the optional
exhaust-adaptor RD72/DN75 O.No.
896/1103
nTo connect the diffusor to the DN75
hose or pipe you will need the optional
diffusor-holder O.No. 556/0057 (Fig.3)
nAlternatively it is recommended to
giude the exhaust air to the outside.
Fig. 1
Fig. 2
