ADAPT LOGGERS KELVIN M200 User manual

KELVIN | MULTI-USE CELLULAR
CONNECTED TEMPERATURE
DATALOGGER WITH LCD DISPLAY
USER MANUAL
Product Overview
Operational Overview
Product Anatomy
Adapt’s feature-packed flagship product designed and built to escort critically sensitive
pharmaceutical products. A true end-to-end cold chain solution for monitoring live assets
travelling by road or air. Include Kelvin while packing, and monitor your air cargo
consignments with Zero Human Intervention.
KELVIN M200
docs.adaptloggers.com/kelvinm200
01.
02.
03.
04.
05.
LCD Screen
Button
QR Code
No Temperature Violation
Record Start
06.
07.
08.
09.
10.
Record End
Shock Notification
Battery Charge Health
Cellular Network
WiFi Network
11.
12.
13.
14.
Degree Celsius
Temperature reading (in Deg Cel)
Temperature Violation Thresholds
Temperature Violation Indication Icon
For further queries, please drop a mail to inf[email protected]om or call us at [phone]
Charge Scan Pair Monitor
Configure
and assign
to asset
04
01
02
03
05 06 07 08 09 10
11
12
13
14
PAIR
Add the device to
a shipment.
CONFIGURE
Configure the datalogger
according to your requirement
using ADAPT’s platform.
TRACK
Track the shipment
on our platform

For detailed instructions on how to use the software, please visit
01
KELVIN M200
Status Request
Operational Instructions
docs.adaptloggers.com/kelvinm200
Charge the device to
100% battery. You will
see the red charging
LED turn green.
04
Action to be
performed
Start recording
Stop recording
Downloading
Status request by single click of the button will have the following possibilities:
Only temperature. No REC or END
Press 3 secs
Press 3 secs
Scan QR/Connect device
“REC” icon on LCD
“END” icon on LCD
END starts blinking
Instruction
LCD display indication observed Status indicated
Confirmation Indication
05 6
After the trip is started, there is
a preset precooling delay set
for the device. Temperature
records during this period are
not included in the trip report.
02 03
Use the LCD display or
scan the QR on the device
to check the status of the
device. Make sure that the
status is not “paired”.
Switch on the trip by
pressing the button for 3
secs. You should see “REC”
icon on the LCD display.
Place the device inside the
package
Recording starts after
precooling delay period after
starting the trip. To check the
status of the device or alarms
during the trip, scan the QR
or check the display of the
Press the button for 3 secs to
stop the trip. Scan the QR to
access the trip report.
REC blinking and delay interval shown
Static REC with bell icon
Static REC without bell
END blinking with bell
END blinking without bell
pre-rec mode
rec-delay mode
Recording mode and
at least one violation has
been recorded
Recording ended and no
violation has been recorded
Recording ended and at
least one violation has been
recorded.
Recording ended and no
violation has been recorded
www.adaptloggers.com+91-8639739890[email protected]om
single
click of
button