ABSCO SHEDS A15151FKFD User manual

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 1
DOWNLOAD
OUR APP FOR
ASSEMBLY
VIDEOS
PLEASE LEAVE A REVIEW
Tell us about your experience!
Visit www.abscosheds.com.au/review
AU: 1800 029 701
N Z: 0800 466 444
[email protected]
www.abscosheds.com.au
1620mm
1620mm
CONCRETE SLAB
10mm
50mm
WHEN LAYING YOUR CONCRETE
SLAB, CHAMFER THE 50mm EDGES
DOWNWARDS BY 10mm.
50mm
THIS WILL ENSURE THAT
CLEAR FROM YOUR SHED
WATER RUN OFF IS KEPT

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 2
3mm drill bit 10mm drill bits metal & masonry
GENERAL INSTRUCTIONS
• Before commencing any assembly, read through these instructions in detail to gain a thorough
understanding of assembly methods and associated details.
• Unpack the carton and carefully identify and check off all the parts against the parts described
and illustrated on "COMPONENTS PACKING LIST" pages.
SITE PREPARATION
• The site for the shed must be level. An uneven surface may result in misalignment of parts.
• The shed shall be erected on top of a reinforced concrete slab and anchored down appropriately
illustrated on “FINAL CONSTRUCTION” page.
TOOLS REQUIRED
SAFETY NOTES
• Some parts may have sharp edges. It is advisable to wear gloves when handling these items and
safety glasses if drilling holes. Sensible shoes are highly recommended.
• Do not erect your shed in windy conditions.
• Ensure that the shed is securely anchored to a solid foundation immediately after construction is
completed.
• It is highly recommended to erect the shed with two or more people.
• Do not sit, stand or walk on the roof of your shed.
RECOMMENDED

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 3
COMPONENT PACKING LIST
Check off all components.
SHEETING
QTY COMPONENT
DESCRIPTION
PART
No. CHK QTY COMPONENT DESCRIPTION
PART
No. CHK
1STEEL SHEET
1785 x 773mm 30A 1 STEEL SHEET 1785 x 773mm 30E
1STEEL SHEET
1785 x 773mm 30G 1 STEEL SHEET 1725 x 711mm 37A
2STEEL SHEET
1592 x 773mm 43A 4 STEEL SHEET 600 x 773mm 31D
4MESH SHEET
1195 x 705mm MESH20
INSTRUCTIONS AND FITTINGS PACKET
1DOOR PLATE 12A 1
8G x 3/8” SELF
TAPPING SCREW
PACK QTY 220
FAST001
63mm POP RIVET FAST009 1INSTRUCTION
MANUAL IM
1PADBOLT
115mm LONG FAST006 1PADBOLT HASP FAST007
6
3/16 x 1/2”
CSK SCREW
& NUT
FAST004
FAST005 1PHILLIPS HD
DRIVER BIT FAST038
13mm
DRILL BIT DRILL 15 8G x 20mm SELF TAPPING SCREW FAST013
HUNGRY CHOOKS
1FEEDER
KIT
HCFEEDER
KIT 1DRINKER
KIT
HCDRINKER
KIT
Nominal sheet widths are shown. +/- 2mm is within tolerance.
Nominal sheet widths are shown. +/- 2mm is within tolerance.

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 4
COMPONENT PACKING LIST
CHANNEL PACK
QTY COMPONENT
DESCRIPTION
PART
No. CHK QTY COMPONENT DESCRIPTION
PART
No. CHK
3CHANNEL
1785mm
CHANNEL
1513mm 81F
1CHANNEL
1513mm
CHANNEL
1488mm 53T
2CHANNEL
1498mm
CHANNEL
1498mm 151
8CHANNEL
712mm
CHANNEL
1513mm 81E
2CHANNEL
712mm
CHANNEL
1725mm 58B
1CHANNEL
1725mm
CHANNEL
720mm 54G
1JAMB
1785mm
JAMB
1204mm 70E
1JAMB
1785mm
JAMB
1080mm 91E
7JAMB
1785mm
JAMB
mm 91D
2LIP TRIM
mm
Check off all components.
1597
720
80L 1
53C
150
181
58M
58A
89A
89B
70D
88A
2
2
2
1
1
1
1
2

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 5
SNAPTiTE ASSEMBLY GUIDE
The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for
tools and fasteners.
To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet.
Each perimeter channel must finish flush with the edges of the sheets. Simply tap the channel along
the sheets until each end is neatly flush. If you need to remove channels from the panels, slide it off
from the side.
Channel locks the shed panel into
position without the need for screws!
FASTENING SYMBOLS
Secure channel to sheeting by SNAPTiTE
fastening method.
Join components together with one
screw at this location only, as some
channels have extra holes that are not
required for this model of shed.
Do not join components together at
this location yet, as the screws may
obstruct further assembly of the other
components.
Join components together by pre-drill-
ing the holes first. Use one component as
template to mark where the holes are and
drill with a 3mm drill bit.
3mm pop rivet
4mm nut and bolt set.
D
SNAP
T TE
i

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 6
ROOF AND WALL OVERVIEW
81E
88A
88A
81E
43A
43A
Door and mesh panels not shown for illustrative purposes.
70E
89B
150
151
151
150
89A
91D
53T
31D
54G
80L
81F
53C
80L
80L
181
70D
70D
181
181
181
31D
31D
31D
30G
30A 30E
70D
181
181
181
70D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 7
ROOF PANEL ASSEMBLY
FAST001 x8
FAST001 x4
1x required
81E
81E
43A
43A
88A
88A
SNAP
T TE
i
SNAP
T TE
i
88A
81E

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 8
DOOR PANEL ASSEMBLY
1x required
58A 58B
12A
37A
58M
SNAP
T TE
i
SNAP
T TE
i
58M
Narrow pan of sheet
to this side
20mm
Side channels of door
are to be orientated
opposite to top and
bottom channels.
Side channels are
positioned behind top
and bottom channel.
15mm
20mm flange
15mm flange
FAST006
FAST001 x12
FAST001 x4
D
D
D
D
D
D
D
D
D
D
D
D
D
D
Position 12A
midway along the
door.

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 9
91E
91E
37A
Using the jambs as templates
drill 3mm holes into the
sheet and secure with screws
from the outside of the
sheet.
Turn over the panel and fit
braces.
FAST001 x14
D
D
D D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 10
LEFT SIDE PANEL
1x required
1.
3.
2.
150
151
Prepare one
short sheet
FAST001 x7
30
15
SNAP
T TE
i
181
31D
Notch out both bottom corners as
shown using tinsnips.
89A
89B
70E
70D
80L
80L
150
89B
80L
89A
80L
70D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 11
LEFT SIDE PANEL
4. 5.
SNAP
T TE
i
54G
91D
181
31D
NOTE: 31D sheet is positioned
behind jamb 89B
INSIDE VIEW

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 12
DOOR PANEL ASSEMBLY
Lay the LEFT SIDE PANEL
face up and lay the DOOR
PANEL down in the open
position on top as shown.
Using three rivets per hinge,
FAST009, secure the door to
the frame.
NOTE: Run the 3mm drill bit
through the punched holes
in the jamb before riveting
the hinge on.
FAST009 x6
D
D
D
D
D
D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 13
RIGHT SIDE PANEL
1x required
80L
70D
151
70D
150
1.
70D
151
80L
70D
30E
31D 30E
150
151
70D
70D
80L
181

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 14
RIGHT SIDE PANEL
3.
SNAP
T TE
i
181
31D
FAST001 x2
4.
D
D
INSIDE VIEW
FAST001 x10
2.
Prepare a short
sheet
30
15
SNAP
T TE
i
181
31D
Notch out both bottom corners as
shown using tinsnips.

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 15
REAR PANEL ASSEMBLY
1x required
30A
30G
53C
81F
FAST001 x2
SNAP
T TE
i
SNAP
T TE
i

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 16
FRONT PANEL
1.
3.
2.
53T
53T
70D
70D
53T
Prepare two
short sheets
70D
FAST001 x7
30
15
SNAP
T TE
i
181
31D
Notch out both bottom corners as
shown using tinsnips.

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 17
SNAP
T TE
i
SNAP
T TE
i
181
181
31D
31D
4. 5.
FAST001 x4
INSIDE VIEW
FAST001 x13

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 18
FITTING MESH PANELS
The mesh panels are fixed to the interior
of the wall panels.
There are six holes in the border of the
mesh panel, these align with holes in the
vertical jambs 70D in the wall panel and
are fixed with FAST001 screws.
The top and bottom FAST001 are to be
screwed from the inside of the panel.
The middle two are to be done from the
exterior.
If the panel is bowing out between
screws use additional fixings. Be sure to
predrill with a 3mm drill bit before using
additional FAST001 screws.
Repeat this for every mesh position.
MESH
20
FAST001 x6
WARNING: It is recommended that new galvanised mesh should be weathered for two
(2) months or scrubbed with a mild acidic solution, such as vinegar, then rinsed with
water before being used in bird housing applications.
NOTE: 70D has twin holes, use the
lower of the two to fix the mesh
panel.
70D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 19
Side wall
channels
fit into the
notched
rear wall
channels.
Position hasp centrally
over the padbolt shaft
and drill 3mm holes
and secure with screws.
NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel
are pre-punched for attaching roof sheeting. The base channels are not pre-punched.
Mesh panels are not shown for
illustrative purposes.
PANEL CONSTRUCTION
D
D
FAST001 x4
FAST013 x4
FAST013 x4
FAST013 x4
FAST001 x2

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15151FKFD
1.52mW x 1.52mD x 1.80mH
Model: A15151FKFD 28/04/2022 2.2 20
FINAL CONSTRUCTION
Each anchor consists of one nut, bolt, M10
dynabolt and steel angle.
Drill a 10mm hole into the wall sheet.
Drill a 10mm hole into the concrete.
Bolt and Nut*
M10 4.6/S
Steel Angle*
35 x 35 x 3
M10 Dynabolt*
* Denotes hot dip galvanised finish
Wall Sheet
Slab
ANCHORING OF
COOP
Location of 8
concrete anchors
Line up the holes in
the roof sheet with
front and back top
channels.
Secure with screws.
Line up the holes in
the roof lips with holes
in the top channel of
the side panels.
Secure with screws.
FAST001 x16
D
D
D
D
D
D