3M X90 Parts list manual

1
This manual is only intended to explain Network Functions.
For safety, operations or any other issues, refer to the all user's manual for this
projector.
• Before using the network functions, read the all user's manual
for this projector carefully to ensure your projector is set up correctly.
• After reading, keep the manuals in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Contents
Network Functions .................................................................. 2
Settings ................................................................................... 6
Projector Control ................................................................... 22
Failure & Warning Alerts via E-mail ...................................... 26
Projector Management via SNMP.......................................... 28
Controlling the Projector via Scheduling .............................. 29
e-SHOT(Still Image Transfer) Display ................................... 32
Command Control via the Network....................................... 34

Trademark acknowledgment
• Windows is a registered trademark of Microsoft Corporation.
• Netscape is a registered trademark of Netscape Communications Corporation.
• JavaScript is a registered trademark of Sun Microsystems, Inc.
All other trademarks are the properties of their respective owners.
X90w
Multimedia Projector
Network Functions
© 3M 2007. All Rights Reserved.

2
Network Functions
Network Functions
Conguring and Controlling the Projector via a Web Browser
You can change the settings of or control the projector via a network by using a
web browser from a PC that is connected to the same network.
(4)
Failure & Warning Alerts via E-mail
The projector can automatically send an alert to specied e-mail addresses when
the projector requires maintenance or has encountered an error.
(26)
Projector Management via SNMP
This projector is SNMP (Simple Network Management Protocol) compliant,
allowing you to monitor it from a remote location using SNMP software. In
addition, the projector is able to send failure & warning alerts to a specied PC.
(28)
Controlling the Projector via Scheduling
You can schedule the projector to perform various functions according to the
DATE and TIME.
(29)
Still Image Transfer
The projector can display still images that are transferred via the network.
(32)
Projector Control via RS-232C via the Network
The projector can be controlled using RS-232C commands over a network.
(34)
This projector is equipped with the following network functions.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

3
Network Functions
Before using the network functions…
To use the network functions of this projector, the projector must be congured to
suit your network. Consult with your network administrator before connecting the
projector to your network. Incorrect network conguration of this projector may
cause problems on your network.
Connect to the Gateway (The router/PC that forwards trafc to a destination
outside of the subnet of the transmitting device) from the network terminal on the
projector using a CAT-5 (or greater) cable and congure the following settings.
If using a network with DHCP enabled:
The projector’s network settings can be congured automatically. when [DHCP] on
the network menu is set to [TURN ON]. Please refer to DHCP in network menu. (
Operator's Guide : NETWORK Menu) If a xed / static IP address is required, please
congure your projector according to the steps in the following section.
If using a network system that does not have DHCP enabled or if
using a xed IP address on a network system equipped with DHCP
enabled:
Congure the following settings on the network menu.
(Operator's Guide : NETWORK Menu)
1. [DHCP]: Disable DHCP (Set [DHCP] to [TURN OFF]).
2. [IP ADDRESS]: Enter an appropriate IP address for the projector to connect
to your network.
3. [SUBNET MASK]: Enter an appropriate SUBNETMASK for the projector to
connect to your network.
4. [DEFAULT GATEWAY]: Enter an appropriate Gateway (the router/PC that
forwards trafc to a destination outside of the subnet of the transmitting
device) address for the projector to connect to your network.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

4
Network Functions
Conguring and controlling the projector via a web browser
You can adjust or control the projector via a network from a web browser on a PC
that is connected to the same network.
• Internet Explorer 5.5 or higher or Netscape 6.2 or higher are required.
• If JavaScript is disabled in your web browser conguration, you must enable
JavaScript in order to use the projector web pages properly. See the Help les
for your web browser for details on how to enable JavaScript.
• This projector is SSL (Secure Socket Layer) compliant. Please specify “https://”
when the entering the projector address.
• If projector is disconnected from network approx. 50 seconds, system will
automatically log off. Please Re-log on to continue operations via a web
browser.
• After you logon, a small, blank window will appear behind the main operation
window. Please do not close this small, blank window. If this window is closed,
the system will automatically log off after certain period of time even if an
operation is being performed.
The small, blank window will close when the main operation window is closed.
• The small, blank window may be considered a pop-up and be blocked if you
are using Windows XP Service Pack 2, or using other security software.
If Service Pack 2 blocks the window the following message will appear:
"Pop-up blocked. To see this pop-up or additional options click here..."
Please select "Temporarily Allow Pop-ups" or "Always Allow Pop-ups From This
Site..." to allow the window to open.
• It is recommended that all web browser updates be installed. It is especially
recommended that all users running Internet Explorer on a Microsoft Windows
version prior to Windows XP Service Pack 2 install security update Q832894
(MS04-004) or the web browser interface may not be displayed correctly.
And when using an older version of Internet Explorer, during operations the
browser will log out after 50 seconds.
NOTE
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

5
Network Functions
When conguring or controlling the projector via a web browser, an ID and
password are required. There are two types of IDs, Administrator IDs and User
IDs. The following chart describes the differences between user and administrator
IDs.
Below are the factory default settings for administrator IDs, user IDs and
passwords.
Item Description Administrator ID User ID
Network Information Displays the projector’s current
network conguration settings. √ √
Network Settings Displays and congures network
settings. √N/A
Port Settings Displays and congures
communication port settings. √N/A
Mail Settings Displays and congures e-mail
addressing settings. √N/A
Alert Settings Displays and congures failure &
warning alerts. √N/A
Schedule Settings Displays and congures schedule
settings. √N/A
Date/Time Settings Displays and congures the date and
time settings. √N/A
Security Settings Displays and congures passwords
and other security settings. √N/A
Projector Control Controls the projector. √ √
Projector Status Displays and congures the current
projector status. √ √
Network Restart Restarts the projector’s network
connection. √N/A
Item ID Password
Administrator ID Administrator <blank>
User ID User <blank>
Conguring and controlling the projector via a web browser (Continued)
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

6
Settings
Settings
Refer to the following for conguring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter
[https://192.168.1.10] into the
address bar of the web browser and
the screen in Fig. 1 will be displayed.
2) Enter your ID and password and click
[Logon].
If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.
3) Click the desired operation or conguration item on the main menu located on
the left-hand side of the screen (Fig. 2 or Fig. 3).
Fig. 2 (Logon with administrator ID) Fig. 3 (Logon with user ID)
Fig. 1
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

7
Settings
Network Information
All screen images displayed in this manual are
screens of a logon using an administrator ID.
Any administrator only functions will not be
displayed when using a user ID. Refer to the
descriptions in each table.
Displays the projector’s current network conguration settings.
Item Description
DHCP Displays the DHCP conguration settings.
IP Address Displays the current IP address.
Subnet Mask Displays the Subnet Mask.
Default Gateway Displays the Default Gateway.
MAC Address Displays the MAC address.
Firmware Date Displays the network rmware time stamp. This information is only
displayed when logged on using an administrator ID.
Firmware Version Displays the network rmware version number. This information is
only displayed when logged on using an administrator ID.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

8
Settings
Network Settings
Displays and congures network settings.
Click the [Apply] button to save the settings.
• The new conguration settings are activated after restarting the
network connection. When the conguration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
NOTE
Item Description
IP Conguration Congures network settings.
DHCP ON Enables DHCP.
DHCP OFF Disables DHCP.
IP Address Congures the IP address when DHCP is disabled.
Subnet Mask Congures the Subnet Mask when DHCP is disabled.
Default Gateway Congures the Default Gateway when DHCP is disabled.
Projector Name Congures the Projector name.
SysLocation Congures the location to be referred to when using SNMP.
SysContact Congures the contact information to be referred to when
using SNMP.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

9
Settings
Port Settings
Displays and congures communication port settings.
Click the [Apply] button to save the settings.
• The new conguration settings are activated after restarting the
network connection. The network connection must be restarted when the
conguration settings are changed. The network connection can be restarted
using [Network Restart] on the main menu.dresses.
NOTE
Item Description
Network Control Port1
(Port:23) Congures command control port 1 (Port:23).
Port open Click the [Enable] check box to use port 23.
Authentication Click the [Enable] check box when authentication is required
for this port.
Network Control Port2
(Port:9715) Congures command control port 2 (Port:9715).
Port open Click the [Enable] check box to use port 9715.
Authentication Click the [Enable] check box when authentication is required
for this port.
Image Transfer Port
(Port:9716) Congures the image transfer port (Port:9716).
Port open Click the [Enable] check box to use port 9716.
Authentication Click the [Enable] check box when authentication is required
for this port.
SNMP Port Congures the SNMP port.
Port open Click the [Enable] check box to use SNMP.
Trap address Congures the destination of the SNMP Trap in IP format.
SMTP Port Congures the SMTP port.
Port open Click the [Enable] check box to use the e-mail function.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

10
Settings
Mail Settings
Displays and congures e-mail addressing settings.
Click the [Apply] button to save the settings.
• You can conrm whether the mail settings work correctly using the
[Send Test Mail] button.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
NOTE
Item Description
Send Mail
Click the [Enable] check box to use the e-mail function.
Congure the conditions for sending email under [Alert
Settings].
SMTP Server IP Address Congures the address of the mail server in IP format.
Sender E-mail address
Congures the sender e-mail address.
The length of the sender e-mail address can be up to 255
alphanumeric characters.
Recipient E-mail address
Congures the e-mail address of up to ve recipients. You
can also specify [TO] or [CC] for each address. The length of
the recipient e-mail address can be up to 255 alphanumeric
characters.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

11
Settings
Alert Settings
Displays and congures failure & warning alerts.
Item Description
Cover Error Congures Cover Error alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
Fan Error Congures Fan Error alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e- mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

12
Settings
Alert Settings (Continued)
Item Description
Lamp Error Congures Lamp Error alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
Temp Error Congures Temp Error alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
Air Flow Error Congures Air Flow Error alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

13
Settings
Alert Settings (Continued)
Item Description
Lamp Time Error Congures Lamp Time Error alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
Cool Error Congures Cool Error alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
Filter Error Congures Filter Error alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

14
Settings
Alert Settings (Continued)
Item Description
Other Error Congures Other Error alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
Schedule Execution Error Congures Schedule Execution Error alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
Lamp Time Alarm Congures Lamp Time Alarm alert settings.
Alarm Time Congures the lamp time to alert.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

15
Settings
Alert Settings (Continued)
Item Description
Filter Time Alarm Congures Filter Time Alarm alert settings.
Alarm Time Congures the lter time to alert.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric characters.
“CHANGE THE LAMP” is
displayed
Congures alert settings for when “CHANGE THE LAMP” is
displayed.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric characters.
Cold Start Congures Cold Start alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Authentication Failure Congures Authentication Failure alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Click the [Apply] button to save the settings.
Transition Detector Alarm Congures Transition Detector Alarm alert settings.
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for
this item.
Send Mail Click the [Enable] check box to enable e-mail alerts for this
item.
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
Mail Text Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric characters.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

16
Settings
Schedule Settings
Displays and congures schedule settings.
Item Description
Daily Congures the daily schedule.
Schedule Click the [Enable] check box to enable daily scheduling.
Schedule List Displays the current daily schedule.
Sunday Congures the Sunday schedule.
Schedule Click the [Enable] check box to enable Sunday scheduling.
Schedule List Displays the current Sunday schedule.
Monday Congures the Monday schedule.
Schedule Click the [Enable] check box to enable Monday scheduling.
Schedule List Displays the current Monday schedule.
Tuesday Congures the Tuesday schedule.
Schedule Click the [Enable] check box to enable Tuesday scheduling.
Schedule List Displays the current Tuesday schedule.
Wednesday Congures the Wednesday schedule.
Schedule Click the [Enable] check box to enable Wednesday scheduling.
Schedule List Displays the current Wednesday schedule.
Thursday Congures the Thursday schedule.
Schedule Click the [Enable] check box to enable Thursday scheduling.
Schedule List Displays the current Thursday schedule.
Friday Congures the Friday schedule.
Schedule Click the [Enable] check box to enable Friday scheduling.
Schedule List Displays the current Friday schedule.
Saturday Congures the Saturday schedule.
Schedule Click the [Enable] check box to enable Saturday scheduling.
Schedule List Displays the current Saturday schedule.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

17
Settings
Schedule Setting (Continued)
Item Description
Specic date No1 Congures the specic date (No.1) schedule.
Schedule Click the [Enable] check box to enable specic date (No.1)
scheduling.
Month/Day Congures the Month and date.
Schedule List Displays the current specic date (No.1) schedule.
Specic date No.2 Congures the specic date (No.2) schedule.
Click the [Apply] button to save the settings.
Schedule Click the [Enable] check box to enable specic date (No.2)
scheduling.
Month/Day Congures the Month and date.
Schedule List Displays the current specic date (No.2) schedule.
Specic date No.3 Congures the specic date (No.3) schedule.
Schedule Click the [Enable] check box to enable specic date (No.3)
scheduling.
Month/Day Congures the Month and date.
Schedule List Displays the current specic date (No.3) schedule.
Specic date No.4 Congures the specic date (No.4) schedule.
Schedule Click the [Enable] check box to enable specic date (No.4)
scheduling.
Month/Day Congures the Month and date.
Schedule List Displays the current specic date (No.4) schedule.
Specic date No.5 Congures the specic date (No.5) schedule.
Schedule Click the [Enable] check box to enable specic date (No.5)
scheduling.
Month/Day Set the Month and date.
Schedule List Displays the current specic date (No.5) schedule.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

18
Settings
To add additional functions and events click the [Add] button and set the following
items.
Item Description
Time Congures the time to execute commands.
Command Congures the commands to be executed.
Power Parameter Congures the parameters for power control.
Input Source
Parameter Congures the parameters for input switching.
Display Image
Parameter Congures the parameters for display of transfer image data.
Click the [Register] button to add new commands to the Schedule List.
Click the [Delete] button to delete commands from the Schedule list.
Date/Time Settings
Displays and congures the date and time settings.
Item Description
Current Date Congures the current date in Year/Month/Day format.
Current Time Congures the current time in Hour:Minute:Second format.
Schedule Setting (Continued)
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

19
Settings
Date/Time Settings (Continued)
Click the [Apply] button to save the settings.
Item Description
Daylight Savings Time Click the [ON] check box to enable daylight savings time and
set the following items.
SNTP Server IP Address Congures the SNTP server address in IP format.
Cycle Congures the interval at which to retrieve Date and Time
information from the SNTP server. (hours:minutes).
Start Congures the date and time daylight savings time begins.
Month Congures the month daylight savings time begins (1~12).
Week Congures the week of the month daylight savings time
begins (First, 2, 3, 4, Last).
Day Congures the day of the week daylight savings time begins
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Hour Congures the hour daylight savings time begins (0 ~ 23).
Minute Congures the minute daylight savings time begins (0 ~ 59).
End Congures the date and time daylight savings time ends.
Month Congures the month daylight savings time ends (1 ~ 12).
Week Congures the week of the month daylight savings time ends
(First, 2, 3, 4, Last).
Day Congures the day of the week daylight savings time ends
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Hour Congures the hour daylight savings time ends (0 ~ 23).
Minute Congures the minute daylight savings time ends (0 ~ 59).
Time difference
Congures the time difference (hours:minutes).
Set the same time difference as the one set on your PC. If
unsure, consult your network administrator.
SNTP Click the [ON] check box to retrieve Date and Time
information from the SNTP server and set the following items.
• The new conguration settings are activated after restarting the network connection.
The network connection must be restarted when the conguration settings are changed, The
network connection can be restarted using [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• To enable the SNTP function, the time difference must be set.
• The projector will retrieve DATE and TIME information from the Timeserver
and override time settings when SNTP is enabled.
• The Internal Clock’s time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
NOTE
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.

20
Settings
Security Settings
Item Description
Administrator authority Congures the Administrator ID and Password.
Administrator ID
Congures the Administrator ID.
The length of the text can be up to 32 alphanumeric
characters.
Administrator
Password
Congures the Administrator Password.
The length of the text can be up to 255 alphanumeric
characters.
Re-enter Administrator
Password
Re-enter the above password for verication.
Displays and congures passwords and other security settings.
User authority Congures the User ID and Password.
User ID
Congures the User ID.
The length of the text can be up to 32 alphanumeric
characters.
User Password
Congures the User Password.
The length of the text can be up to 255 alphanumeric
characters.
Re-enter User
Password Used to re-enter the above password for verication.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.