ADAPT LOGGERS KELVIN M300 User manual

KELVIN | MULTI-USE CELLULAR
CONNECTED TEMPERATURE
DATALOGGER WITH LCD DISPLAY
AND PROBE
USER MANUAL
Product Overview
Operational Overview
Product Anatomy
Adapt’s feature-packed flagship product designed and built to escort critically sensitive
pharmaceutical products. A true end-to-end cold chain solution for monitoring live assets
travelling by road or air. Include Kelvin while packing, and monitor your air cargo
consignments with Zero Human Intervention.
KELVIN M300
docs.adaptloggers.com/kelvinm300
01.
02.
03.
LCD Screen
Button
QR Code
04.
05.
Probe
USB Type C Connector
06.
07.
08.
09.
10.
No Temperature Violation
Record Start
Record End
Shock Notification
Battery Charge Health
11.
12.
13.
14.
15.
16.
Cellular Network
WiFi Network
Degree Celsius
Temperature Reading
Temperature Violation
Max/Avg/Min reading indication
01
02
03
16
06 07 08 09 10 11 12
13
14
15
04
For further queries, please drop a mail to inf[email protected]om or call us at [phone]
Charge Scan Pair Monitor
Configure
and assign
to asset
PAIR
Add the device to
a shipment.
CONFIGURE
Configure the datalogger
according to your requirement
using ADAPT’s platform.
TRACK
Track the shipment
on our platform

For detailed instructions on how to use the software, please visit
01
KELVIN M300
Status Request
Operational Instructions
docs.adaptloggers.com/kelvinm300
Charge the device to
100% battery. You will
see the red charging
LED turn green.
04
Action to be
performed
Start recording
Stop recording
Downloading
Status request by single click of the button will have the following possibilities:
Only temperature. No REC or END
Press 3 secs
Press 3 secs
Scan QR/Connect device
“REC” icon on LCD
“END” icon on LCD
END starts blinking
Instruction
LCD display indication observed Status indicated
Confirmation Indication
05 06
Switch on the trip by pressing
the button for 3 secs. You
should see “REC” icon on the
LCD display. Place the probe
inside the package.
02 03
Disconnect the charger and
attach the Probe to the
USB-C port.
Use the LCD Display or scan
the QR on the device to check
the status of the device. Make
sure that the status is not
“paired”.
After the trip is started, there
is a preset precooling delay
set for the device. Tempera-
ture records during this
period are not included in the
trip report.
Recording starts after precool-
ing delay period after starting
the trip. To check the status of
the device or alarms during the
trip, scan the QR or check the
display of the device
07
Press the button for 3 secs to
stop the trip. Scan the QR to
access the trip report
REC blinking and delay interval shown
Static REC with bell icon
Static REC without bell
END blinking with bell
END blinking without bell
pre-rec mode
rec-delay mode
Recording mode and
at least one violation has
been recorded
Recording ended and no
violation has been recorded
Recording ended and at
least one violation has been
recorded.
Recording ended and no
violation has been recorded
www.adaptloggers.com+91-8639739890[email protected]om
single
click of
button