3M SCP715 Manual

Exhibit H-2
f
Find authenticated court documents without watermarks at docketalarm.com.

Super Close Projection System
SCP715/SCP740/SCP717
Operator’s Guide
Important Note
Before using this product, please read the "Product Safety Guide"
and related manuals to ensure the proper use of this product. After
reading them, store them in a safe place for future reference.
Super Close Projection System
Operator‘s Guide
© 3M 2008. All Rights Reserved
www.3m.comr’meetings 78-6971-1396-3
f
Find authenticated court documents without watermarks at docketalarm.com.

Contact 3M
In the event of missing andfor damaged equipment, or technical questions, the following
information can help in the completion ofthe installation.
Customer Service — 1-800-328-1371 (US)
SCP 700 Series Warranty Statements
Limited Warranty
I The 3M SC P700 Series projector (the "3M Product") is warranted is warranted to be
free from defects in material or manufacture for a period of three (3) years from the
date of purchase or 4,000 hours of usage, whichever occurs first.
0 All other accessories of the 3M Product (those in the applicable modular configura-
tions), excluding the projector lamps. but including the wall mounts, ceiling mounts,
digital annotation sensors, and inputroutput devices are warranted to be free from de-
facts in material or manufacture for a period of one (1) year from the date of purchase.
0 The lamp component of the 3M Product is warranted to be free from defects in mate-
rial and manufacture for a period of for a period of ninety (90) days after the date of
purchase of the 3M Product or 180 hours of lamp usage, whichever occurs first. This
warranty is for parts only and in the case of an approved warranty claim for a lamp,
your exclusive remedy will be for a replacement product shipped to your location.
0 Optional product upgrades and.-‘or accessories that are not sold as part of any modular
configuration are subject to individual warranties.
THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE OF
ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS.
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR ANY INDUSTRY PRACTICE OR CUSTOMOR TRADE
USAGE.
In the event the 3M Product fails to conform to the above stated warranties within the
applicable warranty period, your exclusive remedy shall be, at 3M’s option, to replace or
repair the 3M Product or to refund the purchase price of the 3M Product. All replaced parts
or products become property of 3M. If the product is repaired, 3M will repair the defective
partts} with a new or used part(s). lfthe 3M Product is replaced, 3M will replace the 3M
Product with the same or equivalent model and with a new or refurbished BM Product. In
the case of an approved warranty claim, the replacement 3M Product will carry only the re-
maining term of the original 3M Products warranty period as stated above. . For warranty
service, you must provide proof of the date of the orginal purchase else the manufacturing
code date will be used to establish the start date of the warranty. The following are exclu-
sions to the above listed warranty:
'-.I "um.-~. \|| I-:..-7m. |\..\"“-L'l"|_'Si
f
Find authenticated court documents without watermarks at docketalarm.com.

"-_\l""" "'-'-||"'-."'i in‘--.-u !'l'I'It't'iI~:i H‘-ml-._'Iit I.'|Il|t.' Hi i l'I|llL‘lll‘~
a. This warranty does not cover 3M Product that is modified or damaged through im-
proper storage, misuse, abuse, accident, vandalism, improper installation, neglect.
improper shipping, damage caused by acts of war, disasters such as fire, flood, and
lightning, improper electrical current, software problems. interaction with non-3M prod-
ucts, or service other than by an 3M Authorized Service Provider, neglect or mishan-
dling by any person. Normal wear and tear is not covered under warranty.
b. 3M Product is designed to operate in the typical indoor environment. This warranty
does not cover 3M Product used outside of the following circumstances:
o 100V-240V AC, 5El!60 Hz
o 16° to 29° C (60° to 85° F)
o 10-30% RH {without condensation)
o 0-1828m {O-6000 feet) above sea level
:2. The Air Intake and Exhaust Vent must be clear of obstructions, including any potential
blockage or obstructions caused from a ceiling or other mount. Inadequate air ventila-
tion will cause the 3M Product to malfunction or will cause damage to the 3M Product
which will void the warranty.
d. This warranty does not cover any additional costs including. but not limited to, those
associated with removal, cleaning or installation of the 3M Product, adjustments,
(mechanical or electronic} made to the 3M Product or replacing customer replaceable
parts like lamps and air filters.
e. This warranty covers only normal use of the product. 24-hour—per-day or other exces-
sive continual use causes strain and is not considered normal use.
f. This warranty does not cover consumables (e.g., fuses), other than lamps and only as
set forth below.
g. This warranty is not transferable.
h. 3M is not responsible for warranty service should the 3M label or logo or the rating
label or serial number he removed unless otherwise stated in writing for the purposed
of private labeling for partnership requirements.
i. This warranty does not cover postage, insurance. or shipping costs incurred in pre-
senting your 3M Product for warranty service. Said costs are the customer’s respon-
sibility. If a claimed defect cannot be identified or reproduced in service, the customer
may be held responsible for cost incurred. Should your warranty upgrade include a
“change out" service and the claimed defect cannot be identified or reproduced by the
technician, the customer will be responsible for call out costs.
FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE 3M
PRODUCT MANUAL OR TO USE THE 3M PRODUCT IN ACCORDANCE WITH 3M’S IN-
TENDED USE STATEMENT, WILLVOID ALL WARRANTIES AND LIMITED REMEDIES.
f
Find authenticated court documents without watermarks at docketalarm.com.

l..n|.- in-' l. .I||iu.‘ilI'- 4.'\I"""x|1]'ig_-i_'t lint‘ I'i'u]gi_'l|n|| H_\.x1t-in
EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL, BM
SHALL NOT BE LIABLE FOR ANY INDIRECT. INCIDENTAL. SPECIAL OR CONSEQUEN-
TIAL DAMAGES (INCLUDING. BUT NOT LIMITED TO. LOSS OF PROFITS, REVENUE
OR BUSINESS) RESULTING FROM. OR IN ANY WAY RELATED TO PERFORMANCE.
USE OR INABILITY TO USE ANY OF THE 3M PRODUCT. This limitation applies regard-
less of the legal theory upon which damages are sought.
For warranty support. please call or write your local 3M office or a 3M Authorized Service
Provider to obtain an RMA# {Return Material Authorization Number) before returning the
product. If you are inside the Continental United States ofArnerica, please contact 3M
Customer Service at 800-328-1371 or email [email protected].
What 3M Ifl/ill Do To Correct Problems:
c If your 3M Product requires service. 3M will ask you to bring or send the 3M Product.
securely packaged in its original container or equivalent. along with proof of the date of
original purchase. to your 3M Service Dealer or SM Service Center.
I 3M will. at its option, repair or replace the defective unit without charge for parts or
labor. Return of the 3M Product will be at 3M's expense.
a When warranty service involves the exchange of the 3M Product orof a part. the item
replaced becomes 3M property.
0 The exchanged 3M Product or part may be new or previously refurbished to the 3M
standard of quality. and at 3M's option. the replacement may be another model of like
kind and quality.
I 3M’s liability for replacement of the warranted 3M Product or part will not exceed the
original retail selling price of the 3M Product. Exchange or replacement products or
parts assume the remaining warranty period of the product covered by this limited
warranty. However, each replacement lamp carries the limited 90-day warranty stated
above.
[4■ ' . K4■ ‘rim. \l|l\’ ‘Eli-.'|\':r_'\.L'|\L'\_i
f
Find authenticated court documents without watermarks at docketalarm.com.

The 3M logo. and 3M are trademarks of the 3M Company.
Important Notice
All statements, technical information. and recommendations related to 3M's products are
based on information believed to be reliable. but the accuracy or completeness is not
guaranteed. Before using this product or implementation, you must evaiuate them and de-
termine if they are suitable for your intended application or situation. You assume all risks
and liability associated with such use or implementation. Any statements related to the
product which are not contained In 3M's current publications. or any contrary statements
contained on your purchase order shall have no force or effect unless expressly agreed
upon, in writing. by an authorized officer of 3M.
All rights reserved. No part of this book covered by the copyrights hereon may be repro-
duced or copied in any form or by any means-graphic, electronic, or mechanical. including
photocopying, taping or information storage and retrieval systems-without written permis-
sion of 3M Projection Systems Department.
'.\i "Il|."_ ‘-,|il-:|.~_'|'ri'-.H.‘-1_'|\:_'ri
vxl €XQ■ fwninw f In.-.u |'l'n1tw_".|nl1‘xx.--.I-gill l'.i|wit- nit Hll'.r_'lli‘-—

ii\i ' “ .\iIjn'i' ( '|u.-at’ !‘i'n_|uL't1=-it H_\-xiuni i';:|1l'cnl t'unIi:nl\
Package Overview... . .... . . ... ... ... . . . . . . . ... ..B
Product Overview ` ■ ................................................................ ..9
Main Unit . . . . . . . . . . . . . . . . .. P■■ 0■
Control Panel ■ .... ..10
Connection Ports E■
Remote Control with Mouse Function.___. P,■ ■
.............................................................................. .. 13
Connecting the Projector .................................................................................. ..13
Connect the Computermotebook .. @■■ c■ .. . ■ 13
Connectthe Video ■
Powering On!Ofl‘ the Projector ......................................................... ■|■ .............. ..15
Powering On the Projector,..,......................... ■ ......15
Powering Off the projector ......16
LED Indicator............................. pk■ ......16
Adjusting the Projected Image .......................................................... ..17
Adjusting the Projector Image Height .. ■■
Adjusting the Projector ■■
3M Super Close Projection System SCP715l'SCP71T Adjusting Projected Image
~■
3M Super Close Projection System SCP740 Adjusting Projected Image Size ■■ 19
.............................................................................. .. 20
Control Panel & Remote Control ...................................................................... ..20
On-Screen Display Menus ................................................................................ ..23
How to Operate ........ ..23
Menu
Menu
|nformation............ ......26
Management-U3... ......27
Management-2J3... l■ l■
l■ ......31
`■ ......32
Image-212... ......35
■
............................................................................. ..43
Troubleshooting ................................................................................................ ..43
Replacing the Lamp ... . .... . .... . . ... .... . . . . . . ..47
Compatibility Modes . . . .... . . ... . .... . ... . . . . . . . ... . . ... . .... . . ..48
R5232 Protocol Function List ... . .... . . . . . . . ... . . . . . ... . . . ..49
Regulation 8- Safety notices ............................................................................. ..52
< "~\l '_‘hr.:.\. \i| i{1_::l1t~\ I\‘c'.c:'\cd. |

' ‘I'll:
.i'
'-\.l"” ‘w'.I|\-cl‘! En--.t' l’I'n1|w'iiriia ‘»_\-~1uiii
Precautions
Foiiow ail warnings, precautions and maintenance as
recommended in this user’s guide to maximize the fife of
your unit.
QWARNING
I Do not look into the projector's lens when the iamp is on. The
bright light may hurt your eyes.
I To reduce the risk of injury to the eyes. do not look directly into
the laser light on the remote control and do not point the iaser
light into anyone eyes. This remote control is equipped with a
Class II laser that emits radiation.
I To reduce the risk of fire or electric shock. do not expose this
product to rain or moisture.
0 Please do not open or disassemble the product as this may
cause electric shock.
a When changing the lamp. please allow unit to cool down, and fol-
low all changing instructions.
o Position the power cord and data cable so that they can not be
tripped over.
I Do not remove any screws other than those specified in the lamp
replacement instructions.
0 Disconnect power cord when the projector is not in use, during
lamp replacement and while cleaning.
o Switch power "OFF" and disconnect the plug from electrical outlet
before replacing the iamp. Grasp plug and pull to disconnect.
I Do not attempt to service the projector; other than the lamp car-
tndge there are no user serviceabie parts inside the projector.
= 'iIr.Ir. xlil-I:--Ir. §{t--.t-rx.-z.

3\i"“ ‘*-II|'v.'i" ltm: l]l'l'j\_l_'l:'l'FI "4‘~. '~!t.|l| 5 .~.1:'L' ="\.-iinicc
FK■ ‘I-'_i_-_'||l. lf." '_‘|". \'l|
AWARNING
0 Do not attempt to service the projector other than performing
routine lamp replacement. Service should only be performed by
a 3M authorized service provider. Aside from the projection lamp
assembly, there are no serviceabfe parts inside the unit.
a Contact a 3M authorized service provider for service.
I Do not modify this projector.
is Do not allow water or other liquids to enter the projector.
a Do not operate this projector in wet environments or outdoors.
a Do not use this projector around unsupervised children.
0 Replace power cord if damaged.
0 Contact a 3M authorized service provider if the projector be-
comes damaged.
o Connect this projector into a grounded outlet.
I Use a grounded extension cord with a rating at least equal to that
of the projector.
I Use only the SM brand wall mounting hardware kit if wall mount-
ing is desired.
- Installation of 3M wall kit must only be performed by qualified
personnel.
-Adhere strictly to the proper installation procedure as outlined in
the installation instructions when installing the 3M wall kit.
0 Always operate the unit on a flat. sturdy, and horizontal surface.
0 Before operating, please read owner's manual. Do not remove
screws except lamp cover screws. Do not block venting open-
ings.

'.-\l“‘-' ‘wiipyi ("In-~.l_' l‘m_iculli~li .‘i_\~-.lt:ni
AwARNING
In Lamp replacement caution. Before removing the screws. discon-
nect the power cable. Hot surface inside. Allow 1 hour to cool
before replacing the lamp. Handle with care. Risk of explosion.
See Owner's Manual.
0 Unplug the projector from the electrical outlet and allow the lamp
to cool for 60 minutes before replacing the lamp.
u Wait at least 30 minutes for the lamp assembly to cool before
replacing.
in Always handle the fragile lamp module with care.
0 In the event of a lamp rupture. calla 3M authorized service pro-
vider for repair. Ruptured lamp is not user serviceable.
o Ventilate the area where the lamp rupture occurred. The lamp
operates at high pressure and temperature.
0 Replace the lamp module when the lamp replacement message
appears.
a Never replace the lamp module with a previously used lamp
module.
in Hg: Lamp contains mercury. Don't throw in trash. Dispose ac-
cording to local, state. or federal laws. See www.|amprecycie.org
or call 1-800-328-1371.
0 Wash your hands thoroughly if contact with ruptured lamp debris
has taken place.
a Ventilate the area where the lamp rupture occurs. The lamp oper-
ates at high temperature.
~■ Iliil.‘-.. ‘\|| |':l'_'|I|', l-'.c~-t'l\t'al