2K Furniture Designs SR 6451 User manual

NOTE TO CUSTOMERS:
For ease and speed of assembly we recommend that before you commence each step of the
assembly that you identify all the parts required to complete that step.
We recommend that where possible you allow sufficient space to assemble the item as close
as possible to the place where it will be once assembled.
For the protection of your furniture we recommend that the product is placed on a dry, soft,
smooth and clean surfaces during assembly to prevent any damage. Avoid damp and direct
sunlight.
During assembly do not over tighten the screws or bolts, as this may damage the product.
Please ensure you retain all the product packaging until the item is completely assembled.
Periodically check all fitting and re-tighten as necessary.
Never allow any liquids to remain on your furniture as absorption can cause the wood to warp
or finish to de-laminate.
It is recommended that this item should be assembled by two adults.
MODEL : #SR 6451 SHOE RACK
PAGE 1 OF 4

Base Bottom Panel
Divider Panel
Screw m4 x 28mm
8 pcs
8 pcs 2 pcs
16 pcs
2 pcs 2 pcs 8 pcs
64 pcs 16 pcs 16 pcs
15/9.5mm
1 2/16”
Quantity: 16
Top/Base Middle Panel Top/Base Lower Panel BaseTop PanelTop Panel
Sofa leg Pivot Bolt Revolving Plate (Top) Revolving Plate (Bottom)
(For The Revolving Plate)
9/64”
Screw m3.5 x 12mm
TOOLS REQUIRED
MALLET
H3 P1 P2
2 2
2 pcs
P4
CONNECTING BOLT
STEP 2
DETAIL B
DETAIL B
H4
PAGE 2 OF 4
ITEM: #SR 6451 SHOE RACK

P4 P5
H9
H10
P1
P6
H5
DETAIL C
H5
DETAIL C
DETAIL D
DETAIL D
STEP 4
STEP 6STEP 5
STEP 7 STEP 8
STEP 9 STEP 10
H1
H1
H1
P2
P6
P1
P3
P2
P1
P6
P6
P6
P6
P6
P6
P2
P1
P4
H7
H8
P3
P2
P1
P6
P4
H5
DETAIL C
P6
P2
PAGE 3 OF 4
ITEM : #SR 6451 SHOE RACK
P4

H5
DETAIL C
STEP 12
STEP 14STEP 13
STEP 11
STEP 15
P3
P3
P6
PAGE 4 OF 4
P6
P2 P6
H1
P3
P6
DETAIL D
DETAIL E
DETAIL E
P5
P2
P2
P1
P4
DETAIL D
H7
H8
H2
H6
P5
ITEM : #SR 6451 SHOE RACK
Turn the item upright, and it is ready to use.
P1
P2
P3
P4
P2
P3
P5
P6
P6
P6
P2
P4