3dsimo KIT 2 User manual

This instruction is created as scalable vector graphics.
If you want to see detailed view you can zoom with no
decrease of quality.
All of used components in current assembly step are
marked with yellow colour.
This instruction is also Grayscale printer friendly
3DSIMO KIT 2 is Open-Source project.
You may find assembly part with different geometry
according to this instruction or product pictures.
If you have any questions, feedback or idea for improvement,
you can contact us via [email protected]
KIT 2 - ASSEMBLY MANUAL
CONTROLS
INSTRUCTION TIPS
DESIGN CHANGES
soldering/burning temperature setup
nozzle temperature setup
foam cutting temperature
soldering/burning - on/off
extrusion
retraction
foam cut - on/off

KIT 2
MAIN BODY
double button
+
double button ring Body Lock PTFE Tube Electronics Main_Body
5
insert PTFE tube into the PCB holder
insert Main Body Electronics into the MainBody plastic part
43
insert PTFE tube into the PCB holder
2
insert button into the Main Body
1
attach Double Button ring on the Double Button

6
attach button rings on buttons
5
insert PTFE tube into the assembly
KIT 2
3D PEN ADAPTOR
Insert assembled electronics into plastic body.
4
Slide the Nozzle holder onto the ceramic nozzle
3
Plug extruder motor into the connector
2
Snap 3D_RIGHT_PLA part onto the 3D_RIGHT_ABS
1
double button
+
double button ring
single button
+
single button ring
body locks
+
spring
metal screw
+
PTFE tube
+
nozzle holder
extruder motor
3D pen electronics plastic part
3D_RIGHT_ABS
plastic part
3D_LEFT_ABS
plastic part
3D_RIGHT_PLA
plastic part
3D_LEFT_PLA

11
plug 3D pen adaptor into the main body
10
drive the screw and and secure the whole assembly
9
assemble both halves into one body
8
insert assembled body locks with spring into the body
7
Insert buttons into assembly
KIT 2
3D PEN ADAPTOR

KIT 2
SOLDERING/BURNING ADAPTOR
2x - Burning_Soldering_L
+
2x - Burning_Soldering_R
4x - Body_Lock
+
2x - Spring
3x - Burning tips
1x - Soldering tip
2x metal screw
+
2x Single_Button
+
2x Single_Button_Ring
burning electronics
+
soldering electronics
1
insert electronics into the Burning_Soldering_Left plastic part
2
snap the Single_Button_Ring onto the Single_Button
3
insert assembled button into the body
4
slide assembled body locks with spring into the body
5
assemble both halves into one body
6
drive the screw in and and secure the whole assembly
7
plug the tip into connector and tight it by hand.
8
plug burning/ soldering adaptor into the Main Body

KIT 2
FOAM CUTTING ADAPTOR
Foam_Cutting_L
+
Foam_Cutting_R
2x - Body_Lock
+
Spring
resistance wire
metal screw
+
Single_Button
+
Single_Button_Ring
Foam Cutting Electronics
1
insert electronics into the Foam_Cutting_Left plastic part
2
snap the Single_Button_Ring onto the Single_Button
3
insert assembled button into the body
4
slide assembled body locks with spring into the body
5
assemble both halves into one body
6
drive the screw in and and secure the whole assembly
7
attach resistance wire on foam cutting aluminium frame
8
plug the Foam Cutting adaptor into the Main Body