Aaeon AEC-6811A User manual

Embedded Controller AEC-6811
AEC-6811
Fanless Embedded Controller
AMD GeodeTM LX 800 Processor
With Dual 100Base-TX Ethernet,
4 COM, Audio, 4 USB
AEC-6811 Manual 2nd Ed.
November 2009

Embedded Controller AEC-6811
i
Copyright Notice
This document is copyrighted, 2009. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Embedded Controller AEC-6811
ii
Acknowledgments
• Award is a trademark of Award Software International, Inc.
• CompactFlash™is a trademark of the Compact Flash
Association.
• AMD, the AMD Arrow logo and combinations thereof are
trademarks of Advanced Micro Devices, Inc.
• ITE is a trademark of Integrated Technology Express, Inc.
• Microsoft Windows®is a registered trademark of Microsoft
Corp.
• IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
All other product names or trademarks are properties of their
respective owners.

Embedded Controller AEC-6811
iii
Packing List
Before you begin operating your PC, please make sure that the
following materials have been shipped:
 1 AEC-6811 Embedded Controller
 1 Keyboard & mouse cable
 1 Phoenix Power Connector
 2 Wallmount Brackets
 2 RJ-45 to DB-9 Cables
 1 Audio Cable
 1 Screw Package
 1 CD-ROM for manual (in PDF format) and
drivers
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.

Embedded Controller AEC-6811
iv
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a firm surface during installation. Dropping
it or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified
service personnel should open the equipment.
14. If any of the following situations arises, get the equipment
checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.

Embedded Controller AEC-6811
v
d. The equipment does not work well, or you cannot get it
to work according to the user’s manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT INAN ENVIRONMENT
WHERE THE STORAGE TEMPERATURE IS BELOW -20°C
(-4°F) OR ABOVE 60°C (140°F). IT MAY DAMAGE THE
EQUIPMENT.
FCC
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received including
interference that may cause undesired
operation.
Caution:
There is a danger of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local
government’s recycling or disposal directives.

Embedded Controller AEC-6811
vi
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Boxer/ Industrial System
有毒有害物质或元素
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯
醚(PBDE)
印刷电路板
及其电子组件 ×○○○○○
外部信号
连接器及线材 ×○○○○○
外壳 ×○○○○○
中央处理器
与内存 ×○○○○○
硬盘 ×○○○○○
电源 ×○○○○○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、电源为选购品。

Embedded Controller AEC-6811
vii
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-3
1.3 Specifications............................................................1-4
Chapter 2 Hardware Installation
2.1 Dimension .................................................................2-2
2.2 HDD Module Installation ...........................................2-3
2.3 Wallmount Installation...............................................2-9
2.4 Jumper Setting..........................................................2-10
2.5 Clear CMOS Setting..................................................2-11
2.6 COM2 RS-232/422/485 Serial Port Connector.........2-11
2.7 COM1/2/3 RS-232 Serial Port Connector.................2-12
2.8 DIO Pin Definition......................................................2-12
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Software Drivers........................................................4-2
4.2 Necessary to know....................................................4-3
4.3 Installing Driver for AEC-6811A................................4-4
4.4 Installing Driver for AEC-6811B................................4-20

Embedded Controller AEC-6811
viii
Appendix A Programming The Watchdog Timer
A.1 Programming for AEC-6811A................................A-2
A.2 IT8712 Watchdog Timer Initial Program................A-7
A.3 Programming for AEC-6811B..............................A-12
A.4 W83627EHG Watchdog Timer Initial Program....A-16
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 1st MB Memory Address Map ................................B-3
B.3 IRQ Mapping Chart................................................B-4
B.4 DMA Channel Assignments...................................B-4

Embedded Controller AEC-6811
ix
Appendix A Programming The Watchdog Timer
A.1 Programming ........................................................A-2
A.2 ITE8712 Watchdog Timer Initial Program ............A-6

Embedded Controller AEC-6811
Chapter 1 General Information 1- 1
General
Chapter
1
Information

Embedded Controller AEC-6811
Chapter 1 General Information 1-2
1.1 Introduction
The AEC-6811 is an Embedded Control PC, multiple IO ports and
Anti-vibration are the main design features of the AEC-6811. This
allows the AEC-6811 to be installed in a rugged transportation
environment despite high ambient vibration.
In addition to the fanless CPU, the AEC-6811 was use the AMD
LX800 500MHz CPU, features one Mini PCI expansion slots for
devices expansion. ADC power supply is commonly used in most
vehicles and factory equipments. The AEC-6811 can powered
by a DC 9~30V input with low power consumption and high
performance. You can also choose an additional external AC
power adapter for power redundancy purposes. AAEON
provides flexible power choices for customers who choose the
AEC-6811.
Transportation has become part of most people’s life and forms a
necessary part of their lifestyle. From cars to trains to ships and
airplanes, we rely on those tools a lot. The AEC-6811 is
designed to improve transportation control and enhance the
quality of our lives.

Embedded Controller AEC-6811
Chapter 1 General Information 1- 3
1.2 Features
• Fanless Design withAMD GeodeTM LX 800 500MHz
Processor
• 1 Mini PCI Slot for Expansion
• DC 9~30V Input with Phoenix Connector and Optional
External AC Power Adapter
• CompactFlash for Version B
• Optional 2.5” Hard Disk Drive Kit
• Dual 100Base-TX Ethernet with RJ-45 Connectors
• 4 COM / 4 USB / Audio Ports
• Operating Temperature: -5°C ~60°C (23°F~140°F)
• Anti-vibration up to 5 g rms /Anti-shock Up to 50g
• CE / FCC ClassA Certified

Embedded Controller AEC-6811
Chapter 1 General Information 1-4
1.3 Specifications
System
 CPU: AMD GeodeTM LX 800 500MHz
 Memory: DDR SDRAM SODIMM x 1,
Max. 512MB; Installed 512MB.
 Expansion: Mini-PCI x 1
 VGA: D-sub 15 VGA Connector
 Keyboard/Mouse: PS/2 Keyboard & Mouse
 Ethernet: 10/100Base-TX Ethernet RJ-45
connector x 2
 SSD: SATA/IDE interface (Only
version A); IDE interface and
Type II CompactFlash™slot
(Only version B)
 Hard Disk Storage: 2.5” Slim Hard Disk Drive kit on
the Bottom cover
 Serial Port: RS-232 x 3; RS-232/422/485 x 1
 Audio: Mic-in / Line-in / Line-out, by an
extension cable
 USB: USB 2.0 x 4
 Watchdog Timer: Generates a time-out system
reset
 Power Supply: DC Input: 9V DC~30V DC
AC Input: External Power Adapter

Embedded Controller AEC-6811
Chapter 1 General Information 1- 5
(Optional)
 System Control: Power on / off switch x 1;Reset
button x 1
 Indicator: Power LED x 1;
HDD active LED x 1 (for IDE
HDD only)
 Digital I/O: 8 ports
Mechanical and Environmental
 Construction: Aluminum Alloy chassis
 Color: Dark Blue
 Mounting: Wallmount (Default), DIN-Rail
 Dimension: 8.35” (W) x 2.53” (H) x 4.21” (D)
(212.15mm x 64.2mm x 107mm)
 Net Weight: 4.75lb (2.16kg)
 Gross Weight: 8.36lb (3.8kg)
 Operation Temperature:
23°F ~ 140°F (-5°C~60°C)(CFD)
 Operation Humidity: 95%@40°C, non-condensing
 Vibration: 5 g rms / 5~500Hz / random
operation (CompactFlash Disk);
1 g / 5~500Hz / random
operation (w/ Hard Disk Drive)
 Shock: 50g peak acceleration (11
msec. duration); ComoactFlash
 EMC: CE/FCC class A

Embedded Controller AEC-6811
Chapter 1 General Information 1-6
Front Side
Rear Side

Embedded Controller AEC-6811
Chapter 2 Hardware Installation 2-1
Hardware
Installation
Chapter
2

Embedded Controller AEC-6811
Chapter 2 Hardware Installation 2 - 2
2.1 Dimension
AEC-6811-A1
Units:mm
AEC-6811-B1
Units: mm

Embedded Controller AEC-6811
Chapter 2 Hardware Installation 2 - 3
2.2 HDD Module Installation
Step 1: Loosen the screw of the front bezel
Step 2: Open the HDD cover by loosening the screws on the
bottom of the chassis

Embedded Controller AEC-6811
Chapter 2 Hardware Installation 2 - 4
Step 3: Loosen the screw of the rear bezel
Step 4.1: Connect the IDE Cable to the bottom of the chassis as
the illustration below
IDE Cable