2K FURNITURE DESIGN PS25 User manual

1:Top Panel with Drawer 1PC 2: Back Leg 1PC
3(L/R):Front Leg 2PCS 4:Bottom Panel 1PC
B1 Bolt with Washer
2sets
B2 Bolts with Nut
4sets
B3 Screw
3pcs

Step 1: Remove the drawer from Top Panel 1.
Step 2: ssemble Back Leg 2 to Top Panel 1 using Bolts with Washers B1.
Please do not tighten Bolts B1 until Step 3.
Step 3: ssemble Front Legs 3 to Top Panel 1 using Bolts with Nuts B2.
Please do not tighten Bolts B2 until Step 3.
1
2
1
2
3R
3L

Step 4: ttach Bottom Panel 4 to Legs 2 &3 using Screws B3.
Then tighten Bolts B1 and B2 at this point.
1
2
3L
3R
4
Step 5: Unscrew the knob that is attached to the back of the drawer panel, and attach it to the
front of the drawer front panel using the same bolt.
Step 6: Insert the drawer into the unit.
Note: Please make sure to slightly incline the drawer so that the plastic guide should catch
the wood glide.
Plastic Guide