Acer V12LC Installation and operating instructions

Addendum
V12LC System User’s Guide PART NO. 49.56701.001
Note the following changes to the V12LC System User’s Guide.
Page 1-1 and 1-2
•The system board supports Pentium CPUs running at 75, 90,
100, 120, and 133 MHz.
Page 1-3
•Jumpers JP7 and JP9 do not appear on the system board
anymore.
•Item #13 on the system board layout should read “Multifunction
connectors”.
Page 1-11 and 1-12
•Jumpers JP7 and JP9 are deleted from the system board.
•Delete JP7 and JP9 from the jumper settings table.
Page 2-12 and 2-14
•The items “Memory at 15MB-16MB Reserved for” and “System
Memory Parity” in the Advanced Configuration screen are
switched.
Page 2-21
•The parallel port settings should have their respective IRQ
assignments as follows: 3BCh (IRQ 7), 378h (IRQ 7), and
278h (IRQ 5).
Page 2-21
•The default value of item 1F0h-1FFh on page 2 of the Non-PnP
ISA Card Configuration screen should appear as [---].
•The Non-PnP ISA Card Configuration screen page 3 is deleted.

PART NO. 49.43801.001 PI16 User’s Guide