Zukt ZSL-48W User manual

Mack Marshall Lighting Pty Ltd
PO Box 7, Lonsdale
South Australia, 5160
zükt www.zukt.com.au
LED Shop Light - Installation Instructions ZSL-48W
PLEASE ENSURE THAT YOU INSTALL AND USE THIS PRODUCT ACCORDING TO
THE INSTRUCTIONS BELOW TO ENSURE CORRECT INSTALLATION AND NORMAL
FUNCTIONING OF YOUR zükt LED Shop Light PRODUCT.
Cautions
1. Please read this guide carefully before installing or maintaining this equipment.
2. Do not change or tamper with any internal electric circuits for any reason.
3. Keep product in a dry environment in order to avoid any electricity leakage.
4. Please do no insert any objects of any kind into the LED product to avoid an electric shock,
malfunction or damage of the products.
5. Designed for industrial and commercial use only.
6. This luminaire shall, under no circumstances, be covered with building insulation or be installed in
a residential installation.
Internal inline fuse fitted - 2.0A
Not for use with any fluorescent lamps
Use only zükt T1012 Series lamps
www.zukt.com.au
WARNING
zükt

Mack Marshall Lighting Pty Ltd
PO Box 7, Lonsdale
South Australia, 5160
zükt www.zukt.com.au
LED Shop Light - Installation Instructions ZSL-48W
PLEASE ENSURE THAT YOU INSTALL AND USE THIS PRODUCT ACCORDING TO
THE INSTRUCTIONS BELOW TO ENSURE CORRECT INSTALLATION AND NORMAL
FUNCTIONING OF YOUR zükt LED Shop Light PRODUCT.
Installation
1. Turn power o at mains.
2. Refer to diagrams for further installation.
3. Turn power on at mains.
Congratulations on the purchase of your new zükt LED product!
Internal inline fuse fitted - 2.0A
Not for use with any fluorescent lamps
Use only zükt T1012 Series lamps
www.zukt.com.au
WARNING
zükt
Flip the two sprinf clips inwards and insert into
moundting hole - clips will spring into place
4
5
Prepare mounting hole -
227mm x 130mm
1
2
Clear install area of any
insulation and debris.
3Insert plug into socket
Flip the two sprinf clips inwards and insert into
moundting hole - clips will spring into place
4
5
Prepare mounting hole -
227mm x 130mm
1
2
Clear install area of any
insulation and debris.
3Insert plug into socket
Flip the two sprinf clips inwards and insert into
moundting hole - clips will spring into place
4
5
Prepare mounting hole -
227mm x 130mm
1
2
Clear install area of any
insulation and debris.
3Insert plug into socket
Flip the two sprinf clips inwards and insert into
moundting hole - clips will spring into place
4
5
Prepare mounting hole -
227mm x 130mm
1
2
Clear install area of any
insulation and debris.
3Insert plug into socket