Acrosser Technology AR-B5292 User manual

AR-B5292 User‟s Manual
AR-B5292 PCI I/O board with discrete I/O, battery backup SRAM, 1/99
Timer, power off intrusion event logger and Protect-U
AR-B5292 Gaming Board
PCI I/O Board with discrete I/O, battery backup SRAM,
Timer, power-off intrusion Event Logger and Protect-U
Edition: 1.1
Book Number: AR-B5292-09.04.06

AR-B5292 User‟s Manual
2/99
Document History
Version
Date
Description
1.0
2007/08/10
Initial release
1.1
2009/04/06
1.Notice for Rechargeable battery(P.99)
Please charge the battery 24hrs firstly before using.
2.Modify Audio output connector(P.14)

AR-B5292 User‟s Manual
3/99
© Copyright 2006
All Rights Reserved.
Manual‟s first edition: October 31, 2006
For the purpose of improving reliability, design and function, the information in this document is subject to
change without prior notice, which does not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential
damages arising out of the use or inability to use the product or documentation, even if advised of the
possibility of such damages.
This document contains proprietary information protected by copyright. All rights are reserved. No part of
this Manual may be reproduced by any mechanical, electronic, or other means in any form without prior
written permission of the manufacturer.
Trademarks
AR-B5292 is a registered trademark of Gaming and Multimedia Acrosser. IBM PC is a registered
trademark of International Business Machines Corporation. Pentium is a registered trademark of Intel
Technologies Inc. Award is a registered trademark of Award Software International, Inc. Other product
names mentioned herein are used for identification purposes only and may be trademarks and/or
registered trademarks of their respective companies.

AR-B5292 User‟s Manual
4/99
Contents
1 INTRODUCTION ........................................................... 5
1.1 SPECIFICATIONS ............................................................................. 5
1.2 WHAT YOU HAVE ............................................................................ 6
1.3 BLOCK DIAGRAM............................................................................. 7
2 INSTALLATION.............................................................. 8
2.1 LOCATIONS..................................................................................... 8
2.2LIST OF CONNECTORS AND JUMPER SETTINGS................................ 12
2.3 JUMPER SETTING AND OWN PIN DEFINITIONS .................................. 13
3 BIOS SETTING............................................................ 18
3.1 MAIN SETUP ............................................................................. 19
3.2 ADVANCED CHIPSET SETUP........................................................... 20
3.3 PNP/PCI SETUP ........................................................................... 21
3.4 PERIPHERALS SETUP .................................................................... 22
3.5 PC HEALTH SETUP ....................................................................... 23
3.6 BOOT SETUP................................................................................. 24
3.7 EXIT SETUP................................................................................ 25
4 AGC REGISTER DESCRIPTION................................ 27
4.1 PCI CONFIGURATION REGISTER..................................................... 27
4.2 SRAM MEMORYADDRESS MAP .................................................... 31
4.3 I/O-INTERFACE ADDRESS MAP....................................................... 32
5 AGC DRIVER AND LIBRARY...................................... 41
5.1 WINDOWS DRIVER AND LIBRARIES.................................................. 41
5.2 LINUX DRIVER AND LIBRARIES........................................................ 53
5.3 INTERRUPT CALL BACK FUNCTION ARCHITECTURE........................... 64
6 AGA LIBRARY ............................................................. 66
6.1 PROTECT-U SYSTEM..................................................................... 66
6.2 DATA SETS................................................................................... 67
6.3 USING AGAFUNCTIONS................................................................ 68
6.4 AGA-API LIBRARY INTRODUCTION................................................. 69
6.5 AGA-API LIBRARY ....................................................................... 71
6.6 ERROR MESSAGES ....................................................................... 88
7 ELECTRICAL CHARACTERISTICS............................ 89
7.1 BASIC ELECTRICAL CHARACTERISTICS TABLE .................................. 89

AR-B5292 User‟s Manual
5/99
1
INTRODUCTION
Welcome to the AR-B5292 Gaming Computer. The AR-B5292 incorporates the advanced Intel®
915GME Chipset. It supports the Pentium M and Celeron M processors, while coming with a
400/533MHz Front Side Bus.
The AR-B5292 is a Complete Platform that totally supports Gaming Application. ex. Random
Number Generator, JAMMA (Japanese Amusement Machine Manufacturers' Association) and
General Gaming interface, non-volatile Memory, and Security Protection. All of the main feature
is realized by Acrosser Own Design Chip, A.G.C. (Acrosser Gaming Core) and A.G.A. (Acrosser
Gaming Agent).
AGC is a PCI interface I/O and SRAM controller. General Gaming interface, JAMMA interface,
SRAM controller and Timer are controlled by AGC.
AGA is a Micro Controller. Security, Power monitor, Random number generator are controller by
AGA.
1.1 Specifications
Intel Socket M(478) or BGA FSB 400/533MHz Pentium M or Celeron M processor
Intel 915GME & ICH6M chipset
29 bits interruptible digital inputs
24 isolated inputs for button, coin, key & bill inputs (4N35, PC817,PC847)
5 TTL level inputs
16-bit spare user define GPIO
43 bits 500mADarlington transistor outputs
4 x 16-bit Interruptible Timer
Three RS-232 and Two ccTalk serial ports/RS232 selectable
JAMMA and 72-pin golden finger interface
Intrusion logger
iButton & ProtectU, security
Dual 128KB battery back-up SRAM with low-battery monitor
Second real time clock
Two 8-bit readable DIP switch
6 watts stereo amplifier
True random number generator

AR-B5292 User‟s Manual
6/99
1.2 What You Have
Before you begin to install your AR-B5292 board, please make sure that the following items are
inside the AR-B5292 package.
The quick manual
1 AR-B5292 board
1 Software utility CD

AR-B5292 User‟s Manual
7/99
1.3 Block Diagram
AGC
COM1
COM3、COM4
Or
ccTalk1、ccTalk2
GPIO
CPU
North
Bridge
Dual Channel DDR2
CRT
LVDS
Dual
SRAM
CF/HD
2 SATA
KB/MS
6 USB
PC
I
DMI
FSB
LPC
AGC
Serial Poart
1. iButtoon
2. Second RTC
3. PTU
4. intrusion logger
5. battery low detector
6. RNG,
EEPRO
M
COM5、COM6
I2C

AR-B5292 User‟s Manual
8/99
2
INSTALLATION
This chapter describes the installation of AR-B5292.At first, it shows the Function diagram and
the layout of AR-B5292. It then describes the unpacking information which you should be careful
with, as well as the jumper/switch settings for the AR-B5292 configuration
2.1 Locations
Golden Fingers, Main Chips and Standard connectors (Top Side)

AR-B5292 User‟s Manual
9/99
SCN1
D-Sub 15-pin VGA connector
COM1
D-Sub 9-pin RS232 connector
Super I/O Controller
Winbond W3627EHF
BZ1
The Buzzer for PC beep sound
SCN2
IDE PATA Hard Disk Connector
72 PINs Golden Fingers
General Gaming interface
SATA1 & SATA2
Standard 7-pin SATA connector (optional)
ICH6 M
I/O Controller Hub 6 M
CN2
CR2032 Size Coin Battery
U52
iButton
20 PINs Golden Fingers
Work with 72 Pins Golden Fingers
USB 1
2 USB and 1 RJ-45 for LAN
KM1(optional)
Purple for keyboard and Green for mouse
Processor
Socket for Pentium M / Celeron M
J1 & J2
Dual channel DDR2 DIMM socket
GMCH
Graphic Memory Control Hub
Intel 915GME
JAMMA Interface
Japanese Amusement Machine Manufacturers' Association

AR-B5292 User‟s Manual
10/99
Standard Connectors (Bottom Side)
Acrosser‟s Own Connectors and Jumper Switch Settings.

AR-B5292 User‟s Manual
11/99
SW2 & SW3
Software readable switch
JP3
Keyboard Lock
FAN1
CPU Fan connector
ccTalk
ccTalk
JP7
Enable UDMA66/100
SW1
CPU Clock Strapping
CN1(optional)
Connector for Back Light Inverter
JP1(optional)
Switch for selecting 3V or 5V Panel
LVDS1(optional)
Connector for LVDS signals
JP9 & JP10
Switch for setting audio out with or without Amplifier
USB4
USB DOM connector
SW4
Front side bus clock strapping
JP18 & JP17
CCtalk input voltage
VGA1
SDVO-CRT
J3(optional)
Spare user-defined GPIOs (optional)
LED1
LED for Power & HD & and PS_ON
SW5 & SW6
Pin header for switching to ccTalk or RS232
FAN2
System Fan connector
JP8
CF Card slave/master switch
COM5 & COM6
RS232 Serial Ports
J6
Rechargeable Battery for AGA and SRAM1
BAT1
Rechargeable Battery for SRAM2
JP11 & JP5
SRAM1 and SRAM2 Clear
COM3 & COM4
RS232 Serial Ports
JP2
First RTC (Real Time Clock) Reset.
USB2 & USB3
Pin header for 4 USB ports
Audio1
Audio output connector
SATA3(optional)
Pin header for SATA DOM (optional)

AR-B5292 User‟s Manual
12/99
2.2 List of Connectors and Jumper Settings
＊The number in the sign is the ordinal in chapter 2.3
2. List of Connectors and Jumper Settings
Function
Part Reference
Description and Note
Serial Port
1. COM1
2. COM2
3. COM3 & COM4 / ccTalk1 & ccTalk2
4. SW5 & SW6
5. COM5 & COM6
1. COM1 is D-sub 9 RS-232 port
2. COM2 is used for internal Communications
3. COM3 & COM4 share the Serial Port with ccTalk1 & ccTalk2.
4. SW5 can be set to use COM3 or ccTalk1 that shares the same serial
port. SW6 is the same function for COM4 and ccTalk2.
5. COM5 & COM6 are for RS232 COM port.
Fan
1. Fan1
2. Fan2
1. Fan1 is for CPU
2. Fan2 is for system
USB & LAN
1. USB1
2. USB2 & USB3
1. USB1 includes 2 USB 2.0 ports and 1 10/100 Ethernet
2. USB2 & USB3 are the 10 pin headers defined by Acrosser.
Battery
1. CN2
2. J6
3. BAT1
1. CN2 is CR2032 Coin Battery Socket for RTC.
2. J6 is a rechargeable battery connector for AGA and SRAM1.
3. BAT1 is a rechargeable battery connector for SRAM2.
VGA & LVDS
Display
1. SCN1
2. CN1
3. JP1
4. LVDS1
1. SCN1 is a D-sub 15-pin Connector for CRT Display output.
2. CN1 can connect to an LCD panel‟s inverter to light on the LCD Panel.
3. JP1 can set the LCDVCC power（3V or 5V）on LVDS1.
4. LVDS1 is a DF-13 connector for the connection with the LVDS panel.
Bus Frequency
1. SW1
2. SW4
1. SW1 for CPU Frequency
2. SW4 for Front side bus Frequency
Storage
1. SCN2
2. CN6
3. JP7
4. JP8
5. SATA1 & SATA2 (option)
6. SATA3
1. SCN2 for IDE PATA Hard Disk
2. CN6 for compact Flash Card
3. JP7 for UDMA 66/100 Enable/Disable
4. JP8 for CF card Slot Master/Slave
5. SATA1 & SATA2 For SATA Hard Disk
6. SATA3 for SATA Disk On Module.
Memory
1. J1 & J2
2. JP11 & JP5
1. J1 & J2 for DDR2 RAM Module
2. JP11 & JP5 for SRAM1 and SRAM2 Clear.
Audio
1. JP9 & JP10
2. Audio1
1. JP9 & JP10 forAudio out with or without amplifier
2. Audio output connector
Keyboard & Mouse
1. KM1
2. JP3
1. KM1 for PS2 Keyboard & Mouse
2. JP3 for Keyboard Lock/Unlock.
Indicator
1. LED1
2. BZ1
3. USB1
1. LED1 for Power-In, system Turn-on, Hard disk Indicator.
2. Buzzer for PC beep sounds.
3. USB1 has two LEDS for LAN port Indicator.
Power
PWRIN1
For Power Supply Input
Free Switch setting
(defined by user)
SW2 & SW3
For User-defined setting switch.
GPIOs
J3
J3 Fo0r spare user-defined GPIOs
RTC
JP2
JP2 For RTC Power and Reset
CCtalk
JP17 & JP18
Setting CCtalk transmitted voltage

AR-B5292 User‟s Manual
13/99
2.3Jumper setting and Own Pin Definitions
J3 (user-defined GPIOs [optional])
1 14
13 25
PIN
SIGNAL
PIN
SIGNAL
1
K0
14
K1
2
K2
15
K3
3
K4
16
K5
4
K6
17
K7
5
L0
18
L1
6
L2
19
L3
7
L4
20
L5
8
L6
21
L7
9
GND
22
GND
10
GND
23
GND
11
GND
24
GND
12
GND
25
GND
13
GND
LED1 (LED for Power & HD & and PS_ON)
R
G
Y
LED
SIGNAL
RED
PS-ON
GREEN
Hard
Disk
YELLOW
Power
SW5 & SW6 (Pin header for switching to
ccTalk or RS232 ports)
PIN
Setting
3-5
close
4-6
close
For ccTalk
1-3
close
2-4
close
For RS232
port
FAN2 (System Fan connector)
1 2 3
PIN
SIGNAL
1
Data
2
12V
3
GND
JP8 (CF Card slave/master switch)
PIN
SIGNAL
Close
Master
Open
Slave
COM3 & COM4 & COM5 & COM6
(RS232 Serial Ports)
PIN
SIGNAL
PIN
SIGNAL
1
-DCD
2
-DSR
3
SIN
4
-RTS
5
SOUT
6
-CTS
7
-DTR
8
-RI
9
GND
10
GND

AR-B5292 User‟s Manual
14/99
J6 (Rechargeable Battery for micro
controller)
PIN
SIGNAL
1
GND
2
3.3V
BAT1 (Battery for SRAM)
1 2
PIN
SIGNAL
1
GND
2
3.3V
JP11 & JP5 (SRAM1 and SRAM2 Clear)
JP11 for SRAM1
JP5 for SRAM2
PIN
SIGNAL
Close
SRAM
Clear
Open
Keep
Data
JP2 (First RTC Reset)
STATUS
SETTING
1-2
close
Supply RTC
power
2-3
close
RTC Reset
USB2 & USB3 (Pin header for 4 USB
ports)
PIN
SIGNAL
PIN
SIGNAL
1
5V
2
5V
3
-USB0
4
-USB1
5
+USB0
6
+USB1
7
GND
8
GND
9
GND
10
GND
AUDIO1 (Audio output connector)
With Amplifier
Without Amplifier
PIN
Signal
Signal
1
Right +
Right
2
Right -
GND
3
Left+
Left
4
Left-
GND
SATA3 (Pin header for SATA DOM)
1 2
9 10
PIN
SIGNAL
PIN
SIGNAL
1
GND
2
TX+
3
TX-
4
GND
5
GND
6
RX-
7
RX-
8
GND
9
5V
10
NC
SW2 & SW3 (Software readable switch)
STATUS
SIGNAL
OFF
3.3V
ON
GND

AR-B5292 User‟s Manual
15/99
JP3 & KBMS1(Keyboard Lock and JST
connector for Keyboard and Mouse)
6 5 4 3 2 1
PIN
SIGNAL
Open
Keyboard
Lock
Close
Keyboard
Unlock
PIN
SIGNAL
PIN
SIGNAL
1
MS data
4
5V
2
KB data
5
MS
clock
3
GND
6
KB
clock
FAN1 (CPU Fan connector)
1 2 3
PIN
SIGNAL
1
Fan speed data
2
12V
3
GND
ccTalk1 & ccTalk2 (Serial Port for ccTalk)
4 3 2 1
PIN
SIGNAL
1
5V
2
NC
3
COM
4
DATA
JP7 (Enable UDMA66/100)
PIN
SETTING
Open
Disable UDMA66/100
Close
Enable UDMA66/100
SW1 (CPU Clock Strapping)
Refer to SW3 for Front Side Bus setting
1
2
SETTING
ON
ON
Automatic Setting for
Dothan CPU
OFF
OFF
Manual Setting or For
Banias CPU
CN1 (Connector for Back Light Inverter)
6 5 4 3 2 1
PIN
SIGNAL
PIN
SIGNAL
1
12V
4
Back Light On
2
12V
5
GND
3
GND
6
Back Light
Control
JP1 (Set the LCDVCC power to 3V or 5V
on LVDS1)
STATUS
SETTING
1-2
close
3.3V
2-3
close
5V

AR-B5292 User‟s Manual
16/99
LVDS1 (Connector for LVDS signals)
PIN
SIGNAL
PIN
SIGNAL
2
GND
1
LCDVCC
4
NC
3
NC
6
NC
5
GND
8
GND
7
NC
10
NC
9
NC
12
NC
11
NC
14
NC
13
NC
16
CLOCK+
15
GND
18
GND
17
CLOCK-
20
TX2-
19
TX2+
22
TX1-
21
NC
24
NC
23
TX1+
26
TX0-
25
TX0+
28
TX3-
27
TX3+
30
LCDVCC
29
LCDVCC
JP9 & JP10 (Switch for setting audio
out with or withoutAmplifier)
STATUS
SETTING
1-3
close
2-4
close
Audio Out with Amplifier
3-5
close
4-6
close
Audio Out without
Amplifier
PWRIN1 (12V and 5V Power-In
connector)
PIN
SIGNAL
1
5V
2
GND
3
12V
4
GND
SW4 (Front side bus clock strapping)
Refer to SW1 for CPU setting
PIN
STATUS
SETTING
1
OFF
Setting For Dothan CPU
ON
Setting For Banias CPU
2
ON
Setting For 400MHz FSB
3
ON
4
OFF
2
ON
Setting For 533MHz FSB
3
OFF
4
OFF
2
OFF
Automatic setting for
Dothan CPU
3
OFF
4
OFF
CN8,CN9 (Intrusion logger)
CN8
CN9
PIN1
PORTA 6
PORTA 7
PIN2
GND
GND

AR-B5292 User‟s Manual
17/99

AR-B5292 User‟s Manual
18/99
3
BIOS SETTING
This chapter describes the BIOS menu displays and explains how to perform common tasks
needed to get up and running. It also gives detailed explanation of the elements found in each of
the BIOS menus. The following topics are covered:
Main Setup
Advanced Chipset Setup
Peripherals Setup
PnP/PCI Setup
PC Health Setup
Boot Setup
Exit Setup

AR-B5292 User‟s Manual
19/99
3.1 MAIN SETUP
Once you enter the AwardBIOS™ CMOS Setup Utility, the Main Menu will appear on the screen.
Use the arrow keys to highlight the item and then use the <Pg Up> <Pg Dn> keys to select the
value you want in each item.
Note : Listed at the bottom of the menu are the control keys. If you need any help with the item
fields, you can press the <F1> key, and it will display the relevant information.
Option
Choice
Description
Date Setup
N/A
Set the system date. Note that the „Day‟ automatically
changes when you set the date
Time Setup
N/A
Set the system time
IDE Channel 0
Master/Slave
N/A
The onboard PCI IDE connectors provide 1 channel for
connecting up to 2 IDE hard disks or other devices.
The first is the “Master” and the second is “Slave”,
BIOS will auto-detect the IDE type.
Halt On
All Errors,
No Errors,
All but keyboard.
Select the situation in which you want the BIOS to stop
the POST process and notify you.

AR-B5292 User‟s Manual
20/99
3.2 Advanced Chipset Setup
Option
Choice
Description
Quick Power On
Self Test
Enabled
Disabled
This category speeds up Power On Self Test (POST) after
you have powered up the computer. If it is set to Enable,
BIOS will shorten or skip some check items during POST.
Full Screen Logo
Show
Enabled
Disabled
Select Enabled to show the OEM full screen logo if you
have add-in BIOS.
USB Keyboard
Support
Enabled
Disabled
Select Enabled if your system contains a Universal Serial
Bus (USB)controller and you have a USB keyboard..
On-Chip Frame
Buffer Size
1Mb
8Mb
This Item is for setting the Frame Buffer (Share system
memory as display memory).
Boot Display
CRT
LCD
CRT+LCD
This Item is to set display device
Panel Type
800x600,
1024x768,
1280x1024
This Item can Set the LVDS panel resolution that you want
DVMT mode
FIXED
DVMT
Both
This item sets the mode for dynamic video memory
technology (DVMT).
DVMT/FIXED
Memory Size
64Mb
128Mb
This item sets the DVMT size