Adaptec 7210S Use and care manual

Adaptec DuraStor 7210S LUN ZONING Replacement Process
In order to take advantage of the enhanced features now available on the DuraStor
7220SS Storage Subsystem it may be necessary to exchange your controller for an
upgraded version. These enhancements are being offered as a complementary
upgrade to Adaptec customers.
To assess whether your controller card qualifies for the free upgrade you will need to
check the revision of the controller card. A sticker on the middle of the board identifies
the updated controller as REV: E (see figure below).
If your DuraStor 7210S controller is version prior to REV: E, then you will be able to
take advantage of this free enhancement program by contacting technical support and
Adaptec will send you the latest version of the controller with the enhancement pre-
loaded.
Updates to DuraStor controller firmware are made available on the Adaptec support
website. The LUN Zoning feature is introduced in firmware version V100B06.
Customers with REV: E hardware can update controllers with the latest firmware on the
Adaptec support website.
F igure 1. Hardware Revision Label
ADS-7200S
128MB
P/N: 1967200
REV: E
YYWW
All controllers shipped in the 7320SS enclosures have this enhanced version of the
firmware, as standard from Adaptec. Any future updates to the firmware on these
controllers can be done by downloading updates that will be posted (when available)
on the Adaptec support web site and flashing the controller firmware.