ZZ2 ZZAIR-CP User manual

10.15.2020
oner fcor ire o irele rl
ZZAIR-CP

2
1 - Content
•ZZAIR-CP Interface • Manual
- erew
12
3
 - Red D - There is no phone connected to the ZZAIR-CP.
 - lue D - There is a phone connected to the ZZAIR-CP.
3 -  input - The input can be used to charge the phone.
10.15.2020

3
- an en
123
1 - ome Factory radio screen
2 - earch for new devices
3 - Change anguage
- How to par wth an Phone
•Plug the ZZAIR-CP unit into the factory CarPlay  input.
•The factory radio will ready it as an iPhone and the CarPlay icon will be available on the
screen. elect the CarPlay option and the ZZAIR-CP main menu will be displayed on the
screen.
•Turn the luetooth and WiFi O. Go to ettings  luetooth > ON and then WiFi > ON.
10.15.2020

4
•at ntl ZZAIR-CP n or Phone.
•ner ther eces o ll select the ZZAIR-CP hch ens th the ran o the ehcle
olloe  a - an  ts. nce that s selecte please tap on Pair  Allow an nall
se CarPla.
•elect the phone on the screen to connect to ZZAIR-CP.
10.15.2020

5
5- How to delete a phone from the ZZAIR-CP
•Turn the bluetooth option in your iPhone OFF.
•With ZZAIR-CP connected into the car USB input, select CarPlay mode on your factory
screen.
•On the right side of the screen all devices connected to ZZAIR will be displayed.
•Tap and hold the name of the iPhone for 3 seconds and the option to delete the device will be
available.
Press the "Delete" button to remove the device from the ZZAIR memory
10.15.2020

6- How to update the ZZAIR-CP
610.15.2020
Our team is constantly making improvements to our ZZAIR-CP. The updates expand
compatibility, improving usage and functionality. In order to update your ZZAIR follow the steps
below:
•Make sure the ZZAIR is connected to the car and you have your phone paired to the ZZAIR
and CarPlay is visible on the screen.
•On your iPhone go to SAFARI and enter 192.168.50.2
•The phone will communicate with the ZZAIR via Bluetooth. If your device is not up to date, a
message on your phone stating a new software is available will appear.
•Tap on the button to update the ZZAIR and wait for the loading bar to reach 100%. This
process may take up to 6 minutes.
•Once the update is complete, the ZZAIR will reboot and reconnect with your device
automatically. This completeq the update.

[email protected]
929-220-1212
Toll free: 877-241-2526
www.zz-2.com
10.15.2020