Adaptec ANA-6922A User manual

ADAPTEC DUO
10/100 FAST ETHERNET
Two-port ANA™-6922A PCI server adapter for
Fast Ethernet environments
™
®
Product Highlights
■Two connectors supporting
separate network segments
at full-link bandwidth
■Optimized for Pentium, and
Pentium Pro servers
■Each channel operates
at independent speeds
for maximum flexibility
(10 Mbps, 20 Mbps,
100 Mbps, or 200 Mbps)
■Full Duplex Fast Ethernet, for up
to 400 Mbps throughput
■NWay auto-negotiation of
maximum line speed
R
Overview
As network traffic continues to increase,
servers are hard-pressed to keep up with
the demand. The Adaptec Duo adapter
provides an efficient,cost-effective way to
scale bandwidth for PCI servers operating
on Fast Ethernet networks.
The ANA-6922A Duo adapter provides
two channels on a single board and Full
Duplex Fast Ethernet (FDFE) to deliver up
to 400 Mbps of cumulative throughput.
Each channel is capable of operating inde-
pendently at speeds ranging from 10 Mbps
to 200 Mbps. This enables the Adaptec
Duo adapter to accommodate a broad
spectrum of applications from graphics to
multimedia.
Further, because this 2-port adapter fills
only one PCI slot, the other slots remain
available for SCSI devices, RAID cards, or
additional network adapters—offering flexi-
bility and allowing servers to efficiently
meet changing requirements.
Key Features and Benefits
Scalability
The Adaptec Duo adapter addresses the
need to scale network bandwidth without
replacing or adding additional servers.
Connected to a single PCI slot on a server,
this adapter provides the equivalent of two
Fast Ethernet segments over one board—
at less than the cost of two separate single-
port adapters.
Full duplex mode
Full Duplex Fast Ethernet and Full Duplex
Ethernet (FDE) capabilities double the
cumulative system throughput, resulting in
up to 400 Mbps of total throughput (200
Mbps in each direction). Servers using the
Adpatec Duo adapter can handle, receive,
and transmit requests simultaneously over
both ports, so workstations benefit from
greater network performance.
Designed for performance
The ANA-6922A Duo adapter has been
certified for use in high-performance
Pentium Pro systems, using Digital’s latest
bridge technology to deliver superior PCI
2.1 functionality. The adapter’s efficient
bus design further enhances throughput by
minimizing CPU involvement in data han-
dling activities. Independent transmit and
receive FIFO (First In, First Out) buffers
for each of the two ports ensure consistently
superior performance, even during peak
network usage.
Flexible configuration
The Adaptec Duo adapter supports both
attached network segments at full link
bandwidth. Each channel is automatically
configured by the system. NWay auto-
negotiation allows the adapter to detect the
network’s maximum line speed and adjust
channels accordingly. For maximum flexi-
bility, this feature is compatible with all
10 Mbps and 100 Mbps devices, including
those without NWay line speed negotiation.
Duralink™ software enabled
Adaptec’s 10/100 PCI adapters are enabled
to work with Adaptec’s innovative Duralink
suite of software. This suite includes
Duralink Failover and Duralink Port
Aggregation. Duralink Failover establishes
an FDDI-like port resiliency with both
active and hot-standby links. In the event
that the active link fails,the standby link
is automatically activated to preserve the
network link and maintain the server’s
availability. Duralink Manager, included
with the adapter, is a data compilation tool
that simplifies adapter monitoring and
configuration. Duralink Port Aggregation
software lets users aggregate up to 12 ports
per workgroup for speeds up to 1.2 Gigabits
per second.

Adaptec, Inc.
691 South Milpitas Boulevard
Milpitas, California 95035
Tel: [phone]
Fax: [phone]
Adaptec Europe - Belgium
Tel: [phone]
Fax: [phone]
Adaptec Japan - Tokyo
Tel: [phone]
Fax: [phone]
Adaptec Singapore
Tel: [phone]
Fax: [phone]
Literature:
1-800-934-2766 (USA and Canada)
or [phone]
Pre-Sales Support:
1-800-442-7274 (USA and Canada)
or [phone]
World Wide Web:
www.adaptec.com
Internet ftp server: ftp.adaptec.com
Adaptec USA Bulletin Board
Service (BBS): [phone]
(up to 28,800 baud, using 8 bits,
1 stop bit, no parity)
Interactive Fax: [phone]
Copyright 1997 Adaptec, Inc. All rights reserved.
Adaptec, the Adaptec logo, the Adaptec tagline,
ANA, Duralink, and Duo are trademarks of
Adaptec, Inc., which may be registered in some
jurisdictions. All other trademarks used are owned
by their respective owners.
Information supplied by Adaptec, Inc. is believed to
be accurate and reliable at the time of printing, but
Adaptec, Inc. assumes no responsibility for any
errors that may appear in this document. Adaptec,
Inc. reserves the right, without notice, to make
changes in product design or specifications.
Information is subject to change without notice.
P/N 960329-011 Printed in U.S.A. 12/97
Technical Specifications
Systems supported: PCI Local Bus systems based on Intel,DEC Alpha,
MIPS, and PowerPC processors
Bus interface: PCI, 32-bit bus master (PCI 2.1)
Ethernet controller: DECchip LAN coprocessor chip (2)
FIFO buffer memory: 4 KBytes transmit, 8 KBytes receive per port
Hardware interrupts: PCI interrupt A, supports shared interrupts
Base IO or memory address: Assigned by BIOS
PCI configuration space: Supports DWORD,WORD, and BYTE access
Power requirements: +5 volts @ 3.5 Amp. max.
Environmental operating range: Temperature: 0ºC to 50ºC
Relative humidity: 5% to 85% non-condensing
Altitude: 3000m max.
Interface connections: • RJ-45 female (2)
• Supports CAT 3,4, and 5 UTP and Type 1 STP
for 10BASE-T operation
• CAT 5 UTP and Type 1 STP for 100BASE-TX operation
• Full Duplex support on all RJ-45 connectors for 10BASE-T
and 100BASE-TX operation
Dimensions: 12”x 4.2”to conform to PCI Long Card specifications
Standards compliance: IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
FCC Class B
CE Class B
Drivers available: 3.5”diskette - Novell NetWare 3.x,4.x, and coexistance in
SFT III environments,Windows NT® for Intel,FTP, Duralink
for NetWare and Windows NT servers. Supports Adaptec’s
Duralink software. The following drivers will be available in
Q1 1998: DECAlpha platforms,SCO OpenServer,SCOUnixWare
Mean time between failure: Calculated MTBF>100,000 hours
Warranty: Adaptec’s Fast Ethernet adapters are protected by a limited
lifetime warranty
R
ADAPTEC DUO
10/100 FAST ETHERNET