ABB WBCA Series User manual

Installation steps
1Mount the WBCA adapter on the wall (4 screws).
2Mount the WFU filter on the WBCA adapter (4 screws).
3Connect the cable of the WBCA adapter to the L1/L2/L3 of the WFU filter. (Cable included)
4Connect the mains input to the L1/L2/L3/PE of the WBCA adapter.
1
12
2
3
11
22
4
Purpose
The WBCA bottom connection adapter enables supply connection
from the bottom side of the WFU regen filter module mounted onto
it. Check the table on the right for the right adapter type.
Adapter type Filter types
WBCA-01 WFU-01, WFU-02
WBCA-11 WFU-11
WBCA-21 WFU-21, WFU-22
ABB Drives
Quick installation guide
WBCA-xx bottom connection adapter

WBCA-01
3AUA0000070283
3AUA0000070789
WBCA-11 WBCA-21
3AUA0000070791
Weight 8 kg / 17.5 lbs
Weight with WFU-21 53 kg / 116.5 lbs
Weight with WFU-22 59.5 kg / 131 lbs
Depth with WFU-2x 354 mm / 13.9 in
Weight 6.5 kg / 14.5 lbs
Weight with WFU-11 40.5 kg / 89.5 lbs
Depth with WFU-11 310 mm / 12.2 in
Weight 2.5 kg / 5.5 lbs
Weight with WFU-01 13.5 kg / 30 lbs
Weight with WFU-02 16.5 kg / 36 lbs
Depth with WFU-0x 253 mm / 10.0 in
Dimensions and weight
ABB Oy
Drives
P.O. Box 184
FI-00381 HELSINKI
FINLAND
Telephone [phone]
Fax [phone]
www.abb.com/drives
ABB Inc.
Automation Technologies
Drives & Motors
16250 West Glendale Drive
New Berlin, WI 53151
USA
Telephone [phone]
1-800-HELP-365
Fax [phone]
www.abb.com/drives
ABB Beijing Drive Systems Co. Ltd.
No. 1, Block D, A-10 Jiuxianqiao Beilu
Chaoyang District
Beijing, P.R. China, 100015
Telephone [phone]
Fax [phone]
www.abb.com/drives
3AUA0000072562 Rev A EN 2010-02-10