Aaeon AGP-3155 User manual

Rugged Expandable AGP-3155
Touch Panel PC
AGP-3155
Intel® Core™ i7/i5 Processor
Rugged Touch Panel Computer
With 15” TFT LCD &
Two PCI/PCIe expansion slots
AGP-3155 Manual 1st Ed
March 2011

Rugged Expandable AGP-3155
Touch Panel PC
i
Copyright Notice
This document is copyrighted, 2011. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, nor for
any infringements upon the rights of third parties, which may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON, assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Rugged Expandable AGP-3155
Touch Panel PC
ii
Acknowledgments
zAward is a trademark of Award Software International, Inc.
zIBM, PC/AT, PS/2 and VGA are trademarks of International
Business Machines Corporation.
zIntel®and Core™ i7/i5 are trademarks of Intel®Corporation.
zMicrosoft Windows®is a registered trademark of Microsoft
Corporation.
zRTL is a trademark of Realtek Semi-Conductor Co., Ltd.
zESS is a trademark of ESS Technology, Inc.
zUMC is a trademark of United Microelectronics Corporation.
zSMI is a trademark of Silicon Motion, Inc.
zCreative is a trademark of Creative Technology LTD.
All other product names or trademarks are properties of their
respective owners.

Rugged Expandable AGP-3155
Touch Panel PC
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
•1 AGP-3155
•1 Jumper Cap
•2 Easy stand & 4 screws
•12 Panel Mount clips & screws
•1 HDD plate & 4 anti-vibration rubbers & 4 screws
•1 Power Cord (optional)
•1 DVD-ROM for manual (in PDF format) and drivers
If any of these items are missing or damaged, you should contact your
distributor or sales representative immediately.

Rugged Expandable AGP-3155
Touch Panel PC
iv
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation.
Dropping it or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified
service personnel should open the equipment.
14. If any of the following situations arises, get the equipment
checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.

Rugged Expandable AGP-3155
Touch Panel PC
v
d. The equipment does not work well, or you cannot get it to
work according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY
DAMAGE THE EQUIPMENT.
16. External equipment intended for connection to signal input/output
or other connectors, shall comply with relevant UL / IEC standard
(e.g. UL 60950 for IT equipment and UL 2601-1 / IEC 60601
series for medical electrical equipment). In addition, all such
combinations – systems – shall comply with the standard IEC
60601-1-1, Safety requirements for medical electrical systems.
Equipment not complying with UL 2601-1 shall be kept outside
the patient environment, as defined in the standard.
FCC
This device complies with Part 15 FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2) this
device must accept any interference
received including interference that may
cause undesired operation.

Rugged Expandable AGP-3155
Touch Panel PC
vi
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Panel PC/ Workstation
有毒有害物质或元素
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件 ×○○○○○
外部信号
连接器及线材 ×○○○○○
外壳 ×○○○○○
中央处理器
与内存 ×○○○○○
硬盘 ×○○○○○
液晶模块 ×○○○○○
光驱 ×○○○○○
触控模块 ×○○○○○
电源 ×○○○○○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。

Rugged Expandable AGP-3155
Touch Panel PC
vii
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Feature......................................................................1-3
1.3 Specification..............................................................1-4
1.4 Dimension .................................................................1-7
Chapter 2 Hardware Installation
2.1 Safety Precautions....................................................2-2
2.2 Location of Connectors and Jumpers of the Main
Board...............................................................................2-3
2.3 List of Jumpers..........................................................2-5
2.4 List of Connectors .....................................................2-5
2.5 Setting Jumpers ........................................................2-6
2.6 CMOS Setting (CMOS1)...........................................2-7
2.7 Auto PWRBTN Selection (JP1).................................2-7
2.8 CFD Voltage 3.3V/5V Selection (JP2) ......................2-7
2.9 TPM Setting (JP3).....................................................2-7
2.10 COM1 +12V/+5V/RING Selection (JP5) ................. 2-7
2.11 COM2 +12V/+5V/RING Selection (JP6) ................. 2-8
2.12 COM1~2 Port LED Connector (CN8)......................2-8
2.13 COM3~4 Port LED Connector (CN9)......................2-8
2.14 LAN Port LED Connector (CN10) ...........................2-8
2.15 RS-232/422/485 Pin Header (COM2).....................2-9

Rugged Expandable AGP-3155
Touch Panel PC
viii
2.16 RS-232 Pin Header (COM3~4)...............................2-9
2.16 SATA Connector (SATA 1~3) .................................2-9
2.18 SATA Power Connector (PWR1)............................2-9
2.19 Hard Disk Drive Installation.....................................2-10
2.20 DVD-ROM Installation.............................................2-16
2.21 Easy Stand Installation............................................2-18
2.22 Panel Mount Kit Installation.....................................2-19
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization . ................................. 3-2
3.2 AMI BIOS Setup........................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3

Rugged Expandable AGP-3155
Touch Panel PC
Chapter 1 General Information 1-1
General
Chapter
1
Information

Rugged Expandable AGP-3155
Touch Panel PC
Chapter 1 General Information 1-2
1.1 Introduction
AGP-3155 is the series product of the Rugged Expandable Touch
Panel Solution. It adopts Intel®Core™ i7/i5 processor with two
DDR3 800/1066 MHz SODIMM up to 8 GB.
Best performance for multimedia solution
AEON's AGP-3155 also supports Intel®Core™ i7/i5 + QM57
chipset and the LVD/CRT Controller has been integrated in QM57.
In addition, it equips versatile I/O ports, such as two RS-232, one
RS-232/422/485, six USB2.0, one Line-out/MIC-in/Line-in, one
Keyboar/Mouse, and one VGA. Therefore, AGP-3155 can be
broadly implemented in several markets, such as Factory Control
Center, Railway Control Center, and Transportation markets.
Multi-Function Intel®Core™ i7/i5 Platform
AGP-3155 integrates 15” color TFT LCD. Moreover, the modular
design for CPU board is easy for you to replace. With flexible
expansion, you get easy access to solutions ranging from Modem,
Storage, Sound Card, SCSI card, Audio/Video capture card,
Wireless LAN module, to Bluetooth module. Furthermore, you may
choose one Mini Card, two PCI or two PCI-Express slots for
necessary expansions. If you are looking for powerful and robust
Touch Panel Computer, AGP-3155 is an ideal solution for your
applications.

Rugged Expandable AGP-3155
Touch Panel PC
Chapter 1 General Information 1-3
1.2 Feature
z15” XGA (1024 x 768) TFT LCD Display
zIntel®Core™ i7/i5 Processor
zEasy-To-Expand: Two PCI/PCIe Slots
zIP-65 Aluminum Die Cast Front Bezel
zTwo Easy Access Front USB Ports
z15” 250 Nits XGA CCFL Backlight; 15” 800 Nits XGA LED
Backlight
zModular Design For CPU Board

Rugged Expandable AGP-3155
Touch Panel PC
Chapter 1 General Information 1-4
1.3 Specification
System
zProcessor Intel®Core™ i7/i5 Processor
zMemory DDR3 800/1066 MHz SODIMM x 2, up
to 8 GB
zChipset Intel®Core™ i7/i5 + QM57
zLCD / CRT Integrated in QM57
zEthernet 10/100/1000Base-TX, RJ-45 x 2
zI/O Port RS-232 x 2, RS-232/422/485 x 1,
USB2.0 x 6 (2 on front, 4 on rear),
Line-out/MIC-in/Line-in x 1, PS/2 x 1 for
Keyboard/Mouse, VGA x 1
zStorage Disk Drive 3.5” SATA Hard Disk Drive x 2, Slim
DVD-Combo (optional)
zExpansion Slot Mini Card x 1, PCI slot x 2 or PCIe x 2
zOS Support Windows®XP, Windows®7, Linux
Fedora
Mechanical
zConstruction IP-65/ NEMA4 for Aluminum die cast
front bezel & Aluminum chassis

Rugged Expandable AGP-3155
Touch Panel PC
Chapter 1 General Information 1-5
zMounting Panel/ Desktop
zDimension 15.36” x 12.76” x 4.91” (390mm x
324mm x 124.7mm)
zCarton Dimension 24.21”(L) x 20.47”(W) x 12.99” (H)
(615mm x 520mm x 330mm)
zGross Weight 24.2 lb (11 kg)
zNet Weight 20.9 lb (9.5 kg)
Environmental
zOperating
Temperature
32oF ~131oF (0oC~55oC) (Ambient with
airflow)
zStorage Tenoeratyre -4oF ~140oF (-20oC~60oC)
zStorage Humidity 10%~95% @ 40oC, non-condensing
zVibration 1 g rms/ 5~500 Hz/ Random operation
(HDD)
zShock 15 G peak acceleration (11 msec.
duration)
zEMC CE/FCC Class A
Power Supply
zAC input 250W 110/230V AC power

Rugged Expandable AGP-3155
Touch Panel PC
Chapter 1 General Information 1-6
LCD
zDisplay Type 15” Color TFT LCD
zMax. Resolution 1024 x 768
zMax. Colors 16.7 M colors (6/8-bit for R,G,B)
zLuminance HTT: 250, STT: 800
HTT: 170°(H)/ 160°(V)
zViewing Angle
STT: 160°(H)/ 140°(V)
zBack Light MTBF
(Hours)
HTT: 30,000
STT: 60,000
Touch Screen
zType 5-wire resistive
zLight transmission 80%
zLifetime 35 million activations

Rugged Expandable AGP-3155
Touch Panel PC
Chapter 1 General Information 1-7
1.4 Dimension
I/O interface

Rugged Expandable AGP-3155
Touch Panel PC
Chapter2HardwareInstallation2-1
Hardware
Chapter
2
Installation

Rugged Expandable AGP-3155
Touch Panel PC
Chapter 2 Hardware Installation 2-2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

Rugged Expandable AGP-3155
Touch Panel PC
Chapter2HardwareInstallation2-3
2.2 Location of Connectors and Jumpers of the Main Board
Component Side

Rugged Expandable AGP-3155
Touch Panel PC
Chapter 2 Hardware Installation 2-4
Solder Side