ADAPT LOGGERS PROTON S300 User manual

USER MANUAL
Product Overview
Operational Overview
Product Anatomy
USB Single Use Display Data loggers with visual alarms and ultra negative temperature
support. Get PDF and CSV reports at the end of the trip. Needs no additional software.
Integrated with electronics that work at -70 C. Rely on the ultra-cool Proton S300 with
temperature display for your pharma shipments.
PROTON S300
docs.adaptloggers.com/protons300
01.
02.
03.
04.
USB Connector
LCD Screen
Button
QR Code/Device ID
05.
06.
07.
Temperature Violation
Record Start
Record End
08.
09.
10.
Battery Charge Health
Degree Celsius
Temperature Reading
Charge Scan Pair Monitor
Configure
and assign
to asset
01
PLACE
Place the device
in your shipment.
04
GET REPORT
Press the button for 3 seconds
to end the trip, and connect
through USB to get trip report.
Temperature
Humidity
Temperature
Humidity
%
START
Press the button for 3
seconds to start.
For further queries, please drop a mail to inf[email protected]om or call us at [phone]
PROTON | RELIABLE SINGLE USE
ULTRA-NEGATIVE TEMPERATURE
DATALOGGER WITH LCD DISPLAY
05 06 07 08
09
10
02
03

For detailed instructions on how to use the software, please visit
01
PROTON S300
Status Request
Operational Instructions
Action Required
Start recording
Stop recording
Download report
Status request by single click of the button will have the following possibilities:
Only temperature shown.
No REC or END on LCD
Press 3 secs
Press 3 secs
Scan QR/Connect
device through USB
“REC” icon on LCD
“END” icon on LCD
Instruction
LCD display indication observed Status indicated
Confirmation Indication
04
“REC” stops blinking and
becomes solid after the
pre-cooling period. Solid REC
icon indicates that the device
is recording the temperature.
02 03
Press the button for 3 secs to start the
trip. A blinking “REC” on LCD screen
indicates the start of the trip. Place
the device in the package.
The trip recording starts
only after 30 mins from the
start of the trip. This is the
default preset pre-cooling
period. The trip cannot be
stopped during this
pre-cooling period
05
Press the button for 3 secs to
stop the trip. The LCD screen
shows “END” to indicate that
the trip has been ended.
06
Connect the USB of the data
logger to a PC to access the
PDF and CSV reports.
REC blinking
Static REC with bell icon
Static REC without bell icon
END blinking without bell icon
END blinking with bell
pre-rec mode
REC-delay mode
Recording mode and at least one
violation has been recorded
Recording mode and no
violation has been recorded
Recording ended and at
least one violation has been
recorded.
Recording ended and no
violation has been recorded.
www.adaptloggers.com+91-8639739890[email protected]om
single
click of
button
02
docs.adaptloggers.com/protons300
Click the button and check
the LCD Screen. If you see
“REC” or “END“ on the
screen, the device is used.