Aaeon POP-100 G5 User manual

Point of Promotion POP-100 G5
POP-100 G5
Intel®Atom N270
1.6GHz Processor
Operator Panel PC
With 10.2” 16:9 TFT LCD
POP-100 G5 Manual 1st Ed.
July 2009

Point of Promotion POP-100 G5
i
Copyright Notice
This document is copyrighted, 2009. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Point of Promotion POP-100 G5
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
• Award is a trademark of Award Software International, Inc.
• VIA is a trademark of VIA Technologies, Inc.
• RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
• Intel® and Pentium®are trademarks of Intel®Corporation.
• Microsoft Windows®is a registered trademark of Microsoft
Corp.
• IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
• ESS is a trademark of ESS Technology, Inc.
• UMC is a trademark of United Microelectronics Corporation.
• SMI is a trademark of Silicon Motion, Inc.
• Creative is a trademark of Creative Technology LTD.
All other product names or trademarks are properties of their
respective owners.

Point of Promotion POP-100 G5
iii
Packing List
Before you begin operating your PC, please make sure that the
following materials are enclosed:
• 1 POP-100 G5 Panel PC
• 1 PS/2 Y type keyboard / mouse cable
• 1 CD-ROM for manual (in PDF format)
If any of these items should be missing or damaged, please contact
your distributor or sales representative immediately.

Point of Promotion POP-100 G5
iv
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a firm surface during installation. Dropping
it or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified
service personnel should open the equipment.
14. If any of the following situations arises, get the equipment
checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.

Point of Promotion POP-100 G5
v
d. The equipment does not work well, or you cannot get it
to work according to the user’s manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT INAN ENVIRONMENT
WHERE THE STORAGE TEMPERATURE IS BELOW -20°C
(-4°F) OR ABOVE 60°C (140°F). IT MAY DAMAGE THE
EQUIPMENT.
FCC
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received including
interference that may cause undesired
operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer’s instructions and your local government’s recycling or
disposal directives.

Point of Promotion POP-100 G5
vi
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Panel PC/ Workstation
有毒有害物质或元素
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件 ×○○○○○
外部信号
连接器及线材 ×○○○○○
外壳 ×○○○○○
中央处理器
与内存 ×○○○○○
硬盘 ×○○○○○
液晶模块 ×○○○○○
光驱 ×○○○○○
触控模块 ×○○○○○
电源 ×○○○○○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。

Point of Promotion POP-100 G5
vii
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Specification..............................................................1-3
1.3 Dimension .................................................................1-5
Chapter 2 Hardware Installation
2.1 Open-frame Mounting Installation.............................2-2
2.2 COM 1/2 Connector .................................................2-3
C Chapter 3 Award BIOS set up
3.1 System Test and Initialization ...................................3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3

Point of Promotion POP-100 G5
Chapter 1 General Information 1- 1
General
Chapter
1
Information

Point of Promotion POP-100 G5
Chapter 1 General Information 1- 2
1.1 Introduction
The POP-100 G5 Point of Promotion Panel PC is an Intel Atom
N270 1.6GHz processor computer that is designed to serve as a
Digital signage market. It is a PC-based system with 10.2" color
TFT LCD display, Dual Ethernet controller, multi-COM port
interfaces and an audio controller. With a built-in Compact Flash
socket, the POP-100 G5 is a compact and user friendly
multi-function computer. In addition, its Open-frame design makes it
fitted to a variety of cutout installation in building & public field. In
addition, it can be wall mounted or DIN Rail mounted.
For system integrators, this simple, complete, compact and highly
integrated system let you easily build a point of promotion into your
applications. Common industrial applications include factory
automation systems, precision machinery, and production process
control. It is also suitable for many non-industrial applications,
including vending machine, and car park automation. Our point of
promotion panel pc is a reliable & cost-effective solution to your
daily business.

Point of Promotion POP-100 G5
Chapter 1 General Information 1-3
1.2 Specification
System
 CPU Onboard IntelAtom N270 1.6GHz
Processor
 Memory 512MB, up to 2G DDR II SDRAM
 LCD / CRT Controller Intel 945GSE
 Ethernet Intel 82574L 10/100/1000Base-TX
RJ-45 connector x 2
 I/O Port 2 RS-232 (D-SUB 9 connector),
1 PS/2 (mouse and keyboard port),
2 USB 2.0 ports,
1 Audio Line out
 Storage Disk Drive Type II Compact Flash™ slot
(internal slot);
2.5” Hard Disk Drive Bay
 OS Support Windows XP,XP Embedded
Mechanical
 Construction Open frame
 Front Panel Color SGCC original color
 Mounting Open frame mounting Mount, VESA
100mm holes,
DIN Rail (Optional)
 Dimension 12.52” (W) x 8.58” (H) x 1.98” (D)

Point of Promotion POP-100 G5
Chapter 1 General Information 1- 4
(318mm x 218mm x 50.3mm)
 Gross Weight 6.6 lb (3Kg)
Environmental
 Operating Temperature 32oF~104oF(0oC~40oC);
 Storage Temperature -4oF ~140oF (-20oC ~60oC)
 Operating Humidity 10 to 90%@35oC, non-condensing
 EMC CE/FCC Class A
 Power Supply Input: DC 9~30V
LCD
 Display Type 10.2” Color TFT LCD
 Max. Resolution 1024 x 600
 Max. Colors 262K
 Dot Size 0.2175 mm x 0.2175 mm
 Luminance 400 nits
 Viewing Angle 140o(H) x 110o (V)
Touch Screen
 Type 5-wire, analog resistive
 Light Transmission 80%
 Lifetime 35 million activations
Note: All AAEON's LCD products are manufactured with High precision
technology. However, in all LCD panels there maybe a small number of

Point of Promotion POP-100 G5
Chapter 1 General Information 1-5
defective pixels that do not change color. This is a normal occurrence for
all LCD displays from all manufacturers and should not be noticeable or
objectionable under normal operation. AAEON qualify the LCD panel
following industry standard: total 7 dead pixels on a screen or if there are
3 within 1 inch square area of each other on the display.
1.3 Dimension
Unit: mm

Point of Promotion POP-100 G5
Chapter 2 Quick Installation Guide 2-1
Hardware
Installation
Chapter
2

Point of Promotion POP-100 G5
Chapter 2 Quick Installation Guide 2 - 2
2.1 Open-frame Mounting Installation
The display panel can be mounted into the wall. You will need at
least 4 screws and Follow the steps below:
Step 1: Prepare required screws on the wall as the hole for
mounting on the Bezel of Panel PC
Step 2: Place the panel PC onto the wall
Step 3: Screws the nuts and fix the unit
Note: User can consider putting a glasses or Acrylic panel between
Panel PC and Wall for protection of Screen.

Point of Promotion POP-100 G5
Chapter 2 Quick Installation Guide
2 - 3
2.2 COM 1 / 2 Connector
Pin Signal Pin Signal
1 DCD1 2 RXD1
3 TXD1 4 DTR1
5 GND 6 DSR1
7 RTS1 8 CTS1
9 RI1

Point of Promotion POP-100 G5
Chapter3AwardBIOSSetup3-1
Chapter
Award
3
BIOS Setup

Point of Promotion POP-100 G5
Chapter 3 Award BIOS Setup 3-2
3.1 System Test and Initialization
These routines test and initialize board hardware. If the routines
encounter an error during the tests, you will either hear a few
short beeps or see an error message on the screen. There are
two kinds of errors: fatal and non-fatal. The system can usually
continue the boot up sequence with non-fatal errors. Non-fatal
error messages usually appear on the screen along with the
following instructions:
Press <F1> to RESUME
Write down the message and press the F1 key to continue the
boot up sequence.
System configuration verification
These routines check the current system configuration against
the values stored in the CMOS memory. If they do not match,
the program outputs an error message. You will then need to
run the BIOS setup program to set the configuration information
in memory.
There are three situations in which you will need to change the
CMOS settings:
1. You are starting your system for the first time
2. You have changed the hardware attached to your system
3. The CMOS memory has lost power and the configuration
information has been erased.
The POP-100 CMOS memory has an integral lithium battery
backup for data retention. However, you will need to replace the
complete unit when it finally runs down.

Point of Promotion POP-100 G5
Chapter3AwardBIOSSetup3-3
3.2 Award BIOS Setup
Awards BIOS ROM has a built-in Setup program that allows
users to modify the basic system configuration. This type of
information is stored in battery-backed CMOS RAM so that it
retains the Setup information when the power is turned off.
Entering Setup
Power on the computer and press <Del> immediately. This will
allow you to enter Setup.
Standard CMOS Features
Use this menu for basic system configuration. (Date, time, IDE,
etc.)
Advanced BIOS Features
Use this menu to set the advanced features available on your
system.
Advanced Chipset Features
Use this menu to change the values in the chipset registers and
optimize your system performance.
Integrated Peripherals
Use this menu to specify your settings for integrated
peripherals. (Primary slave, secondary slave, keyboard, mouse
etc.)
Power Management Setup
Use this menu to specify your settings for power management.
(HDD power down, power on by ring, KB wake up, etc.)
PnP/PCI Configurations
This entry appears if your system supports PnP/PCI.

Point of Promotion POP-100 G5
Chapter 3 Award BIOS Setup 3-4
PC Health Status
This menu allows you to set the shutdown temperature for your
system.
Frequency/Voltage Control
Use this menu to specify your settings for auto detect
DIMM/PCI clock and spread spectrum.
Load Fail-Safe Defaults
Use this menu to load the BIOS default values for the
minimal/stable performance for your system to operate.
Load Optimized Defaults
Use this menu to load the BIOS default values that are factory
settings for optimal performance system operations. While
AWARD has designated the custom BIOS to maximize
performance, the factory has the right to change these defaults
to meet their needs.
Set Supervisor/User Password
Use this menu to set Supervisor/User Passwords.
Save and Exit Setup
Save CMOS value changes to CMOS and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit setup.
You can refer to the "AAEON BIOS Item Description.pdf"
file in the CD for the meaning of each setting in this
chapter.