ADC RF Signal Management SignalOn Series User manual

www.adc.com • [phone] • 1-800-366-3891
Spec Sheet
SignalOn®Series
RF Signal Management
Advanced broadband services are being developed and launched at an ever-accelerating
pace. While these services vary, they have one thing in common. Whether it be high-speed
data, video-on-demand, or IP telephony, broadband subscribers expect a reliable, high-quality
experience at an affordable price.
ADC’s SignalOn®Series has been designed with these demanding service requirements in mind.
This next generation RF signal management platform provides unmatched density, RF performance,
and reliability—all at a competitive price. With its patented hitless “make-before-break” attenuator
circuit design, maintaining your RF signal network has never been easier.

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
2
www.adc.com • [phone] • 1-800-366-3891
freq
dB
Broadband CATV RF Spectrum
VOD servers
Network
diagnostics/test gear
QPSK set-top
control network
CMTS for
HSD, VoIP
Fiber plant
from subscribers
S
C
A
C = Combiner
S = Splitter
A = Amplifier
S
S
S
A
A
A
Fiber outside plant
to subscribers
L-Band
Satellite
Splitters
VOD servers
dB
freq
Broadband CATV RF Spectrum
Receivers
processors
modulators
CMTS for
HSD, VoIP
QAM
modulators
RFSM
Amplifiers
RFSM
Splitter
Redundant Amplifiers
with RF Switch
IRD Receiver
IRD Receiver
IRD Receiver
IRD Receiver
IRD Receiver
IRD Receiver
IRD Receiver
IRD Receiver
C
C
C
S
S
S
S
S
C
C
C
C
S
A
A
A
A
A
S
A
A
C = Combiner
S = Splitter
A = Amplifier
Typical Downstream Configuration
Typical Upstream Configuration

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
3
www.adc.com • [phone] • 1-800-366-3891
Type
32D 32-position, Drawer
20V 20-position, Vertical
08H 8-position, Horizontal
04H 4-position, Horizontal
02H 2-position, Horizontal
Catalog Number
N - C __ __ __ __ B
Power Kit
N No
Y Yes*
Chassis
Description Catalog Number
Passive Chassis
32-position high-density chassis, 4 RU, black N-C32DNB
20-position chassis, 5 RU, black N-C20VNB
20-position chassis, 5 RU, NEBS N-C20VN-NEBS
8-position chassis, 2 RU, black N-C08HNB
8-position reversible chassis, 2 RU, black N-C08HNB-R
4-position chassis, 1 RU, black N-C04HNB
2-position chassis, 1 RU, black N-C02HNB
Active Chassis
20-position powered chassis, 5 RU, black N-C20VYB
20-position powered chassis, 5 RU, NEBS N-C20VY-NEBS
8-position powered chassis, 2 RU, black N-C08HYB
Ordering Information
20-Position, 5 RU Chassis
8-Position, 2 RU Chassis
4-Position, 1 RU Chassis
2-Position, 1 RU Chassis
* 20 and 8-position only
32-Position, 4 RU Drawer

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
4
www.adc.com • [phone] • 1-800-366-3891
Plain Splitter/Combiner
Module
Pad and Monitor Module
with Make-Before-Break
Attenuation
Passives:
RF Splitter/Combiner Modules
5 MHz to 1 GHz
Features
Industry's highest density with standard F•
and BNC connectors
Industry's best performance and specifications•
Individual performance certificate shipped•
with every module
Patented make-before-break attenuator pad•
design for hitless signal balancing
Chassis supports both passive and active•
modules
Clear chassis door provides protection and•
clear view of modules
Clear attenuator pad covers and patented•
pad guides for simplified maintenance
High quality, precision F or BNC connectors•
Designed to exceed NEBS requirements for •
grounding/bonding
Independent EMI near and far-field testing•
Ten year warranty on all passive modules•
Available in 1 RU, 2 RU, 4 RU and 5 RU chassis•
NEBS Level 3 compliant•
Module Type
P Plain splitter/
combiner
C Combiner with
pad/monitor
S Splitter with pad/
monitor
X Splitter and
combiner with
pad/monitor (2 x
4:1 module only)
Catalog Number
N - M __ __ __ __ __ __
Make-Before-Break
Attenuation**
M0 0 dB default
M6 6 dB default
Connector Type
F F
B BNC
*3 x 2:1 and 2 x 4:1 housed in a single module.
**Leave last two digits blank for plain modules.
Configuration
12 2:1
14 4:1
18 8:1
32 3 x 2:1*
24 2 x 4:1*
Selection of default pad option for pand and monitor modules
The make before break attenuation feature requires that a default attenuation padding value be chosen
for the module. The two options are:
M0 – 0 dB loss on the splitter or combiner leg when attenuator pad is removed
The M0 option is used in systems where the attenuator pad values will range from 0 dB to 10 dB.
M6 – 6 dB loss on the splitter or combiner leg when attenuator pad is removed
The M6 option is typically used in systems where the attenuator pad values range from 10 dB to
25 dB. In this situation, the additional 6 dB of loss that is placed in line when the pad is removed
will help to limit overdriving active devices further downstream and will help limit transmitter laser
clipping, and overdriving of RF amplifiers in the distribution plant.
Passives: Introduction
The SignalOn®Series, combined with the
innovative cable management of the chassis,
provides engineers with a variety of products to
simplify the RF signal management challenge.

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
5
www.adc.com • [phone] • 1-800-366-3891
Ordering Information
Description Catalog Number
Plain Splitter/Combiner Modules
BNC connector 2:1 plain N-MPB12
4:1 plain N-MPB14
8:1 plain N-MPB18
3 x 2:1 plain N-MPB32
2 x 4:1 plain N-MPB24
F connector 2:1 plain N-MPF12
4:1 plain N-MPF14
8:1 plain N-MPF18
3 x 2:1 plain N-MPF32
2 x 4:1 plain N-MPF24
BNC connector 0 dB default 2:1 combiner with monitor N-MCB12M0
2:1 splitter with monitor N-MSB12M0
2x4:1 combiner with monitor N-MCB24M0
2x4:1 splitter with monitor N-MSB24M0
2x4:1 splitter/combiner with monitor N-MXB24M0
3x2:1 combiner with monitor N-MCB32M0
3x2:1 splitter with monitor N-MSB32M0
4:1 combiner with monitor N-MCB14M0
4:1 splitter with monitor N-MSB14M0
8:1 combiner with monitor N-MCB18M0
8:1 splitter with monitor N-MSB18M0
6 dB default 2:1 combiner with monitor N-MCB12M6
2:1 splitter with monitor N-MSB12M6
2x4:1 combiner with monitor N-MCB24M6
2x4:1 splitter with monitor N-MSB24M6
2x4:1 splitter/combiner with monitor N-MXB24M6
3x2:1 combiner with monitor N-MCB32M6
3x2:1 splitter with monitor N-MSB32M6
4:1 combiner with monitor N-MCB14M6
4:1 splitter with monitor N-MSB14M6
8:1 combiner with monitor N-MCB18M6
8:1 splitter with monitor N-MSB18M6

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
6
www.adc.com • [phone] • 1-800-366-3891
Description Catalog Number
Splitter/Combiner with Pad and Monitor Modules
F connector 0 dB default 2:1 combiner with monitor N-MCF12M0
2:1 splitter with monitor N-MSF12M0
2x4:1 combiner with monitor N-MCF24M0
2x4:1 splitter with monitor N-MSF24M0
2x4:1 splitter/combiner with monitor N-MXF24M0
3x2:1 combiner with monitor N-MCF32M0
3x2:1 splitter with monitor N-MSF32M0
4:1 combiner with monitor N-MCF14M0
4:1 splitter with monitor N-MSF14M0
8:1 combiner with monitor N-MCF18M0
8:1 splitter with monitor N-MSF18M0
6 dB default 2:1 combiner with monitor N-MCF12M6
2:1 splitter with monitor N-MSF12M6
2x4:1 combiner with monitor N-MCF24M6
2x4:1 splitter with monitor N-MSF24M6
2x4:1 splitter/combiner with monitor N-MXF24M6
3x2:1 combiner with monitor N-MCF32M6
3x2:1 splitter with monitor N-MSF32M6
4:1 combiner with monitor N-MCF14M6
4:1 splitter with monitor N-MSF14M6
8:1 combiner with monitor N-MCF18M6
8:1 splitter with monitor N-MSF18M6
Ordering Information

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
7
www.adc.com • [phone] • 1-800-366-3891
Connector Type
F F
B BNC
Catalog Number
N - MD __ __ __ __ __
Application Type
R Rear narrowcast signal port
DC Value
09 9 dB
12 12 dB
20 20 dB
V12 12 dB variable
Circuit Quantity
1Single circuit
3 Triple circuit
Ordering Information
Passives:
Directional Coupler Modules
5 MHz to 1 GHz
Description Catalog Number
Directional Coupler Modules
BNC connector 9 dB Triple circuit N-MDB309R
12 dB Single circuit N-MDB112R
Triple circuit N-MDB312R
6x variable N-MDB6V12R
20 dB Single circuit N-MDB120R
Triple circuit N-MDB320R
F connector 9 dB Triple circuit N-MDF309R
12 dB Single circuit N-MDF112R
Triple circuit N-MDF312R
6x variable N-MDF6V12R
20 dB Single circuit N-MDF120R
Triple circuit N-MDF320R
Directional Coupler

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
8
www.adc.com • [phone] • 1-800-366-3891
Features
Typically placed at the input to the forward•
path optical transmitter, this module allows
for conditioning and grooming of the RF
signal gain and slope. It is designed as 1:1
input to output with two MBB circuits in
series for pad and EQ placement.
-20 dB front facing monitor port•
NEBS Level 3 compliant• Triple C & M
F-Connectors
Passives: Conditioning and Monitor Modules
Description Catalog Number
Conditioning and Monitor Modules; triple circuit, 20 dB, 0 dB default
BNC connector N-MMB320FM0
F connector N-MMF320FM0
Ordering Information
Conditioning and monitor module schematic
-20 dB
(monitor)
Attenuation
Pad
Equalization
(EQ) Pad
In Out

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
9
www.adc.com • [phone] • 1-800-366-3891
Passives: L-Band Satellite Splitter Modules
950 MHz to 2.15 GHz
ADC’s new L-Band series satellite splitter modules are engineered for the highest performance in
the 950 MHz to 2.15 GHz frequency range. These plain splitter/combiner modules feature dual port
power-passing capability for powering LNB’s. All L-Band modules are available with precision F
or BNC connectors, and are NEBS Level 3 compliant.
Connector Type
F F
B BNC
Catalog Number
N - ML __ __ __
Configuration
12 2:1
14 4:1
18 8:1
32 3 x 2:1*
24 2 x 4:1*
*Housed in a single module.
Ordering Information
L-Band
Satellite Splitter
Description Catalog Number
L-Band Satellite Splitter Modules
BNC connector 2:1 splitter N-MLB12
4:1 splitter N-MLB14
8:1 splitter N-MLB18
3x2:1 splitter N-MLB32
2x4:1 splitter N-MLB24
F connector 2:1 splitter N-MLF12
4:1 splitter N-MLF14
8:1 splitter N-MLF18
3x2:1 splitter N-MLF32
2x4:1 splitter N-MLF24
All L-Band modules feature dual port power passing capability.
Pass
Pass
Pass
Pass
Pass
Pass
2-Way Splitter 4-Way Splitter
8-Way Splitter
1
2
3
4
1
2
1
2
3
4
5
6
7
8

5/08 • 102721AE SignalOn®Series
10
www.adc.com • [phone] • 1-800-366-3891
SignalOn®Series
RF Signal Management
Today’s broadband services require high-quality
headend infrastructure that offers excellent
performance, reliability and design flexibility.
Furthermore, your infrastructure solution should
maximize the uptime of carrier-class services like
VoIP, VOD and HSD as applications evolve and
your network changes.
Leveraging over a decade of RF amplifier design
experience, ADC’s SignalOn®amplifiers have been
engineered to meet these demanding service
requirements. Featuring operation from 50 MHz to
1 GHz, the amplifiers offer excellent performance
and reliability. SignalOn amplifiers and associated
power supplies can be housed in the same chassis
as the SignalOn passive products for increased
design flexibility. With its electronically variable gain
and slope controls, you can adjust signal levels in
your network with no service downtime.
SignalOn amplifiers feature non-service-affecting
gain and slope controls. This capability along with
the patented make-before-break attenuator pad
design of the splitters and combiners, allow for
"hitless" RF signal adjustment—critical for today's
carrier-class broadband service applications.
Amplifier
(front view)
20-Position, 5 RU Powered Chassis
(with mixture of passive
and active modules)
20-Position, 5 RU Powered Chassis
(rear view)
8-Position, 2 RU Powered Chassis
(front view)
8-Position, 2 RU Powered Chassis
(rear view)
Features
Operation from 50 MHz to 1 GHz •
GaAs technology with near-100% surface •
mount design for high performance
Meets MIL-202 specs for quality and reliability•
Mounts in same SignalOn chassis as passive•
modules for maximum design flexibility
Digitally variable gain and slope control for•
non-service-affecting signal level adjustments
20 dB monitor points on both input and •
output signals for testing and troubleshooting
"Blind-mate" power bus connector with •
gold-on-gold contacts; requires no cabling
Chassis-mounted AC-DC and DC-DC power•
supply options
Redundant powering with dual load shared•
power supplies for increased availability
External +24 Vdc powering option•
NEBS Level 3 compliant•
Actives: Introduction

5/08 • 102721AE SignalOn®Series
11
www.adc.com • [phone] • 1-800-366-3891
SignalOn®Series
Actives: Forward Path Amplifier
Actives: Amplifier Modules
Amplifier
(front view)
PERFORMANCE ATTRIBUTE 20 dB Forward Amplifier 30 dB Forward Amplifier
Bandwidth 50-1000 MHz 50-1000 MHz
Optimum RF input +20 dBmV per channel +10 dBmV per channel
Minimum full gain 20.0 dB 30.0 dB
Gain adjustment range 10 +/-1 dB in 0.5 dB steps 10 +/-1 dB in 0.5 dB steps
Tilt adjustment range 10 +/-1 dB @ 50 MHz in 0.5 dB steps 10 +/-1 dB @ 50 MHz in 0.5 dB steps
Gain flatness +/- 0.4 dB from 50 to 870 MHz
+/- 0.5 dB from 870 to 1000 MHz
+/- 0.45 dB from 50 to 870 MHz
+/- 0.65 dB from 870 to 1000 MHz
Return loss,
input and output ports
-19.0 dB from 50 to 870 MHz
-16.5 dB from 870 to 1000 MHz
-18.0 dB from 50 to 870 MHz
-15.0 dB from 870 to 1000 MHz
Noise figure 7.3 dB from 50 to 870 MHz
7.6 dB from 870 to 1000 MHz
5.7 dB from 50 to 870 MHz
6.2 dB from 870 to 1000 MHz
CTB1 -73.1 dB -78.9 dB
CSO1 -81.7 dB -84.5 dB
IMD1 -78.2 dB -83.7 dB
Monitor ports -20 dB test point for both RF input and RF output
Power dissipation 17W max
Operating temperature 0 - 50 degrees C
Dimensions 8.55"H x 1.67"W x 7.81"D
Power connector gold-on-gold, slide-on contacts
Thermal shock Meets MIL-STD-202 Method 107
Office vibration Meets GR-63-Core Section 5.4.2
Mechanical shock Meets MIL-STD-202 Method 213
Accelerated aging Meets MIL-STD-202 Method 108
NEBS Meets NEBS Level 3
Ordering Information
Description Catalog Number
Forward Path Amplifier Modules
BNC connector 20 dB N-MAB20FA
30 dB N-MAB30FA
F connector 20 dB N-MAF20FA
30 dB N-MAF30FA
Note: Measured with 110 channel loading and optimum RF input level at full gain and no tilt. Specications are typical
worst-case numbers across the given frequency range, unless otherwise noted, and are subject to change without notice.

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
12
www.adc.com • [phone] • 1-800-366-3891
Actives: Power Supply Modules
Specifications
PERFORMANCE ATTRIBUTE AC-DC DC-DC
Input voltage 90-264 Vac, 50/60 Hz 36-72 Vdc nominal
Efficiency 75% nominal 80% nominal
Output voltage 24 Vdc ± 5% 24 Vdc ± 5%
Output power 200W (24 Vdc @ 8.33 Amps) 192W (24 Vdc @ 8 Amps)
Amplifiers supported Up to nine 30 dB ampliers Up to nine 30 dB ampliers
Redundancy Yes, dual load sharing Yes, dual load sharing
Operating temperature 0 - 50° C 0 - 50° C
Dimensions 8.55"H x 1.67"W x 12.96"D 8.55"H x 1.67"W x 12.96"D
Power connector gold-on-gold, slide-on contacts gold-on-gold, slide-on contacts
Test points 24 Vdc output test points 24 Vdc output test points
Fan Field replaceable unit Field replaceable unit
Alarm relays Fan fail, output power fail Fan fail, output power fail
TTL contacts Remote inhibit, input power
fail, output power fail
Remote inhibit, input power
fail, output power fail
NEBS Meets NEBS Level 3 Meets NEBS Level 3
Description Catalog Number
Power Supply Modules
AC to DC N-MVUVAC
DC to DC N-MV48DC
Ordering Information
Power Supply
(front view)

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
13
www.adc.com • [phone] • 1-800-366-3891
The ADC SignalOn® RF Switch Module (RFSM) is designed for use with the
SignalOn 8-position, or 20-position powered chassis. All RF connections to the
switch are made through standard 75 W BNC, or F connectors on the rear of the
module. All operating controls and indicators are located on the front panel with
configuration controls located on the rear of the module.
The primary function of the module is to monitor the RF signal gain of the operating
primary “A“ input, and switch to the backup “B“ input if the gain of the primary
path rises, or falls below the pre-set customer selected threshold. Should the “A“
input side go above, or fall below the threshold of the unit, the RFSM will rapidly
switch the input from the failed input to the secondary input. This switch usually
is less that 10 milliseconds. Switch status, failure LEDS, and RF level bar graphs are
mounted on the front panel of the switch module. Switching threshold: +/- 3 dB or
+/- 6 dB, and alarm contact closures are located on the rear of module.
Dual RF Switch
Module
Actives: RF Switch Modules
Features
Continuous monitoring of primary and secondary•
Detects both high and low power failures•
User-selectable switching threshold: •
+/- 3 dB or +/- 6 dB
Fail-over switching time < 10 ms•
Automatic switchback after "A" path is restored•
Front-panel LED status and dual power •
level displays
Alarm contact for remote failure monitoring•
Available in BNC and F-connector configurations•
Single or dual modules•
Easily configured for redundancy or A-B •
switch applications
Front panel bar graph display provides indication•
of RF power and switching threshold
Indication of switch status provided by front•
panel LED and rear terminal block contacts
Easily configured switching threshold levels via •
rear DIP switch
One-step calibration•
Auto switch-back feature to primary input•
Built-in delay to prevent from false switching•
Automatic or manual modes of operation•
NEBS Level 3 compliant•
Ordering Information
Description Catalog Number
Redundant RF Switch Modules
BNC connector Single circuit N-MRFSM1-B
Dual circuit N-MRFSM2-B
F connector Single circuit N-MRFSM1-F
Dual circuit N-MRFSM2-F

5/08 • 102721AE SignalOn®Series
SignalOn®Series
RF Signal Management
14
www.adc.com • [phone] • 1-800-366-3891
ADC’s Return Path Amplifier was designed
specifically to solve problems particular to your
environment. Providing greater density, unparalleled
cable management, greater functionality and
redundant powering, the return path amplifier
is part of the system approach to integrating all
signal management functions in a common format
and modular system.
To mount modules in SignalOn chassis use these
amplifiers in conjunction with N-ACC-BRKT-RA
(mounts 1 or 2 amps) – see page 16.
Features
Fixed 22 dB •
Low distortion characteristics•
Low noise figure•
5-200 MHz bandwidth•
Two 20 dB monitor ports (input and output)•
BNC or F connectors•
AC or DC powering•
Power redundancy (optional)•
Reverse Path Amplifier
Actives: Reverse Path Amplifier Modules
Ordering Information
Description Dimensions (H x W x D) Catalog Number
Reverse Path Amplifier Modules
22 dB Fixed Gain
BNC connectors 57 mm x 31 mm x 203 mm
(2.25" x 1.2" x 8.0")
RFX-AMP-22B
F connectors RFX-AMP-22F

5/08 • 102721AE SignalOn®Series
15
www.adc.com • [phone] • 1-800-366-3891
SignalOn®Series
RF Signal Management
* Kit intended for 0 db default MBB modules (-M0 modules)
** Kit intended for 6 db default MBB modules (-M6 modules)
Accessories
Ordering Information
Description Catalog Number
Cable Management Kits; (includes rack mount cable management rings)
2 brackets, 2 – 2.5" x 5.5" cable rings N-ACMK-01P
4 brackets, 4 – 2.5" x 5.5" cable rings N-ACMK-04P
Chassis Extender Brackets for;
2-position chassis, 23" rack EB-17B
8-position chassis, 23" rack EB-35B
20-position chassis, ETSI 21" rack EB-87B
Insertion/Withdrawal Tools
BNC insertion tool with 12" handle BT2000-12
BNC insertion tool with 24" handle BT2000-24
F connector insertion tool SC-FG
Terminating Plugs
BNC terminating plug, 75 W ± 1.0% BNC-TP1
BNC high-performance terminating plug, 75 W ± .1% BNC-TP2
F terminating plug, 75 W ± 1.0% CF-TP1
F high-performance terminating plug, 75 W ± .1% CF-TP2
Attenuator Pads
XX dB pads, qty 25 (replace XX with 00 through 26) N-ACC-AP-XX
1-5 dB pads, 5 of each pad value, total qty 25 N-ACC-AP-S1
6-10 dB pads, 5 of each pad value, total qty 25 N-ACC-AP-S2
11-15 dB pads, 5 of each pad value, total qty 25 N-ACC-AP-S3
16-20 dB pads, 5 of each pad value, total qty 25 N-ACC-AP-S4
21-25 dB pads, 5 of each pad value, total qty 25 N-ACC-AP-S5
3,6,9,12,15 dB pads, 5 of each pad value, total qty 25* N-ACC-AP-M0
0,3,9,12,15 dB pads, 5 of each pad value, total qty 25** N-ACC-AP-M6
75 W termination pads, qty 25 N-ACC-TP-75
BNC Terminating Plugs
(BNC TP-1 and TP-2)
F Terminating Plugs
(CF TP-1 and TP-2)

Spec Sheet
Website: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: [phone]
Fax: [phone] • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
102721AE 5/08 Revision © 2008, 2006 ADC Telecommunications, Inc. All Rights Reserved
Description Catalog Number
Equalizer Pads
2 dB plug-in N-ACC-LE-02
3 dB plug-in N-ACC-LE-03
4 dB plug-in N-ACC-LE-04
5 dB plug-in N-ACC-LE-05
6 dB plug-in N-ACC-LE-06
7 dB plug-in N-ACC-LE-07
8 dB plug-in N-ACC-LE-08
9 dB plug-in N-ACC-LE-09
10 dB plug-in N-ACC-LE-10
11 dB plug-in N-ACC-LE-11
12 dB plug-in N-ACC-LE-12
13 dB plug-in N-ACC-LE-13
DC Power Upgrade Kits for;
2 RU chassis – used to power 8-position N-ACC-PWRKIT-08B
5 RU chassis – used to power 20-position N-ACC-PWRKIT-20B
Power Supply Accessories
Power cord for power supply N-ACC-CBL-DC-DC
Fan replacement kit for power supply N-ACC-FAN
Module Conversion Kits; to install
1 RF Worx®passive module into SignalOn®chassis N-ACC-BRKT-RFW
2 RF Worx®reverse amps into powered SignalOn®chassis N-ACC-BRKT-RA
1 SignalOn® passive module into MAXNET™chassis1N-AMCK-01
18 SignalOn® passive modules into MAXNET™chassis1N-AMCK-18
Blank Module Covers
Single blank panel cover N-ACC-BLANK-01
Dual blank panel cover N-ACC-BLANK-02
Bulkhead Testpoint Panels
Single panel with 2 F-81 bulkhead connectors N-MTPF2
Single panel with 2 F-81 bulkhead connectors N-MTPF6
Ordering Information
1 MAXNET is a trademark of ATX Networks
SignalOn®Series
Accessories