ADAPT LOGGERS KELVIN S100 User manual

KELVIN | SINGLE-USE CELLULAR
CONNECTED TEMPERATURE
DATALOGGER WITH LCD DISPLAY
USER MANUAL
Product Overview
Operational Overview
Product Anatomy
Adapt’s flagship product designed and built to escort critically sensitive pharmaceutical
products. A true end-to-end cold chain solution for monitoring live assets travelling by
road or air. Include Kelvin while packing, and monitor your air cargo consignments with
Zero Human Intervention.
KELVIN S100
docs.adaptloggers.com/kelvins100
01.
02.
03.
04.
05.
LCD Screen
Button
QR Code
No Temperature Violation
Record Start
06.
07.
08.
09.
10.
Record End
Shock Notification
Location
Battery Charge Health
Cellular Network
11.
12.
13.
Degree Celsius
Temperature reading
Temperature Violation
For further queries, please drop a mail to inf[email protected]om or call us at [phone]
Charge Scan Pair Monitor
Configure
and assign
to asset
04
01
02
03
05 06 07 08 09 10
11
12
13
PAIR
Add the device to
a shipment.
CONFIGURE
Configure the datalogger
according to your requirement
using ADAPT’s platform.
TRACK
Track the shipment
on our platform

For detailed instructions on how to use the software, please visit
01
KELVIN S100
Status Request
Operational Instructions
docs.adaptloggers.com/kelvins100
Use the LCD display or scan
the QR on the device to
check the status of the
device. Make sure that the
device is not used.
04
Action to be
performed
Start recording
Stop recording
Download Report
Status request by single click of the button will have the following possibilities:
Only temperature.
No REC or END
Press 3 secs
Press 3 secs
Scan QR/Connect device
“REC” icon on LCD
“END” icon on LCD
Instruction
LCD display indication observed Status indicated
Confirmation Indication
05
Recording starts after precool-
ing delay period after starting
the trip. To check the status of
the device or alarms during
the trip, scan the QR or check
the display of the device.
02 03
Switch on the trip by
pressing the button for 3
secs. You should see “REC”
icon on the LCD display.
Place the device inside the
package
After the trip is started, there is a
preset precooling delay set for the
device. Temperature records during
this period are not included in the
trip report.
Press the button for 3 secs to
stop the trip. Scan the QR to
access the trip report.
REC blinking and delay interval shown
Static REC with bell icon
Static REC without bell
END blinking with bell
END blinking without bell
pre-rec mode
rec-delay mode
Recording mode and at least
one violation has been recorded
Recording mode and no
violation has been recorded
Recording ended and at least
one violation has been recorded.
Recording ended and no
violation has been recorded
www.adaptloggers.com+91-8639739890[email protected]om
single
click of
button