ActionTec USB Wireless Adapter 802UI3(b) User manual

802UI3(b) Wireless USB Driver Installation Instructions
802UI3(b) Wireless USB Driver Installation Instructions
1. When the driver download be ins, select "Save" when prompted to either "Run" or Save".
2. When choosin where the file will be saved, be sure to select a familiar location, like My
Documents or the Desktop. This way when the download has finished, the file(s) is easy to
find.
3. The driver download is a Self-Extractin ZIP file. Start it like you would any application.
4. Users with XP may be prompted to “Run” or “Cancel”, select “Run”. After selectin “Run”,
the pro ram will prepare to install the drivers on the computer. The default location can be
chan ed, but if it is left at the default, the pro ram will create a folder and install all of the
drivers into that folder. The default behavior is to create the folder in the same location as
the pro ram it self. So the folder will be in the same location as the downloaded file, makin
it easy to find.
5. Power up the Windows computer and connect the Wireless USB Adapter.
6. This will cause the Hardware Wizard to open, if prompted to use Windows Update, select
“No, not this time.”, and click NEXT.
7. It is very unlikely that Windows would be able to locate the driver on its own, so select
“Install from a List or Specific Location (Advanced)”, and click NEXT.
8. Choose “Search for the best driver in these locations.” for Windows to search. Deselect
“Search Removable Media (floppy, CD-ROM…) and instead select “Include this location in
the search:” then click the “Browse” button.
9. Use the “Browse” function to locate the folder with the drivers, and when you have
hi hli hted that folder, click the “OK” button.
10. With the path to the location of the driver files showin in the small text box next to the
“Browse” button, click NEXT.
11. When Windows has completed the installation the driver, click “Finish” to close the Wizard.