2K FURNITURE DESIGN B8026K User manual

NOTE TO CUSTOMERS:
For ease and speed of assembly we recommend that before you commence each step of the
assembly that you identify all the parts required to complete that step.
We recommend that where possible you allow sufficient space to assemble the item as close
as possible to the place where it will be once assembled.
For the protection of your furniture we recommend that the product is placed on a dry, soft,
smooth and clean surfaces during assembly to prevent any damage. Avoid damp and direct
sunlight.
During assembly do not over tighten the screws or bolts, as this may damage the product.
Please ensure you retain all the product packaging until the item is completely assembled.
Periodically check all fitting and re-tighten as necessary.
Never allow any liquids to remain on your furniture as absorption can cause the wood to warp
or finish to de-laminate.
It is recommended that this item should be assembled by two adults.
ASSEMBLY INSTRUCTIONS
MODEL # B8026K KING BED
PAGE 1 OF 3

ITEM #B8026K KING BED
1Quantity:
Headboard
12Quantity:
Headboard Leg- Right
1pc 3Quantity: 1pc 4Quantity:
Footboard
1pc 5Quantity:
Footboard Leg
2pcs
6Quantity:
Side Rails
2pcs
Headboard Leg- Left
7Quantity:
Side Rails
2pcs 8Quantity:
Slat Support Bar
4pcs 9Quantity:
Side Rails Supporter
2pcs 10 Quantity:
Slats
4pcs
11 Quantity:
Support Legs
8pcs
AJCBC Bolts M8 x 20mm
Quantity: 8 pcs
Ø 5/16”
25/32”
BJCBC Bolts M6 x 25mm
Quantity: 8 pcs
Ø 15/64”
1”
Parts Identification
Hardware List
CJCBC Bolts M6 x 35mm
Quantity: 24 pcs
Ø 15/64”
1 3/8”
DJCBC Bolts M6 x 50mm
Quantity: 6 pcs
Ø 15/64”
2”
EJCBC Bolts M6 x 70mm
Quantity: 2 pcs
Ø 15/64”
2 3/4”
FWooden Dowel
Quantity: 2 pcs
GSpring Washer
Quantity: 30 pcs
HFlat Washer
Quantity: 30 pcs
Ø 5/32”
1 17/64”
IScrew M4 x 32mm
Quantity: 8 pcs
JL-Key M5
Quantity: 1 pc
L-Key M4
Quantity: 1 pc
K
STEP 1

ITEM #B8026K KING BED
PAGE 3 OF 3
STEP 2 STEP 3
STEP 4
STEP 5 STEP 6
7
6
7
6