AC MARINE KUM400 Series User manual

30mm
200mm
2 x N070F or
2 x N075F
per Antenna
Fix the M8 bolts
by max 3Nm
(Do not use
additional filler)
2 x N080F or
2 x N085F
per antenna
Fix the M8 bolts
by max 3Nm
(Do not use
additional filler)
2 x N090F
per antenna
Fix the M8 bolts
by max 3Nm
(Do not use
additional filler)
Bottom section
Top section
Hex key
PCB
(Coax cable
not included)
Box
Spring washer
Box cover
Tap screws
(4 pcs)
M10 bolts
(reused from
antenna)
Installation Guide
for
KUM400, KUM600,
KUM700 Series
and Mounts
Revision 2.0
N070F or N075F
Clamp Mount
Ø30-50mm
N080F or N085F
Clamp Mount
Ø50-80mm
N090F
Clamp Mount
Ø80-100mm
AC Marine has a
complete range of
mounting hardware
for the KUM series.
Mounts to be
ordered separately.
See datasheets for
all details.
Set screws
(2 pcs)
(Only applicable for type -1 and -2)
Package content:
AC Marine A/S
Pilehoej Vaenge 8E, DK-3460 Birkeroed, Denmark
WWW.ACMARINE.DK

A
B
DETAIL A
SCALE 2 : 5
1:
Fix the top part to
the bottom part by
max 31 Nm
2:
Fix the M6 set
screws (2 pcs) by min 5
Nm.
(Use Loctite on the set
screws for extreme
cases - Not supplied)
DETAIL B
SCALE 1 : 3
Connect Coax
Center Here
Connect Coax
Shield Here
Grounding Cable
(Termination is
system dependable)
(Only applicable for type -1 and -2)
Installation Guide
This is a guide only and does not form any contract or warranty
Follow current workmanship standards
For aditional details contact AC Marine A/S: [email protected]
AC Marine A/S
Pilehoej Vaenge 8E, DK-3460 Birkeroed, Denmark
WWW.ACMARINE.DK
Y
X
This drawing and the contents herein are property of AC Marine A/S and is strictly confidential. Complete or partly reproduction of this drawing or construction of any of the parts shown herein is strictly forbidden without prior written authorization by AC Marine A/S.
First angle