3Com LANplex 6000 User manual

DATA SHEET
Key Benefits
Simple—Yet
Advanced
Simple to Install
Installing the 3Com®11 Mbps
Wireless LAN Access Point 6000 takes
as little as 60 seconds. Plug it into a
power source and a switch or hub (if
it is to be connected to a wired LAN),
and the access point becomes immedi-
ately visible to wireless clients. DHCP
support allows automatic assignment
of client IP addresses without any
manual configuration.
The Access Point 6000 also
features Clear Channel Select and
Power-over-Ethernet, which further
simplify installation and ensure
quality connections.
Easy to Use
The access point is extremely easy
to configure. After launching the
management software tool, a list of all
access points on the respective IP
subnet is displayed. Once the access
point to be configured has been
selected, an intuitive directory will
provide step-by-step guidance
through the configuration process.
The access point’s Auto Network
Connect feature lets users roam the
corporate campus, even across
IP router boundaries, without losing
connections.
Reliable Operation
Dynamic rate shifting automatically
chooses the best connection speed
(11, 5.5, 2, or 1 Mbps) for wireless
users, depending upon signal
strength and distance from the access
point. This ensures reliable connec-
tions even at long ranges or in noisy
environments.
Highly Secure
This access point delivers advanced
security, including 3Com Dynamic
Security Link technology*. Unlike
shared-key schemes, this technology
automatically generates a new 128-bit
encryption key for each session—
providing a much higher level of
security than static shared-key
schemes. This also frees users from
the hassle of entering confusing
keys manually. Wireless clients also
have 40- and 128-bit WEP encryption
(where allowed by law) and user
authentication available for up
to 1000 users.
The 3Com 11 Mbps Wireless LAN
Access Point 6000 ensures wireless
connections are reliable and setup
is easy. Wireless networks can be
created or extended in minutes—
without the need for dedicated
on-site technical support. A simple
setup and easy-to-follow wizards keep
installation uncomplicated. Plug it in,
and connect wirelessly within the
100-meter (328 feet) range.
3Com®11 Mbps Wireless LAN
Access Point 6000
*Works only when used in conjunction with the 3Com 11 Mbps Wireless LAN PC Card with XJACK®antenna.

3COM®11 MBPS WIRELESS LAN ACCESS POINT 6000
3Com Corporation, Corporate Headquarters, 5400 Bayfront Plaza, P.O. Box 58145, Santa Clara, CA 95052-8145.
To learn more about 3Com solutions, visit www.3com.com. 3Com Corporation is publicly traded on Nasdaq under the
symbol COMS.
Copyright © 2002 3Com Corporation. All rights reserved. 3Com and XJACK are registered trademarks of 3Com
Corporation. Wi-Fi is a trademark of the Wireless Ethernet Compatibility Alliance. All other company and product
names may be trademarks of their respective companies. While every effort is made to ensure the information given is
accurate, 3Com does not accept liability for any errors or mistakes which may arise. Specifications are subject to change
without notice. 400747-001 05/02
Product Name Region Order Number
3Com®11 Mbps Wireless LAN Access Point 6000 US and Canada 3CRWE60092A
Europe and Latin America 3CRWE60092A-E1
Asia/Pacific Rim 3CRWE60092A-A1
France and Singapore 3CRWE60092A-FR
Japan 3CRWE60092A-JP
South Korea 3CRWE60092A-SK
Israel 3CRWE60092A-IS
Russia 3CRWE60092A-RU
Use the 3Com 11 Mbps Wireless LAN Access Point 6000 with these 3Com products:
3Com 11 Mbps Wireless LAN PC Card with XJACK® Antenna 3CRWE62092A
3Com 11 Mbps Wireless LAN Building-to-Building Bridge 3CRWE90096A
3Com 11 Mbps Wireless LAN Workgroup Bridge 3CRWE83096A
3Com Ethernet Power Source, 12-Port 3C10220
3Com Ethernet Power Source, 24-Port 3C10222
Ordering Information
Performance
Connection speeds up to
11 Mbps within a range of
100 meters (328 feet)
65 simultaneous user support
Dynamic rate shifting between
11, 5.5, 2, and 1 Mbps as condi-
tions and distances change
Embedded DHCP server auto-
matically assigns IP addresses,
ensuring users always have a
valid IP address. In instances
with existing on-site DHCP
server, the access point’s DHCP
server recognizes this and acts
as a pass through
Network Management
An embedded HTTP web server
in each access point works with
any web browser that supports
XML for easy web configura-
tion, firmware upgradability,
and management. Additional
management support includes
SNMP and 3Com Network
Supervisor.
Standards Conformance
Wi-Fi certified
IEEE 802.11b
Safety and Electromagnetic
Conformance
Safety: EN60950/A11, IEC 950,
CSA22.2#950, UL 1950
Radio: FCCCFR 47 Part 15.247
(249) and 15.209, RSS-139,
ETS 300 328, ETS 300 826,
RCR STD-33
Environmental: EN6068
Electromagnetic compatibility:
ICES-003, FCC Part 15 Class B,
ETS 300 826, CISPR 22/EN55022
Class B
Physical Dimensions
Length w/antenna perpendicular:
208 mm (8.172 in)
Length w/antenna parallel:
253 mm (9.966 in)
Width at widest point:
144 mm (5.673 in)
Height at thickest point:
41 mm (1.610 in)
Height w/antenna perpendicular:
84 mm (3.321 in)
Environmental Operating
Ranges
Temperature: 0 to 55°C
Humidity: 10 to 90%
noncondensing
Altitude: Up to 3000 m (9800 ft)
Warranty
One-year limited warranty
90-day unlimited software
upgrades and phone support
Specifications