ABB ACS880-01 Series User manual

ABB single drives
Installation guide
ACS880-01 +H358 UK gland plate
Frames R6 to R9
ACS880-01 +H358 IG.book Page 1 Tuesday, February 9, 2016 3:52 PM

List of related manuals
You can find manuals and other product documents in PDF format on the Internet. See section Document
library on the Internet on the inside of the back cover. For manuals not available in the Document library,
contact your local ABB representative.
The code below opens an online listing of the manuals applicable to this product.
Drive hardware manuals and guides Code (English)
ACS880-01 hardware manual 3AUA0000078093
ACS880-01 +H358 UK gland plate installation guide for
frames R6 to R9
ACS880-01 +N7502 drives for SynRM motors supplement 3AXD50000029482
ACS880-01 quick installation guide for frames R1 to R3 3AUA0000085966
ACS880-01 quick installation guide for frames R4 and R5 3AUA0000099663
ACS880-01 quick installation guide for frames R6 to R9 3AUA0000099689
ACS880-01 +P940/+P944 drives for cabinet installation
supplement
3AUA0000145446
ACS880-01 assembly drawings for cable entry boxes of IP21
frames R5 to R9
3AUA0000119627
ACS-AP-x assistant control panels user’s manual 3AUA0000085685
ACS880-01/04 +C132 marine type-approved drives
supplement
3AXD50000010521
Drive firmware manuals and guides
ACS880 primary control program firmware manual 3AUA0000085967
Quick start-up guide for ACS880 drives with primary control
program
3AUA0000098062
Option manuals and quides
Common mode filter kit for ACS880-01 drives (frame R6,
option +E208) installation guide
3AXD50000015178
Common mode filter kit for ACS880-01 drives (frame R7,
option +E208) installation guide
3AXD50000015179
Common mode filter kit for ACS880-01 drives (frame R8,
option +E208) installation guide
3AXD50000015180
Common mode filter kit for ACS880-01 drives (frame R9,
option +E208) installation guide
3AXD50000015201
Vibration dampers for ACS880-01 drives (frames R4 and R5,
option +C131) installation guide
3AXD50000010497
Vibration dampers for ACS880-01 drives (frames R6 to R9,
option +C131) installation guide
3AXD50000013389
Manuals and quick guides for I/O extension modules,
fieldbus adapters, etc.
ACS880-01 manuals
ACS880-01 +H358 IG.book Page 2 Tuesday, February 9, 2016 3:52 PM

Installation guide
ACS880-01 +H358 UK gland plate
Frames R6 to R9
3AXD50000034735 Rev A
EN
EFFECTIVE: 2016-02-05
2016 ABB Oy. All Rights Reserved.
Table of contents
ACS880-01 +H358 IG.book Page 3 Tuesday, February 9, 2016 3:52 PM

ACS880-01 +H358 IG.book Page 4 Tuesday, February 9, 2016 3:52 PM

Table of contents 1
Table of contents
List of related manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1. ACS880-01 installation with option +H358 UK gland plate
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Introduction to the guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Target audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Contents of the guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Related manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Unpacking the drive package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Product and service inquiries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Product training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Providing feedback on ABB Drives manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Document library on the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ACS880-01 +H358 IG.book Page 1 Tuesday, February 9, 2016 3:52 PM

2 Table of contents
ACS880-01 +H358 IG.book Page 2 Tuesday, February 9, 2016 3:52 PM

ACS880-01 installation with option +H358 UK gland plate 3
ACS880-01 installation with
option +H358 UK gland plate
Safety instructions
Obey all safety instructions of the drive. Read the safety instructions before you
install, start up, or use the drive. See ACS880-01 hardware manual
(3AUA0000078093 [English]).
Introduction to the guide
Applicability
This guide is applicable to ACS880-01 installations with option +H358 UK gland plate
for frames R6 to R9 and degree of protection of IP21. The guide is a supplement to
ACS880-01 hardware manual (3AUA0000078093 [English]).
Target audience
This supplement is intended for people who plan the installation, install, start up, use
and service the drive. Read the supplement before you do work on the drive. You are
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
Contents of the guide
This guide contains installation instructions on
• how to install glands to the UK gland plate
• how to install the gland plate to the drive cable box
• how to install the power cables
• how to install the cable box onto the wall
• how to install the drive onto the cable box on the wall.
For other instructions, see the drive hardware manual.
Related manuals
See List of related manuals on the inside of the front cover.
ACS880-01 +H358 IG.book Page 3 Tuesday, February 9, 2016 3:52 PM

4 ACS880-01 installation with option +H358 UK gland plate
Unpacking the drive package
Open the drive package and the cable box package.
Remove the UK gland plate from the drive package.
Note: The UK gland plate is located in the cardboard package of the drive (not in the
cable box package).
Open the cable box package.
Installation procedure
1. Install the power cable clamp shelf to the cable box frame.
ACS880-01 +H358 IG.book Page 4 Tuesday, February 9, 2016 3:52 PM

ACS880-01 installation with option +H358 UK gland plate 5
2. Prepare to make holes in the UK gland plate for the glands where you will make
the 360-degree grounding for the power and control cables. Lay out the SWA
glands onto the gland plate so that the earth straps have space, Then, make the
holes in the plate at a separate location away from the drive to prevent swarf from
entering the drive.
ACS880-01 +H358 IG.book Page 5 Tuesday, February 9, 2016 3:52 PM

6 ACS880-01 installation with option +H358 UK gland plate
3. Install the SWA glands to the UK gland plate.
4. Install the control cable shelves (for mechanical support) to the UK gland plate.
ACS880-01 +H358 IG.book Page 6 Tuesday, February 9, 2016 3:52 PM