2gig Technologies Alarm.com ADC-IS-100-GC User manual

Alarm.com Image Sensor for 2GIG Go!Control Installation Guide
1 Copyright © 2012 Alarm.com. All rights reserved. Rev 1.0-Beta
PRODUCT SUMMARY
Highlighted Features
HARDWARE COMPATIBILITY & REQUIREMENTS
Security Control Panel:
Communication Module:
Required Radio:
Available Zones:
HARDWARE INSTALLATION
IMPORTANT:
1. Create Alarm.com Customer Account-
2. Verify module & XCVR2 radio installation-
3. Register Module and Test-
4. Enroll Sensor in Panel-
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
5. Choose Sensor Location and Mount
a. Determine sensor mounting location
b. Verify RF communication prior to mounting
c. Determine desired mounting angle
d. Choose applicable mounting bracket
e. Place sensor with arm on mounting bracket.
f. Secure the mounting arm location
6. Complete PIR Testing
7. Test Image Capture

Alarm.com Image Sensor Installation Guide
2 Copyright © 2012 Alarm.com. All rights reserved. Rev 1.0
PIR Lens and Camera Coverage Diagrams
INSTALLATION GUIDELINES
Range
False Alarm Immunity
Capture Orientation
Lighting Conditions
PROGRAMMING
A. PIR Sensitivity Settings
B. PIR Activation and Test Mode
C. Tamper and Malfunction Reports
D. Sensor LED
E. Image Capture Settings
SENSOR RESET BUTTON
BATTERY REPLACEMENT

Alarm.com Image Sensor Installation Guide
3 Copyright © 2012 Alarm.com. All rights reserved. Rev 1.0
OTHER FEATURE COMPATIBILITY
Two-Way Voice Compatibility
TS1 Compatibility
TROUBLESHOOTING
Sensor Not Enrolling
Sensor Non-Responsive
False Motion Activations
Sensor Tamper
Images Not Captured
Image Sensor Red Status LED Activity Reference
Device Status
or Error
LED
Pattern Duration of LED Pattern
TECHNICAL SPECIFICATIONS
Alarm.com Model Number
2GIG Part Number
Power Source
Expected Battery Life
Voltage Thresholds
Operating Temperature Range
Weight
Dimensions
Supervisory Interval
Color
Recommended Mounting Height
Recommended Mounting Angle
Motion Profiles & Sensor Range