2K Furniture Designs T999 User manual

ASSEMBLYINSTRUCTIONS
Page1of 12

1. Insertcamscrewinto holeasshown in diagramA.
Makesure notto insertthecamscrew:
Too deep as shown in figure Basthis will causethe
camscrewto bemisaligned and unableto
interlock properly.
Also avoid inserting thecamscrewtoo closeto the
surface oftheholeas shown in figure C, as this will
causethecamlock to betoo loose, and notinterlock
properly.
2. Connectthepanels together.
ARROWSIGN 3. When inserting thecamlockmakesure thearrow
ofthecamlock facesthecamscrew.
4. To tightenthecamlock turn thecamlock clockwise
90-180 degree oruntil thearrowis facing opposite
theplace camlock was inserted.
NOTE:DO NOT USE AN AUTOMATIC
SCREWDRIVERTOTIGHTENCAM LOCKS.
Toinsertacamlock:(Pleasereadbelowinstructionsbeforeassembling)
DiagramA
DiagramC
DiagramB
Note:
•Readtheseinstructions carefully before assembling.
•Tools required:Phillips screwdriver, flatscrewdriver.
•Findaclean,smoothareaonwhichtowork,suchasacarpet,inordertoavoidscratchingthewood
surfaces.
•Wait to disposeofthepacking materialuntil assembly is completeand all parts and hardware are
accountedfor.
•Two ormore peoplemight berequiredforassembly.
Page 2of 12

Part List
Page3of 12
1Quantity
of2 Quantity
of2 3Quantity
of2 4Quantity
of2
2
5Quantity
of4 6Quantity
of2 7Quantity
of2 8Quantity
of2
9Quantity
of2 10 Quantity
of2 11 Quantity
of2 12 Quantity
of2
13 Quantity
of1 14 Quantity
of1 15 Quantity
of1 16 Quantity
of2
17 Quantity
of1 18 Quantity
of1 19 Quantity
of1 20 Quantity
of2
21 Quantity
of1 22 Quantity
of1 23 Quantity
of1 24 Quantity
of1
25 Quantity
of1 26 Quantity
of1 27 Quantity
of1 28 Quantity
of1
Leftframe-Endtable Right frame-End table Top Panel-Endtable RearApron-Endtable
FrontApron-End table BackPanel-Endtable Shelf -Endtable Drawer frontPanel -Endtable
Drawer Left SidePanel-Endtable DrawerRightSidePanel-End table DrawerBackPanel-End table DrawerBottomPanel-End table
Leftframe-Coffee table Leftframe-Coffee table Top Panel-Coffeetable UpperApron-Coffee table
Shelf-Coffee table Divider-Coffee table Divider-Coffee table BackPanel-Coffee table
BottomPanel-Coffeetable LowerApron-Coffee table Center Leg-Coffee table Drawer FrontPanel-Coffeetable
Drawer Left Panel-Coffee table Drawer RightPanel-Coffeetable Drawer BackPanel-Coffee table Drawer BottomPanel-Coffee table

B: 8pcs
Step1:
B: 8pcs
A: 12sets
Step 2:
A
A
A
A
A
B
A: 12sets
A
A
B
B
B
A
B
A
X2
X2
Assemble Front Aprons (5), Back Panel (6) and Shelf (7) to Left Frame (1) using Camlocks(A) & Wood Dowels (B)
as shown above.
Assemble Front Aprons (5), Back Panel (6) and Shelf (7) to Right Frame (2) using Camlocks(A) & Wood Dowels
(B) as shown above.

B: 4pcs
Step 3:
Step 4:
C: 6pcs
B
B
C
C
C
A
A
A: 4pcs
12pcs
A:
8pcs
A:
B: 8pcs
A
A
A
B
B
X2
X2
Assemble Rear Apron (4) to the bottom of top panel (3) using Camlocks(A) & Wood Dowels (B), Screws (C) as
shown above.
Assemble Top Panel (3) to Left & Right Frame (1) (2)& Back Panel (6) using Camlocks(A) & Wood Dowels (B) as
shown above.

Step 5:
Step 6:
A: 8sets
C: 8pcs
A
C
C
F
A
X2
F: 2SETS
X2
Assemble Drawer Side Panels (9) & (10) to Drawer Back Panel (11) using Screws(C).
Insert Drawer Bottom Panel (12) into grooves on Drawer Side Panels(9) &(10).
Attach Drawer Front Panel(8) to Drawer Side Panels(9) &(10) using Camlocks (A) .
Attach Handle (F) to Drawer Front Panel (8)using included screws.
Insert the drawer into the cabinet of end table as shown above.

Step 7:
Step 8:
B
A
B: 2pcs
A: 3sets
B
A
A
A
A
B
B
B
B: 4pcs
A: 4sets
Assemble Lower Apron (22) to Bottom Panel(21) using Camlocks(A) & Wood Dowels (B) as shown above. Then
tighten Center Leg(23) to the bottom of bottom panel (21).
Assemble Dividers (18) & (19) to Shelf (17) using Camlocks(A) & Wood Dowels (B) as shown above.

Step 9:
Step 10:
G
G
G
B
B
B: 4pcs
G: 4sets
Assemble Bottom Panel(21) to Dividers (18) &(19) using Wood Dowels (B) & Screws (G) as shown above.
Insert Back Panels (20) into grooves on Shelf (17 ) & Bottom Panel (21) as shown above.

Step 11:
Step 12:
B
B
B
B
BB
B
A
A
A
A
A
A
A
B
B: 12pcs
A: 12sets
B
B: 2pcs
D: 8SETS
D
Assemble Left & Right Frame(13) &(14) to Bottom Panel(21) , Shelf (17) and Upper Aprons (16) using Camlocks
(A) & Wood Dowels (B) as shown above.
Assemble Top Panel (15) to Side Frames (13 )&(14), Upper Aprons(16) using Wood Dowels (B) & Bolts with
washers (D) as shown above.

Step 13:
Step 14:
A: 8sets
C: 8pcs
A
C
C
F
A
F: 2SETS
X2
Assemble Drawer Side Panels (25) & (26) to Drawer Back Panel (27) using Screws(C).
Insert Drawer Bottom Panel (28) into grooves on Drawer Side Panels(25) &(26).
Attach Drawer Front Panel(24) to Drawer Side Panels(25) &(26) using Camlocks (A) .
Attach Handle (F) to Drawer Front Panel (24)using included screws.
Insert the drawer into the cabinet of coffee table as shown above.

Step 15: E: 8sets
A
Attach Plastic Connect Blocks (E) to Bottom Panel (21) to hold Back Panel (20) & Dividers (18) &(19), Shelf (17)
using included Screws as shown above.