Acrosser Technology AR-B5800 Installation guide

AR-B5800 Quick Manual
220010415-G
1
AR-B5800 Quick Manual
1.Mainboard illustration (Top Side)
RTC1
System RTC battery socket Intel ICH7R
PCIEXP1
PCI-Express X8 Slot DIMM1 240-Pin DDR3 Socket
LGA775 CPU Socket
DIMM2
240-Pin DDR3 Socket
Intel GMCH 82G41
AR-B5800 Quick Manual
220010415-G
2
2. Locations of IO ports & Jumper settings definition

AR-B5800 Quick Manual
220010415-G
3
LAN1
LAN1 RJ45 Connector FP_USB1
Internal USB2, USB3 connector. SYSFAN2 System FAN Connector.
LAN2
LAN2 RJ45 Connector
LCM1
Pin Header for LCM SYSFAN1
System FAN Connector.
LAN3
LAN3 RJ45 Connector GP1
GPIO Header.
JP1
For LAN1/LAN2 Bypass Function
Select.
LAN4
LAN4 RJ45 Connector. JP2
GPIO Header Voltage Selection. RTC1 CR2032 Battery Hold Connector.
LAN5
LAN5 RJ45 Connector CF1
CF CARD SOCKET. CCMOS1 CMOS Memory Clearing Header
LAN6
LAN6 RJ45 Connector
CPLD1
For CPLD Firmware Update
JP4
For LAN3/LAN4 Bypass Function
Select.
LAN7
LAN7 RJ45 Connector.
ATXPWR1
ATX Power Supply input connector..
LAN8
LAN8 RJ45 Connector. SATA2
SATA device connector #2.
USB1
Two USB ports (USB0, USB1)
connector.
SATA1
SATA device connector #1.
COM1
RS232 Serial Port COM1.(RJ45)
VGA1
VGA connecter (2x5 Pin Header)
LED1
4 in 1 LED for LAN Bypass, Power &
HDD LED.
ATX12V1
ATX12V Power Supply input
Connector.
RST2
System Reset Switch. SYSFAN3
System FAN Connector.
FP_USB2
Internal USB4, USB5 connector. CPUFAN1
CPU FAN Connector.
AR-B5800 Quick Manual
220010415-G
4
2.1 Connectors and Jumper Settings
1. LAN1 ~ LAN8 RJ45 Connector 9. USB1 Connector
LAN RJ45 Connector
Connects to Local Area
Network.
External USB Connector
Connects to USB devices such as scanner,
digital speakers, monitor
, mouse, keyboard, hub, digital camera,
joystick etc.
10. COM1 ( RJ45 Connector ) 11. LED1
COM Port RJ45 Connector
Green1: Power ON LED.
Green2: HDD LED
Yellow1: LAN3&LAN4 Bypass LED.
Yellow2: LAN1&LAN2 Bypass LED.
12. RST2 13,14. FP_USB1 & FP_USB2
Push this button to reset
the system.

AR-B5800 Quick Manual
220010415-G
5
15. LCM1 ( for LCM use ) 16. GP1 ( GPIO Header )
Pin SIGNAL
1 Pull-High to VCC5
2 VCC5
3 SOUTB
4 SINB
5 RTSB#
6 CTSB#
7 GND
PIN SIGNAL PIN SIGNAL
1VCC_GP2 GND
3GP30 4 GP34
5GP31 6 GP35
7GP32 8 GP36
9 GP33 10 GP37
17. JP2 GPIO Header Voltage Selection 18. CF1 ( CF CARD Socket )
Pins 1 and 2 shorted
(Default): VCC 5
Pins 2 and 3 shorted:
VCC 3
19. CPLD1 ( for CPLD Firmware Update) 20. ATXPWR1 (ATX Power Supply Input )
Pin SIGNAL
1 3VDUAL
2 G_TDO
3 G_TDI
4 NC
5 NC
6 G_TMS
7 GND
8 G_TCK
AR-B5800 Quick Manual
220010415-G
6
21,22. SATA2, SATA1 (SATA device
connector #2 and #1). 23. VGA1 (2x5pin 2mm Wafer).
To connect SATA device:
1.Attach either end of the signal cable
to the SATA connector on
motherboard.
Attach the other end to the SATA
device.
2. Attach the SATA power cable to the
SATA device and connect the other
end
from the power supply.
VGA Wafer CONNECTOR .
PIN SIGNAL PIN SIGNAL
1Red 2 GND
3Green 4 GND
5Blue 6 GND
7VSYNC 8 DDCCLK
9 HSYNC 10 DDCDATA
24.ATX12V1. (ATX12V Power Input) 25. SYSFAN3 (System FAN connector 3).
PIN SIGNAL
1GND
2+12V
3Fan speed data
26. CPUFAN1 (CPU FAN connector). 27. SYS_FAN2 (System FAN connector
2).
ON/OFF controlled by CPU
temperature setting of BIOS.
PIN SIGNAL
1GND
2+12V
3Fan speed data
4CPU FAN PWM
Control
PIN SIGNAL
1GND
2+12V
3Fan speed data

AR-B5800 Quick Manual
220010415-G
7
28. SYS_FAN1 (System FAN connector 1). 29. JP1 (For LAN1/LAN2 Bypass Function
Select.).
PIN SIGNAL
1 GND
2 +12V
3 Fan speed data
Pins 1 and 2 shorted
(Default): Forced Normal.
Pins 2 and 3 shorted:
Controlled By CPLD.
Otherwise : Forced Bypass
30. RTC1 31. CCMOS1.
CMOS Backup Battery:
An onboard battery saves the CMOS memory to
keep the BIOS information stays on even after
disconnected your system with power source.
Nevertheless, this backup battery exhausts after
some five years.
Once the error message like “CMOS BATTERY
HAS FAILED” or “CMOS checksum error”
displays on monitor, this backup battery is no
longer functional and has to be renewed
32. JP4 (For LAN3/LAN4 Bypass Function
Select.).
Pins 1 and 2 shorted
(Default): Forced Normal.
Pins 2 and 3 shorted:
Controlled By CPLD.
Otherwise : Forced Bypass