2K Furniture Designs D6500 User manual

NOTE TO CUSTOMERS:
For ease and speed of assembly we recommend that before you commence each step of the
assembly that you identify all the parts required to complete that step.
We recommend that where possible you allow sufficient space to assemble the item as close
as possible to the place where it will be once assembled.
For the protection of your furniture we recommend that the product is placed on protected
surfaces during assembly to prevent any damage.
During assembly do not over tighten the screws or bolts, as this may damage the product.
Please ensure you retain all the product packaging until the item is completely assembled.
Periodically check all fitting and re-tighten as necessary.
Never allow any liquids to remain on your furniture as absorption can cause the wood to warp
or finish to de-laminate.
It is recommended that this item should be assembled by two adults.
ASSEMBLY INSTRUCTIONS
MODEL # D6500 - TRESTLE LEG DINING TABLE
PAGE 1 OF 4

PAGE 2 OF 4
ASSEMBLY INSTRUCTIONS ITEM # D6500 - TRESTLE LEG DINING TABLE
PARTS IDENTIFICATION
A- Table Top 1 pc
B- Trestle Leg 2 pcs
C- Mounting Plate 2 pcs
HARDWARE IDENTIFICATION
1- JCBB Bolt M8 x 40mm 12 pcs
5- Allen Key M5 x 2 1/2” 1 pc
NOTE: Quantities shown are for one table. Bolts are metric screw threads
Ø8mm
1 1/2”
D- Stretcher
1 pc
4- Hex Nut 5/16” x 12.5 x 6.5mm 4 pcs
Ø 5/16”
2- Lock Washer M8 x 13.5 x 1.8mm 16 pcs
3- Flat Washer M8 x 18 x 1.2mm 16 pcs
6- Wrench 12.8mm 1 pc
7- Wood Plug 19 x 9mm 4 pcs

PAGE 3 OF 4
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
ITEM # D6500 - TRESTLE LEG DINING TABLE
1
2
35
D
B
4
3
6
2
C
R
E
M
O
V
E
R
E
M
O
V
E
Must Remove
5
1
2
3

PAGE 4 OF 4
ASSEMBLY INSTRUCTIONS
STEP 4
ITEM # D6500 - TRESTLE LEG DINING TABLE
STEP 3 STEP 4
STEP 5
2
1
3
5
Flip up Apron
7
A
Unlock
Metal Catches
Lock
Metal Catches