2K FURNITURE DESIGN B1310 User manual

ASSEMBLY INSTRUCTIONS
ITEM NO:B1310/B1311
Parts & Hardware List
Page 1 of 3
Quantity of 2
Quantity of 2
Quantity of 2
Quantity of 1
Quantity of 2
Quantity of 2
Quantity of 2
Important Notice:
This support rail is designed to be used
either on metal bed frame or wooden
platform bed. Please follow the steps
below.
Quantity of 1

Page 2 of 3
2 Pcs
2 Pcs
Use Bolt #2 & Nut #3 to assemble the support rail to the
Bed Frame.
NOTE: To attach this support rail to a metal bed frame, the bed frame
needs to have pre drilled holes on the side rails, some bed frames may
not have holes on the side rails. if there are no holes on the side rails of
the frame, you will need to pre-drill the holes so that the the support
can be attached to the frame with bolts.
Fig 1
Fig 1
option 1
option 2
for height
7.5"-10"
for height
10"-14"
Option 1
To be used on a metal bed frame

Page 3 of 3
option 1
option 2
Tool:
Phillips Head Screwdriver
(Not Provided)
2 Pcs
2 Pcs
Fig 3
Fig 3
for height
7.5"-10"
for height
10"-14"
Option 2
For wooden platform bed
2 Pcs
2 Pcs
2 Pcs
Fig 2
Fig 2