ZyXEL Communications P-660R-D Series User manual

P-660R-D Series
ADSL2+ Access Router
Quick Start Guide
Version 3.40
10/2005

P-660R-D Series Quick Start Guide
2
Overview
The Prestige 660R-D (P-660R-D) ADSL2+ Access Router is the ideal
device for small networks connecting to the Internet via ADSL.
See your User’s Guide for background information on all features.
1 Hardware Connections
If you prefer to see a multi-media animation of how to make hardware
connections, see the included CD.

P-660R-D Series Quick Start Guide
3
1DSL: Connect the Prestige to a telephone jack using a telephone wire.
2 LAN 10/100M: Use an Ethernet cable to connect a computer to the LAN
port for initial configuration and/or Internet access.
3POWER: Use the included power adaptor to connect the POWER
socket to an appropriate power source.
After you’ve made the connections, push in the power button to turn on the
Prestige. Look at the front panel LEDs. The PWR/SYS LED blinks while
performing system testing. The PWR/SYS LED then turns steady on if the
testing is successful. The 10/100M LED turns on if the LAN port is properly
connected.
2 Configuration for Internet Access
You may configure the Prestige for Internet access in any one of these
ways:
• Configuration Genie
• Zero Configuration
•Web Configurator Internet Access Wizard

P-660R-D Series Quick Start Guide
4
Note: Configuration genie or Zero configuration are only able to
configure the device automatically for Internet access if you are
using PPPoE, PPPoA or ENET ENCAP encapsulation with a
dynamically-assigned IP address from your ISP.
If you’re not using these Internet access settings, then use the
Web Configurator Internet Access Wizard to manually
configure the device.
You will need your Internet access information such as user name and
password if given by your ISP.
INFORMATION From ISP Encapsulation Method you are using
None RFC1483 in bridge mode with a dynamic IP address
or ENET ENCAP with a dynamic IP address
An IP address only RFC1483 in routing mode with a static IP address
A user name and password (and
an IP address)
PPPoA or PPPoE encapsulation (with a static IP
address)
An IP address, subnet mask and
a gateway IP address
ENET ENCAP with a static IP address

P-660R-D Series Quick Start Guide
5
2.1 Configuration Genie
From the included CD, click “Multimedia Auto Provisioner” (the installation
and configuration assistant) and then click “Installation Tutorial”. After you’ve
viewed the tutorial, click “Configuration Genie” at the end of the installation
tutorial or from “Multimedia Auto Provisioner” in the CD.
2.2 Zero Configuration
Launch your web browser and
navigate to any web site (for
example, www.zyxel.com). The
Prestige automatically detects
and configures your Internet connection. This may take about two minutes.
If you have a PPPoE
or PPPoA
connection, a screen
displays prompting
you to enter your
Internet account
information. Enter the
username, password
and/or service name
exactly as provided. Click Apply.

P-660R-D Series Quick Start Guide
6
2.3 Web Configurator Internet Access Wizard
2.3.1 Accessing the Web Configurator
1Launch your web browser. Enter “192.168.1.1” as the web site address.
Note: If you do not see the next screens, then please read Section 4.1
on page 17.
2Click Login.
3Type a new password (retype it to confirm) and click Apply. Otherwise
click Ignore. You then see the main web configurator screen.

P-660R-D Series Quick Start Guide
7
4In the Site Map screen, click Wizard Setup.

P-660R-D Series Quick Start Guide
8
2.3.2 Internet Access Setup
1Configure the Internet access settings in this step. The wizard screens
vary depending on the Mode and Encapsulation you chose in the first
wizard screen.
Note: Enter the Internet access information given by your ISP exactly
in each wizard screen. If not given, leave the fields set to the
default.
RFC 1483
A) Select Routing
if your ISP gave
you an IP
address and
allows multiple
computers to
share an
Internet
account.
Otherwise,
select Bridge.
Then select
RFC 1483.
B) Click Next.
A
C
D
BE

P-660R-D Series Quick Start Guide
9
C) If you selected Routing, enter the IP address given by your ISP.
D) If you selected Routing,select SUA Only when you have one public IP
address, Full Feature when you have more than one public IP address
(for translation) or None to disable NAT.
E) Click Next.
ENET ENCAP
A) Select
Routing,
then
ENET
ENCAP.
B) Click
Next.
C) If your
ISP gave
you an IP
address,
subnet
mask and
gateway
address, select Static IP address and enter them. Otherwise, select
Obtain an IP Address Automatically.
A
C
D
B
E

P-660R-D Series Quick Start Guide
10
D) Select SUA Only if you have one public IP address, Full Feature if you
have more than one public IP address (for translation) or None to
disable NAT.
E) Click Next.
PPPoE
A) Select
Routing,
then
PPPoE.
B) Click
Next.
C) Enter the
service
name,
username
and
password
given by
your ISP.
D) If your
ISP gave
you an IP address, select Static IP address and enter it. Otherwise,
select Obtain an IP Address Automatically.
A
D
B
FG
E
C