Abilia MEMO Timer User manual

Use MEMO Timer
MEMO Timer counts down the selected time interval by means of
illuminated dots in a time pillar. When all dots have gone black, time
is up and the alarm will sound.
MEMO Timer is a visual timer that is intended for people who need
support in understanding the length and passage of time. It is water
proof and made for indoor as well as outdoor use. The estimated
lifetime for this product is 5 years. MEMO Timer is durable and can
withstand being dropped during normal use.
About MEMO Timer
Volume -
Volume +
Time pillar
Time buttons
with light
indicators
Light sensor
Strap attachment
The time buttons on the different
models correspond to different
timer intervals in minutes.
Time
button
MEMO Timer
8 20 60 80
2 5 15 20
4 10 30 40
6 15 45 60
8 20 60 80
The light sensor adapts the brightness of the dots to the
surrounding light. By using the provided straps, MEMO Timer can
be carried around the neck or hung, for example, on a hook or in the
shower.
WARNING: Only use the provided straps with security
buckle to avoid choking and other injuries.
Get started with MEMO Timer
Fit the selected strap if desired.
Fit the batteries according to step 1-7:
Always make sure that the seal of the battery lid is undamaged and
free from debris before the lid is put back in place. Instruct the user
on how to use the product in a safe way.
Maintenance and cleaning
When it is time to change the batteries, there will be an audible
signal every hour. See Get started with MEMO Timer for how to
change the batteries.
Clean the product with warm water and soap, using a soft cloth.
MEMO Timer
Art. nr: 500150 500155 500160 500165
EN 6.0
User manual
500150 500155 500160 500165_User manual_MEMO Timer_EN November 2022
Abilia AB, Råsundavägen 6, 169 67 Solna, Sweden
Phone [phone] | [email protected] | www.abilia.com

Functions and settings
NOTE: You can only change the settings when there is no active
timer.
= Simultaneously push and hold down the indicated time buttons.
The default settings are indicated in bold italic.
Function Buttons Information
Start timer
Press and release
the time button that
corresponds to the
requested time
interval.
The corresponding number of
dots light up.
The indicator on the selected
button lights up (if setting =
’Button lights on’).
When time is out, the alarm
sets off with a flashing time
pillar and with signal and
vibration according to
settings.
Stop alarm Press and release
any button. The alarm is stopped.
Cancel
countdown + 2 sec The countdown is interrupted.
Adjust
alarm
volume
Press and release
Volume +/- to
increase and
decrease the alarm
volume.
Volume in five steps. 1=silent,
5=max (default setting=3).
A sample signal sounds at
each step.
A vibration announces step 1
and step 5.
The settings on this page cannot be changed when a timer is
ongoing.
Setting Buttons Information
Change
alarm
signal
+
2 sec
Use Volume
+/- to change.
A sample
signal sounds
at each step.
Alarm
1
Alarm
2
Alarm
3
Vibration +
2 sec
Use Volume
+/- to change. Off On
On in
silent
mode
Button
lights
+
2 sec
Use Volume
+/- to change. Off On
Max
brightness
+
2 sec
Brightness in five steps. 1=min, 5=max
(default setting = 3).
Use Volume +/- to change. The set
brightness is shown at each step.
Leave
setting
mode
+Illuminated dots flash 3 times.
Alternatively, wait for 10 seconds.
Keylock
+
( , , )
See info*
Locked = Time pillar flashes once. Only
”start timer” and ”stop alarm” possible.
Unlocked = Time pillar flashes twice.
Reset
+ +
+
2 sec
Reset to default settings.
* Push and hold down the blue button while sequentially pushing
and releasing the green, yellow and red buttons.
What's in the box
l1 x MEMO Timer
l1 x Neck strap
l1 x Short strap
l2 x AA batteries 1,5 V
lUser manual (this document)
Product specifications
Dimensions H x W x D: 107 x 46 x 25 mm
Weight: 0.12 kg
Battery: 2 x AA 1,5 V
Alarm volume: max 80 dB (1 meter)
IP code: IP67
Temperature range: -10°C to +40°C
Storage and disposal
Remove the batteries before storing the product for a long period.
The product contains electrical components that must
be recycled. Dispose the product at an applicable
disposal location.
Conformance with requirements for medical devices
MEMO Timer is marketed as a technical aid for people with
disabilities. It complies with all necessary requirements, regulations
and directives for medical devices.
Important information
WARNING: Read the following warning instructions before
you use the product.
lBefore you use the product, read and understand the contents
of this user manual.
lOnly use the provided straps with security buckle to avoid
choking and other injuries.
Serious incidents
If a serious incident related to the product occurs, report this to the
manufacturer and the competent authority of your country. A
serious incident directly or indirectly led, might have led or might
lead to the death of a patient, user or other person; the temporary or
permanent serious deterioration of a patient's, user's or other
person's state of health; or a serious public health threat.
Product liability
The product is developed and risk-assessed according to ISO
14971 and EN 12182. The manual and the technical specifications
are made according to the safety assessments in the risk analysis.
Always consider the safety when using the product. Abilia AB does
not take responsibility for any consequences following incorrect use
or installation of the product. Any form of damage or tampering with
the product invalidates the warranty and disclaims the
manufacturer's liability. The estimated life of the product applies
when used in accordance with its intended use and maintenance
instructions.
For more information about the product and the latest version of this
document, go to www.abilia.com/en.