2K FURNITURE DESIGN CR1439 User manual

Style # CR1439/CR1438/CR1437/CR1436
Coat Rack with Storage
ASSEMBLY INSTRUCTIONS
Page 1 of 12

Pre-Assembly:
Please read all instructions before beginning assembly.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
Prepare a soft clean surface for assembly.
To guard against color transfer, do not assemble directly on carpet, flooring, or other sensitive coverings.
Please do not over tighten cam locks. Please turn cam locks clockwise and stopwhen you feel tight.
If the cam nuts won’t turn or can’t catch the cam pins, you cantighten or loosen the cam pins a little bit and try again.
Instruction of Using Cam Lock
Page 2 of 12

(1). Quantity Of 2 Post
(2). Quantity Of 2 Post
(3). Quantity Of 2 Post
(4)
. Quantity Of 2 Post
(5) Quantity Of 1 Top Panel
(6). Quantity Of 1 Shelf w/ Drawer
(7). Quantity Of 1 Shelf
(8). Quantity Of 4 Bottom Post
(9). Quantity Of 1 Bottom Panel
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean padded surface.
Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly,
carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will
cause damage.
Page 3 of 12

Assembly Tool Required: Phillips Screwdriver (Not Included).
(A). Quantity Of 20 Bolt
(B). Quantity Of 20 Spring
washers
(C). Quantity Of 20 Flat washers
(D). Quantity Of 1 Allen Wrench
(E). Quantity Of 16 Screw
(F). Quantity Of 8 Metal Hook
(G). Quantity Of 1 Knob with bolt
Page 4 of 12
Hardware List

Step 1:
Page 5 of 12
Assembly Instructions
Connect the two Posts (1) together as above shown.
Assemble other Posts (2), (3) and (4) in the same way.

Assembly Instructions
Step 2:
Page 6 of 12
Assemble Posts (1), (2), (3), (4) to Top Panel (5) and Shelf w/Drawer (6) using Bolts (A)
with Spring Washers (B) & Flat Washers (C) byAllen Wrench (D).
Note: Please do not tighten bolts until all of them are attached.

7
Page 7 of 12
Assembly Instructions
Step 3:
Assemble shelf (7) to Posts (1),(2),(3),(4) using bolts (A) with spring washers (B) & flat
washers(C) by Allen Wrench.

Assembly Instructions
Step 4:
Page 8 of 12
Assemble Bottom Posts (8) to Shelf (7) using Bolts (A) with Spring Washers (B)& Flat
Washers (C) by Allen Wrench.

Assembly Instructions
Step 5:
5
Assemble the Bottom Panel (9) to Bottom Legs (8) using Bolts (A) with Spring Washer(B)
and Flat Washers (C).
Note: Please do not tighten bolts until all of them are attached.
Page 9 of 12

Assembly Instructions
Page 10 of 12
Step 6:
Attach hooks (F) to Top Panel (5) using
Screws (E).