2K Furniture Designs BK 1561 User manual

NOTE TO CUSTOMERS:
For ease and speed of assembly we recommend that before you commence each step of the
assembly that you identify all the parts required to complete that step.
We recommend that where possible you allow sufficient space to assemble the item as close
as possible to the place where it will be once assembled.
For the protection of your furniture we recommend that the product is placed on a dry, soft,
smooth and clean surfaces during assembly to prevent any damage. Avoid damp and direct
sunlight.
During assembly do not over tighten the screws or bolts, as this may damage the product.
Please ensure you retain all the product packaging until the item is completely assembled.
Periodically check all fitting and re-tighten as necessary.
Never allow any liquids to remain on your furniture as absorption can cause the wood to warp
or finish to de-laminate.
It is recommended that this item should be assembled by two adults.
ASSEMBLY INSTRUCTIONS
MODEL #BK 1561 STORAGE UNIT
PAGE 1 OF 2

PAGE 2 OF 2
ASSEMBLY INSTRUCTIONS ITEM # BK1561 STORAGE UNIT
PARTS IDENTIFICATION
P1 Quantity: 2
Top/Bottom Panel
P2 Quantity: 2
Side Panel
P3 Quantity: 1
Middle Panel
P4 Quantity: 2
Back Panel
P5 Quantity: 2
Shelve Panel
HARDWARE LIST
H1
1 1/2”
H2 H3 H5
H6
16 pcs
Corner Fitting
Quantity:
4 pcs
STEP 1
insert wooden dowels (H4) & (H5) into the
following parts respectively.
Quantity:
Ø 3/8”
Quantity:
16 pcs
Sticker
H4
Screw m3 x 20
Quantity:
4 pcs
Screw m9 x 1 1/2”
3/4”
16 pcs
Quantity:
Wooden Dowel
m6 x 25
2 pcs
Quantity:
Wooden Dowel
m6 x 50
P2 P3
2 pcs
H4
DETAIL A
DETAIL A
P5 P5
H4
H5
P5
P5
P3
H5
STEP 2
STEP 3
P1
P2
P2
P3
P2
P2
P3
P4
P4
P1
P3 P5
P5
P2
P2
P2
P2
P1
H6
H1
H2
H3
H3
H3
P2
P1