Acnodes KVD1201 User manual

14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
KVD1201
1U Rackmount DVI-D KVM Switch
User Manual
KVD1201: 1U rackmount DVI-D KVM switch 12-port
with 1 user console

14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
KVD1201
1U Rackmount DVI-D KVM Switch
Legal Information
First En glish printing , October 2002
Inform ation in this document has be en care fully che cked for accuracy; howeve r, no g uara ntee is g iven to th e correctness of th e
con ten ts. The information in this docu men t is subject to cha nge withou t notice. W e are n ot liable fo r any injury o r lo ss that
results from the use of this equip ment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
¦ Unplug equ ipment bef ore clean in g. Don’t use liquid or spray deterge nt; use a moist cloth.
¦ Keep eq uipment a way from excessive humidity and heat. Prefe rabl y, keep it in an air -conditioned environm ent with
tempe ratures not exceeding 40º Celsius (10 4º Fah renheit).
¦ Wh en installing , place the eq uipme nt on a sturd y, level surface t o pre ven t it from accidenta lly falling and causin g dam
age to ot her eq uipme nt or injury to persons nearb y.
¦ Wh en the e quipment is in an ope n po sition, do not cove r, block or in an y way obstru ct the gap between it and the
power sup pl y. Prop er air convection is ne cessary to keep it from o verheating.
¦ Arrange th e eq uipme nt ’s powe r cord in such a way th at others wo n’t trip or fall over it.
¦ If you a re using a power cord th at d idn’t ship with the eq uipment, ensure that it is rated fo r the voltage and curre nt
lab eled on th e eq uipme nt ’s electrical ra tings label. The voltage ratin g on the cord sho uld be higher than the one listed
on the eq uipme nt ’s rat ings label.
¦ Observe all precautions and wa rnings attached to the e quipm ent .
¦ If you d on’t inte nd on using t he equipm ent for a long t ime, d isconnect it from the pow er outlet to prevent being dam
aged by transient over -voltage.
¦ Keep all liquids aw ay from the equ ipmen t to minimize the risk of a ccidental spillage. Liquid spilled on to th e p ower
sup ply or on o the r h ardwa re m ay cause dama ge, fire or electrical sho ck.
¦ Only qua lified se rvice personnel should open th e chassis. Opening it you rself cou ld dam age the equipment and invali
date its wa rrant y.
¦ If an y part of the equ ipmen t be comes dama ged or stops fun ction ing, h ave it checked b y qualifie d service personne l.
What the w arranty does not cove r
¦ Any product, on w hich the se rial numb er has b een defaced, modified or rem oved.
¦ Damag e, d ete rioration or m alfun ction resulting from:
? Accide nt, m isuse, ne glect, fire , wa te r, lightn ing, or othe r acts of n ature, un auth orized prod uct modification, or
failure to follo w instructions supplied with the product.
? Re pair or at tempted repair by a nyone not authorized by us.
? Any damag e o f th e prod uct due t o shipme nt.
? Re moval or installation of the product.
? Ca uses exte rn al to the product, such as electric power f luctuation or failure.
? Use of sup plies or parts not mee ting our specifications.
? No rmal wear and tea r.
? Any other causes which doe s not re late to a pro duct defect.
¦ Removal, insta llation, and se t -up service charges.
R egulatory Notice s Federal Communications C om miss ion (FCC)
Th is equipme nt has be en te sted and fou nd t o com ply with the limits for a Class B digital device, p ursuant to Part 1 5 of the F CC
rules. The se limits are designed to provide reason able prote ction again st harm ful in terference in a residential instal - lation.
Any chan ges o r mod ifications m ade to this e quipment ma y void the u ser’s authority to operate th is equipm ent. This equipm ent
generates, u ses, and can ra diate radio frequency en ergy and, if n ot installed and used in a ccorda nce w ith the instructions, m ay
cau se harmful interfe rence to radio com mu nications.
H owever, t here is no guarantee th at interferen ce will not occur in a particular installation. If this equip men t does cause
harmful interference to radio or television recept ion, which can be determined by turn in g the equipment of f and on , the user
is encouraged to try to correct th e interference by one or mo re of the following m easures:
¦ Re -position or relocat e the receiving antenna .
¦ Incre ase th e separation b etween the e quipm ent and receive r.
¦ Connect the equipment into an outlet on a circuit di fferent from that to w hich the receiver is conn ected.

14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
KVD1201
1U Rackmount DVI-D KVM Switch
Contents
< Part 1 > DVI-D KVM KVD1201
1.1 Package contents
1.2 KVM port connection
1.3 Specifications
P.1
P.2
P.3
< Part 2 > Usage
2.1 KVM Button
2.2 KVM Hotkey
2.3 DC power 12V, 24V, 48V Input
P.4
P.5
P.6

14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
KVD1201
1U Rackmount DVI-D KVM Switch
Before Installation
¦It is very im portant to mount the equipment in a suitable cabinet or on a stable surface.
¦Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediatel y.
Installation for standalone KVM
Screw A: 2 pcs Screw B: 8 pcs
M3.2 x 4.5 mm M4 x 10 mm
¦Install each bracket using screws
AB provided shown in Figure 1.
¦Fix the KVM into the rack
Figure 1.

14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
KVD1201
1U Rackmount DVI-D KVM Switch
Part 1. DVI-D KVM
< 1.1 > Package Contents
KVD1201
KVM unit • DVI-D KVM unit x 1
• Mounting set w/ bracket & screws x 1
• Power adapter w/ power cord ( for KVM ) x 1
KVD1201
12VDC Audio 12 11 10 9 8 7
Console 6 5 4 3 2 1
IP console, remote console, daisy-chain and OSD menu are NOT available for this model.

14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
KVD1201
1U Rackmount DVI-D KVM Switch
< 1.2 > KVM port connection
USB Servers
DVI-D KVM port
12 11 10 9 8 7
6 5 4 3 2 1
USB Servers
DVI KVM Cable
6 feet DVI KVM cable
15 feet DVI KVM cable
( Server end : DVI-D + USB + Audio )
( KVM port : DVI-D + USB3.0 )

< 1.3 > Specifications
KVD1201
D
¯KVM Port
Number of ports: 12
Connector: DVI-D connector
USB 3.0 connector ( combined for keyboard, mouse & audio )
Connectivity: Com bo 4-in-1 KVM cable, 6 or 15 feet
¯Local Console
Graphic connector: 1 x DVI-D
Resolution: Up to 1920 x 1200
Input device: 2 x USB type A for keyboard & mouse
Audio out: 1 x 3.5mm stereo audio
¯Management
PC Selection: Front button & keyboard hotkey
¯Compatibility
Multi-platform: Mix PCs, SUN and Mac G3 / G4 Mac / iMac
Support: Windows 7 / Vista / 2003 / XP, Linux, Unix
¯Power
Input: 100 or 240V AC at 50 or 60 Hz via IEC type cord
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 12 Watt, Standby 5 Watt
¯Regulatory Approval: FCC, CE
¯Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)
¯Product Information
Dimension (W x D x H): 443 x 171 x 43.6 mm / 17.4 x 6.7 x 1.72 inch
Net weight: 3 kg / 6.5 lb
¯Packing Information
Dimension (W x D x H): 500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch
Gross weight: 5 kg / 11 lb

14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
KVD1201
1U Rackmount DVI-D KVM Switch
Part 2. Usage
2.1 KVM Button
Power ON
¦Turn off all servers and KVM switches
¦Make sure all cables / connectors are properly connected
¦Recommend Power ON sequence is monitor, KVM switch finally computer
Front Panel - Port LED Indications
DVI-D KVM 12 ports
PC port LEDs Channel
button
Button B is
non-functional
PC port LEDs Online :Blue LED on indicating a PC is connecting to the port
Active :Green LED on indicating a selected channel
Channel button Press to select channel from 01 to 12

14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
KVD1201
1U Rackmount DVI-D KVM Switch
2.2 KVM Hotkey
Hotkey
Function
Scroll Lock
+
Scroll Lock
+
Switch to previous port
Scroll Lock
+
Scroll Lock
+
Switch to next port
Scroll Lock
+
Scroll Lock
+
Port no.
Switch to specific port
Scroll Lock
+
Scroll Lock
+
S
Auto scan for powered on PC
Scroll Lock
+
Scroll Lock
+
B
Enable / Disable beeper sound
Remarks:
¦Example of “Scroll Lock +Scroll Lock + Port no.”
-Port No. : 01 to 12
-e.g. Port 4 : Scroll Lock +Scroll Lock +0+4
-e.g. Port 12 : Scroll Lock +Scroll Lock +1+2
¦You must press the hotkey within 2 seconds
¦A beep sound will be heard for successful entering
Hotkey Label

14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
KVD1201
1U Rackmount DVI-D KVM Switch
2.3 DC Power 12V, 24V, 48V Input
Model
12V
24V
48V
Input rating
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
Input current
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output rating
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
Remarks:
¦Package does not include power cord