ActionTec Wireless USB Driver 802UAT1 User manual

802UAT1 Wireless USB Driver Installation Instructions
802UAT1 Wireless USB Driver Installation Instructions
1. When the driver download begins select "Save" when prompted to either "Run" or Save".
2. When choosing where the file will be saved be sure to select a familiar location like My
Documents or the Desktop. This way when the download has finished the file(s) is easy to
find.
3. The driver download is a Self-Extracting ZIP file. Start it like you would any application.
4. Users with XP may be prompted to “Run” or “Cancel” select “Run”. After selecting “Run”
the program will prepare to install the drivers on the computer. The default location can be
changed but if it is left at the default the program will create a folder and install all of the
drivers into that folder. The default behavior is to create the folder in the same location as
the program it self. So the folder will be in the same location as the downloaded file making
it easy to find.
5. Power up the Windows computer and connect the Wireless USB Adapter.
6. This will cause the Hardware Wizard to open if prompted to use Windows Update select
“No not this time.” and click NEXT.
7. It is very unlikely that Windows would be able to locate the driver on its own so select
“Install from a List or Specific Location (Advanced)” and click NEXT.
8. Choose “Search for the best driver in these locations.” for Windows to search. Deselect
“Search Removable Media (floppy CD-ROM…) and instead select “Include this location in
the search:” then click the “Browse” button.
9. Use the “Browse” function to locate the folder with the drivers and when you have
highlighted that folder click the “OK” button.
10. With the path to the location of the driver files showing in the small text box next to the
“Browse” button click NEXT.
11. When Windows has completed the installation the driver click “Finish” to close the Wizard.