AC Infinity IONBEAM GREEN User manual

1
IONBEAM GREEN
PLANT NIGHT CYCLE WORK LIGHT
USER MANUAL

3
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com
and click contact for our contact information.
EMAIL
[e-mail]
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

4
MANUAL CODE NEG2308X1
MODEL
AC-NEG16
PRODUCT
IONBEAM GREEN
UPC-A
819137024380

5
MANUAL INDEX
Manual Index .................................................................................
Product Warning ............................................................................
Key Features .................................................................................
Product Contents ...........................................................................
Installation .....................................................................................
Controller Mounting .......................................................................
Starter Guide .................................................................................
UISTM Platform ...............................................................................
Connecting to UISTM ......................................................................
Programming .................................................................................
Other AC Infinity Products .............................................................
Warranty ........................................................................................
Page 5
Page 6
Page 7
Page 8
Page 9
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20

6
Ensure your power source conforms to the electrical requirements of this product.
Read all instructions before installing and using this product.
Be careful not to damage or cut the wire insulation (covering) during the installation. Do not
permit wires to come in contact with any sharp edges.
If you are unfamiliar or have doubts about performing this product's installation, seek the
services of a qualified, trained, and licensed professional. Inappropriate installation will void
this product's warranty.
This product must not be used in potentially hazardous locations such as flammable,
explosive, chemical-laden or wet atmospheres.
Do not cover power cords with rugs or other fabric materials.
Safety precautions should be exercised during the installation, operation, and maintenance of
this product.
Do not block or tamper with this product in any manner while it is in operation as it may cause
electric shock, fire, or damage to this product.
Do not depend on the on/off programming as the sole means of shutting power from this
product. Unplug the power cord before installing, servicing, or moving this product.
Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped,
or is damaged in any manner.
Avoid staring directly at any lighting fixture for extended periods of time.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:

7
KEY FEATURES
GREATER FLEXIBILITY
Optional diffuser evens light
distribution and increases
coverage area. Easily detach
for supplemental lighting.
ADJUSTABLE DIMMING
4 light intensity levels
provide increased versatility
to support work in grow tents
and larger grow rooms.
PLANT-GENTLE
Spectrum maintains dark
period integrity by providing
lighting that will not impact
your plant's grow cycle.
AUTO-OFF FUNCTIONALITY
Smart programming includes
automatic shut-off functionality
as well as UIS compatible for
access to more automations.
ENHANCED SPECTRUM
Supports existing blue
and red LED grow lights to
effectively improve overall
lighting quality.
VERSATILE MOUNTING
Cold-rolled steel bar with
matte black powder coating
provides sturdy base for
placement on any grow tent.

8
PRODUCT CONTENTS
HOOK AND LOOP
CABLE TIES
(x2)
WIRE
MOUNT
(x2)
WOOD SCREWS
(WALL MOUNT)
(x4)
BAR EXTENSION
CORD (M-F)
(x2)
UIS EXTENSION
CORD (M-M)
(x1)
MOUNTING
BAR
(x1)
POWER
ADAPTER
(x1)
LIGHT
CONTROLLER
(x1)
LIGHT
BAR
(x1)
LIGHT
DIFFUSER
(x1)

9
INSTALLATION
LIGHT BAR CHAIN ASSEMBLY
STEP 1
Connect the light bar's female port to the light
controller's male connector.
STEP 2
Connect the light controller to the power adapter.
EXTENDING THE CHAIN
You may connect the included bar extension
cords in between any link in this light bar chain
to lengthen it. Secure all connections using the
twist-on pieces. 1
2
MF
DIFFUSER
You may snap on the diffuser for a softer and
more even light distribution.

10
INSTALLATION
CANVAS MOUNTING
Magnetically mount your light bar to the wall or
ceiling of your grow tent.
Set the included mounting bar on the outer side
of your tent. Set your light bar at the exact spots
on the inner side.
Once mounted, you can move the light bar and
mounting bar connection along your grow tent
surface as needed.
Test that the magnetic connection through the
canvas is secure before use.
POLE MOUNTING
Magnetically mount your light bar directly
on your grow tent steel pole.
You may also use the included hook and
loop cable ties around your light bar and
mounting bar to adjust the lighting angle
and for extra security.
LIGHT BAR MOUNTING

11
INSTALLATION
LIGHT BAR MOUNTING
STEP 2 — WALL MOUNTING
Drill holes into the marked locations.
STEP 1 — WALL MOUNTING
Make sure that your mounting area is free from
obstruction. Use a mounting bar to mark your
drilling holes with the logo facing the wall.

12
INSTALLATION
STEP 4 — WALL MOUNTING
Align the mounting bar holes with the wall
anchors, making sure the logo faces the wall.
Screw or drill in the wood screws to secure the
mounting bar.
STEP 3 — WALL MOUNTING
If you are mounting onto anything other than a
wood support or stud, insert the included four
wall anchors into the drilled mounting holes.
You may need to use a hammer to secure them
through the holes.
LIGHT BAR MOUNTING

13
INSTALLATION
LIGHT BAR MOUNTING
STEP 5 — WALL MOUNTING
Set the light bar magnet ends onto the
mounting bar.
POWERING THE LIGHT
Plug the power adapter into a wall outlet.

14
CONTROLLER MOUNTING
STEP 1 — WALL MOUNTING
Locate a spot free of obstruction and secure
the anchor into your wall. Twist the wood screw
into the anchors.
STEP 2 — WALL MOUNTING
Use the mounting hole located on the back of
the controller for wall mount.
MAGNET MOUNTING
Magnetically mount the light controller onto any
steel surface.

15
STARTER GUIDE
GROW LIGHT PLACEMENT
Place your light bar at the top of your
grow space, shining down to provide even
coverage over the entire area.
Grow devices like inline fans and grow
lights can be placed below the light and
will not obstruct the light's reach.
LIGHT INTENSITY
Start your grow light at 25% light intensity.
Increase it as needed to provide a visible
workspace or to complement your main
grow light.

16
UISTM PLATFORM
The UISTM platform enables you to connect a single central controller with several grow devices
simultaneously. By creating this fully integrated system, you can power and program all your
devices together or separately for optimized grow tent management.
Your grow system can be regulated using your controller hub or remotely on the AC Infinity app
(paired with compatible controllers), where you will have access to automation programming and
climate data.
You can also connect your favorite grow light and outlet device to integrate them into the UIS
platform using our RJ11/12 adapter and control plug module.
Central controller and grow devices will be sold separately and may
still be in development at the time of your purchase of this product.

17
CONNECTING TO UISTM
IONBEAM LED grow lights can connect
with select smart controllers as part of an
integrated system using the included UIS
extension cord.
CONNECTING TO UIS CONTROLLERS
Use the included UIS M-M extension cord to
connect your light bar(s) to your selected UIS
controller via the light controller's side port.
Your selected UIS controller will override all of the light controller's onboard settings when
connected in this manner.

18
PROGRAMMING
1. LIGHTING
Pressing the light button will increase the light
intensity level in 25% increments (25% - 100%),
displayed with white LED indicators. Pressing
this button at 100% intensity will cycle to 0%.
Holding any button will shut off your light bar
and the timer. Pressing any button when your
light bar is off will turn the light and the timer
back on at their previous settings.
Setting the light intensity without setting a timer
will keep the light on indefinitely.
2. TIMER
Pressing the clock button will set the timer
in 5-minute increments (5MIN. - 20MIN.),
displayed with orange LED indicators.
Lighting will be active for the amount of time set
here (ex. 15MIN. for a 15 minute timer). It will
deactivate after the indicated time has passed.
Pressing any button when your light bar is off
will turn the light and timer back on at their
previous settings.
Pressing the clock button at the 20MIN. setting
will deactivate the timer.
3. UIS CONNECTION
Refer to the programming section
of your selected UIS controller for
programming instructions.
2
1
3

19
AC INFINITY PRODUCTS
Discover the latest innovations in environmental controls at acinfinity.com
Pruning Shears
Stainless-steel gardening shears designed to effectively trim and
fine-tune small plants to support healthy growth. The razor sharp
blades are coated in non-stick Titanium to prevent resin-buildup
through heavy use, and are controlled via spring-loaded handles
specially constructed for maximum comfort.
Bowl Trimmers
A manually operated trimming machine designed to quickly
and efficiently process high volumes of finely groomed herbs,
buds and flowers. Features straight blades for wet trimming and
serrated blades for dry trimming, controlled by an easy-to-use
removable hand crank and collected in a non-stick bowl.
Drying Racks
A polyester mesh netting rack designed to dry and cure plant
materials within a multi-tiered hanger system. The steel wireframe
build can support heavier capacities within its zippered chambers
while remaining collapsible for easy storage when not in use.

20
WARRANTY
This warranty program is our commitment to you, the product sold by AC Infinity will be free from
defects in manufacturing for a period of two years from the date of purchase. If a product is found
to have a defect in material or workmanship, we will take the appropriate actions defined in this
warranty to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any products sold by AC
Infinity or our authorized dealerships. The program covers products that have become defective,
malfunctioned, or expressively if the product becomes unusable. The warranty program goes into
effect on the date of purchase. The program will expire two years from the date of purchase. If your
product becomes defective during that period, AC Infinity will replace your product with a new one
or issue you a full refund.
The warranty program does not cover abuse or misuse. This includes physical damage, submersion
of the product in water, incorrect Installation such as wrong voltage input, and misuse for any
reason other than intended purposes. AC Infinity is not responsible for consequential loss or
incidental damages of any nature caused by the product. We will not warrant damage from normal
wear such as scratches and dings.
Contact our dealers department at [e-mail] or [phone] for more
information about our dealers and distributors program. Contact our customer service department
at [e-mail] or 626-923-6399 for product and warranty assistance. Our business
hours are Monday through Friday, 9:00 am to 5:00 pm PST.
If you have any issues with this product, contact us and we’ll
happily resolve your problem or issue a full refund!