Aastra 6730I Setup guide

1© 2009 Aastra Telecom
6730i and 6731i Headset
Setup and Configuration
Your Connection to the World

2© 2009 Aastra Telecom
Contents
Connecting a headset with an amplifier
Connecting a headset without an amplifier
Headset configuration using the Phone UI
Making and Receiving Calls using the Headset
Recommended Headset List

3© 2009 Aastra Telecom
6730i/6731i – Headset Connection with Amplifier
»Unplug the handset cord from the RJ9 jack on the bottom of the phone
and plug it into the handset jack on the amplifier.
»Plug the telephone cord from the amplifier into the RJ9 jack on the
bottom of the phone.
»Connect the headset to the headset port on the amplifier.
Connect to RJ9 handset jack
RJ9 handset jack

4© 2009 Aastra Telecom
6730i/6731i – Headset Connection without an Amplifier
»Unplug the handset cord from the RJ9 jack on the bottom of the phone.
–NOTE: If setup this way the handset will no longer be connected so it can’t
be used.
– The speakerphone still remains fully useable.
»Plug the headset cord into the RJ9 jack on the bottom of the phone.
Connect to RJ9 handset jack
RJ9 handset jack

5© 2009 Aastra Telecom
6730i/6731i – Headset Configuration using the Phone UI
»Press the “Options” key on the phone and toggle down to.
–Preferences
–Set Audio
–Audio Mode
»Once in “Audio Mode” select either;
–Headset/Speaker
–Speaker/Headset

6© 2009 Aastra Telecom
6730i/6731i – Making and Receiving Calls using the Headset
»Making and Receiving Calls Using a Headset;
– Press the Speaker key to obtain a dial tone or to
answer an incoming call. Depending on the audio mode
selected from the options menu, a dial tone or an
incoming call is received on either the headset or the
hands free speakerphone.
– Press the Goodbye key to end the call.

7© 2009 Aastra Telecom
6730i/6731i– Recommended Headset Model List
»The following is a list of recommended Headset Models;
–GN Netcom
2110ST
2120NC
2127
9120
9120NC
GN9350
–Plantronics
H251N
HW251
P251-U10P
CS70N
510SL
–Sennheiser
SH330