Aaeon HSB-800I-A11 User manual

Last Updated: January 7, 2021
HSB-800I-A11
Half-Sized ISA SBC
User’s Manual 1st Ed

Preface II
Half-Sized ISA SBC HSB-800I-A11
Copyright Notice
This document is copyrighted, 2021. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
Half-Sized ISA SBC HSB-800I-A11
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
⚫Microsoft Windows is a registered trademark of Microsoft Corp.
⚫AMD and AMD Geode™ are registered trademarks of Advanced Micro Devices,
Inc.
⚫ITE is a trademark of Integrated Technology Express, Inc.
⚫IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
⚫CompactFlash™ is a registered trademark of the CompactFlash Association
All other product names or trademarks are properties of their respective owners. The
publisher of this document neither assumes nor implies ownership of any trademarks
not herein listed.

Preface IV
Half-Sized ISA SBC HSB-800I-A11
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Description
Quantity
HSB-800I-A11
Half-Sized Board
1
1701260307
Flat Cable.9P/DB9P MALE&25P DB25P FEMALE.10P
2mm&26P 2mm/IDC NO FOLD.30cm.W/BKT
1
1701400453
Cable.40P 2.54mm IDC W/Nose W/Fold.40P 2.54mm
IDC W/Nose W/Fold.45cm.Blue ATA-100
1
1700060192
Cable.6P-6P-6P.19cm.IVORY PS2/KB&Mouse
1
1701340704
Flat Cable.34P.70cm.GRAY for FDD
1
1703030501
Wire.3P 2.5mm Housing.3P 2.5mm Housing.50cm
1
170910020A
USB Cable.USB*2.5P 2.mm
Housing*2.20cm.W/Bracket
1
1709140302
Cable.Phone Jack*3.t0 14P 2.54mm Housing.DB9P(M)
10P 2.0mm IDC.4P 2.54mm Housing.30cm.W/Backet
1
1701200301
Flat Cable.9P DB9P MALE.10P 2.0mm
Pitch*2.30cm.IDC NO FOLD.W/BRACKET
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
Half-Sized ISA SBC HSB-800I-A11
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the product page at AAEON.com for the latest version of this
document.

Preface VI
Half-Sized ISA SBC HSB-800I-A11
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any
static-shielded containers.

Preface VII
Half-Sized ISA SBC HSB-800I-A11
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII
Half-Sized ISA SBC HSB-800I-A11
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

Preface IX
Half-Sized ISA SBC HSB-800I-A11
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
○
○
○
○
○
○
外部信号
连接器及线材
○
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。

Preface X
Half-Sized ISA SBC HSB-800I-A11
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Main Board/ Daughter Board/ Backplane
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
O
O
O
O
O
○
Wires &
Connectors
for External
Connections
O
O
O
O
O
O
O：The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only

Preface XI
Half-Sized ISA SBC HSB-800I-A11
Table of Contents
Chapter 1 - Product Specifications.......................................................................................... 1
1.1 Specifications............................................................................................................ 2
Chapter 2 –Hardware Information ....................................................................................... 4
2.1 Dimensions ............................................................................................................... 5
2.2 Jumpers and Connectors....................................................................................... 6
2.3 List of Jumpers and Switches ................................................................................ 7
2.3.1 CFD Voltage 3.3V/ 5V Selection (JP1)...................................................... 7
2.3.2 Clear CMOS (JP2) ........................................................................................ 7
2.3.3 AT/ATX Power Type Selection (JP3)..........................................................8
2.3.4 LCD Clock and Power Selection (JP4)......................................................8
2.3.5 Inverter Voltage Selection (JP5)................................................................ 8
2.4 List of Connectors....................................................................................................9
2.4.1 Digital I/O (CN1)..........................................................................................10
2.4.2 Fan Connector (CN2)................................................................................. 11
2.4.3 Audio Input/ Output/ CD-in/ MIC (CN3)............................................... 11
2.4.4 LCD Inverter Power Connector (CN4).................................................... 11
2.4.5 TFT LCD Connector (CN5)........................................................................12
2.4.6 +5VSB Power Connector (CN6)...............................................................13
2.4.7 AT Power 5V, 12V Connector (CN7) ........................................................14
2.4.8 LVDS Connector (CN9, 10)........................................................................14
2.4.9 PS/2 Keyboard/Mouse Connector (CN11) .............................................15
2.4.10 Internal Keyboard Connector (CN12) .....................................................15
2.4.11 RS-232 Serial Port Header (COM1/ COM3/ COM4) ...........................16
2.4.12 RS-232/422/485 Serial Port Header (COM2) .......................................16
2.4.13 Front Panel Connector 1 (FP1) ..................................................................16
2.4.14 Front Panel Connector 2 (FP2).................................................................17

Preface XII
Half-Sized ISA SBC HSB-800I-A11
2.4.15 IrDA Connector (IR1) ..................................................................................17
2.4.16 LPT Port Connector (LPT1)........................................................................17
2.4.17 USB2.0 Header (USB1/ USB2/ USB3) ......................................................18
2.5 Function Block Diagram........................................................................................19
Chapter 3 - Award BIOS Setup ............................................................................................ 20
3.1 System Test and Initialization ...............................................................................21
3.2 Award BIOS Setup.................................................................................................22
3.3 Standard CMOS Features ....................................................................................24
3.4 Advanced BIOS Features .....................................................................................27
3.5 Advanced Chipset Features.................................................................................33
3.6 Integrated Peripherals ..........................................................................................36
3.7 Power Management Setup..................................................................................40
3.8 PnP/PCI Configurations........................................................................................43
3.9 PC Health Status....................................................................................................45
3.10 Frequency/Voltage Control .................................................................................47
Chapter 4 –Drivers Installation............................................................................................ 48
4.1 Drivers Download and Installation.....................................................................49
Appendix A - Watchdog Timer............................................................................................ 50
A.1 Programming the Watchdog Timer ...................................................................51
A.2 Watchdog Timer Initial Program........................................................................55
Appendix B - I/O Information .............................................................................................. 60
B.1 I/O Address Map ....................................................................................................61
B.2 Memory Address Map .........................................................................................62
B.3 IRQ Mapping Chart...............................................................................................63
B.4 DMA Channel Assignments ................................................................................63

Half-Sized ISA SBC HSB-800I-A11
Chapter 1
Chapter 1 - Product Specifications

Chapter 1 –Product Specifications 2
Half-Sized ISA SBC HSB-800I-A11
1.1 Specifications
System
Form Factor
PICMG 1.0 Half-Size Pure ISA CPU Card
Bus Interface
ISA
CPU
AMD Geode™ LX 800
Memory Type
Onboard 128 MB DDR 400
Chipset
AMD Geode™ CS 5536
BIOS
Award Plug & Play FWH BIOS –8MB ROM
Wake on LAN
No
Watchdog Timer
255 Levels
Power Requirement
ATX 2.1
Power Consumption (Typical)
AMD LX800, DDR400 128MB 0.19A at +12V,
1.51A at +5V, 9.83W
Power Supply Type
+5V, +12V operation, AT mode
Dimensions (L x W)
7.3" x 4.8" (185mm x 122mm)
Operating Temperature
32°F ~ 140°F (0°C ~ 60°C)
Storage Temperature
-40°F ~ 176°F (-40°C ~ 80°C)
Operating Humidity
0% ~ 90% relative humidity, non-condensing
MTBF (Hours)
85,000
Certification
CE/FCC, Class A

Chapter 1 –Product Specifications 3
Half-Sized ISA SBC HSB-800I-A11
Display
VGA/LCD Controller
AMD Geode™ LX 800
Video Output
1600 x 1200@32bpp at 100 MHz for VGA
1600 x 1200@24bpp for LCD
Backlight Inverter Supply
5V, 12V
I/O
Ethernet
10/100 Mbps LAN x1
or 10/100/1000 Mbps LAN x1 (optional)
Audio
AC97 Codec
USB Port
USB2.0 x 4
Serial Port
COM x 4 (Internal Pin Header x 4)
COM1, COM3, COM4: RS-232
COM2: RS-232/422/485
Parallel Port
1 (Support SPP/EPP/ECP mode)
HDD Interface
IDE x 1
FDD Interface
Standard FDD port x 1, support up to 1 floppy
device
SSD
CompactFlash™ Type II x 1
Expansion Slot
ISA, PC/104
DIO
8-bit Programmable (4-in/4-out)
TPM
—

Half-Sized ISA SBC HSB-800I-A11
Chapter 2
Chapter 2 –Hardware Information

Chapter 2 –Hardware Information 5
Half-Sized ISA SBC HSB-800I-A11
2.1 Dimensions
185.00
122.00
15.20 8.60

Chapter 2 –Hardware Information 6
Half-Sized ISA SBC HSB-800I-A11
2.2 Jumpers and Connectors
Component Side
Solder Side

Chapter 2 –Hardware Information 7
Half-Sized ISA SBC HSB-800I-A11
2.3 List of Jumpers and Switches
Please refer to the table below for all of the board’s jumpers that you can configure for
your application
Label
Function
JP1
CFD Voltage 3.3V/ 5V Selection
JP2
Clear CMOS
JP3
AT/ATX Power Type Selection
JP4
LCD Clock and Power Selection
JP5
Inverter Voltage Selection
2.3.1 CFD Voltage 3.3V/ 5V Selection (JP1)
3.3V (Default)
5V
2.3.2 Clear CMOS (JP2)
Normal (Default)
Clear CMOS
1 2 3
1 2 3
1 2 3
1 2 3

Chapter 2 –Hardware Information 8
Half-Sized ISA SBC HSB-800I-A11
2.3.3 AT/ATX Power Type Selection (JP3)
Setting
Function
1-2 Closed
ATX Power Supply (Default)
1-2 Open
AT Power Supply
Note: Only AT Function without Backplanes.
2.3.4 LCD Clock and Power Selection (JP4)
LCD Clock Selection
Normal (Default)
Inverse
LCD Power Selection
+5Vlcd
+3Vlcd (Default)
Note: To prevent damage to your system, do not use any other configuration for JP4
than those shown above.
2.3.5 Inverter Voltage Selection (JP5)
+12V
+5V (Default)
1 2 3
1 2 3