ADF Web HD67735-A1 User manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 1 of 28
User Manual
Revision 1.
English
IEC 61850 Server / Modbus TCP Master -
Converter
(Order Code: HD67735-A1 )
For Website information:
www.adfweb.com?Product=HD67735
For Price information:
www.adfweb.com?Price=HD67735-A1
Benefits and Main Features:
Very easy to configure
Triple Electrical isolation
Temperature range: -4 °C/+85°C (-4 °F/+185°F)
For other IEC 6185 server products see also the following link:
Converter IEC 61850 Server to
www.adfweb.com?Product=HD67733 Modbus Master)
www.adfweb.com?Product=HD67734 Modbus Slave)
www.adfweb.com?Product=HD67736 Modbus TCP Slave)
www.adfweb.com?Product=HD67737 BACnet Master)
www.adfweb.com?Product=HD67738 BACnet Slave)
www.adfweb.com?Product=HD67739 CAN)
www.adfweb.com?Product=HD6774 CANopen)
www.adfweb.com?Product=HD67741 DeviceNet Master)
www.adfweb.com?Product=HD67742 DeviceNet Slave)
www.adfweb.com?Product=HD67743 EtherNet/IP Master)
www.adfweb.com?Product=HD67744 EtherNet/IP Slave)
www.adfweb.com?Product=HD67745 J1939)
www.adfweb.com?Product=HD67746 KNX)
www.adfweb.com?Product=HD67747 MQTT)
www.adfweb.com?Product=HD67748 NMEA 0183)
www.adfweb.com?Product=HD67749 NMEA 2000)
www.adfweb.com?Product=HD6775 PROFIBUS Master)
www.adfweb.com?Product=HD67751 PROFIBUS Slave)
www.adfweb.com?Product=HD67B82 PROFINET Master)
www.adfweb.com?Product=HD67752 PROFINET Slave)
www.adfweb.com?Product=HD67753 SNMP Manager)
www.adfweb.com?Product=HD67754 SNMP Agent)
Do you have your customer protocol? Then go to:
www.adfweb.com?Product=HD67 3
Do you need to choose a device? Do you want help?
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 2 of 28
INDEX:
Page
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
POWER SUPPLY 7
FUNCTION MODES 8
LEDS 9
ETHERNET 1
USE OF COMPOSITOR SW67735 11
NEW CONFIGURATION / OPEN CONFIGURATION 12
SOFTWARE OPTIONS 13
SET COMMUNICATION 15
IEC 6185 ACCESS 18
MODBUS SET ACCESS 19
TLS KNOWN CERTIFICATE 22
UPDATE DEVICE 23
MECHANICAL DIMENSIONS 25
ORDERING INFORMATIONS 26
ACCESSORIES 26
DISCLAIMER 27
OTHER REGULATIONS AND STANDARDS 27
WARRANTIES AND TECHNICAL SUPPORT 28
RETURN POLICY 28
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.
Revision Date Author Chapter Description
1. 18/ 9/2 18 Ff All First Release

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 3 of 28
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 4 of 28
EXAMPLES OF CONNECTION:

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 5 of 28
CONNECTION SCHEME:
Figure 1: Connection scheme for HD67735-A1

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 6 of 28
CHARACTERISTICS:
The HD67735-A1 are IEC 6185 / Modbus TCP Master - Converters.
It allows for the following characteristics:
Up to 512 Modbus reading requests and 512 Modbus writing requests;
Isolation between Ethernet - Power Supply;
Two-directional information between IEC 6185 bus and Modbus TCP bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -4 °C / 85°C [-4 °F / +185°F].
CONFIGURATION:
You need Compositor SW67735 software on your PC in order to perform the following:
Define the parameters of IEC 6185 line;
Define the parameters of Modbus TCP line;
Define IEC 6185 variables that contains the data read from the Modbus TCP slaves;
Define IEC 6185 variables that contains the data to send to the Modbus TCP slaves;
Update the device.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 7 of 28
POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67735-A1 3.5
HD67735-A1
Caution:
Do n
ot reverse the polarity power

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 8 of 28
FUNCTION MODES:
The device has got two function modes depending on the position of the ‘Dip1 of Dip-Switch A’:
The first, with ‘Dip1 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device.
The second, with ‘Dip1 of Dip-Switch A’ at “ON” position, is used for uploading the Project and/or Firmware.
For the operations to follow for the updating, see ‘UPDATE DEVICE’ section.
According to the functioning mode, the LEDs will have specific functions, see ‘LEDS’ section.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 9 of 28
LEDS:
The device has got six LEDs that are used to give information about the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: ON [supply voltage ]
(green)
ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: Device State (green) Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly ~0.5Hz): update in progress
3: IEC 6185 communication
(green) It blinks when a IEC 6185 request is received Blinks quickly: Boot state Blinks very slowly ~0.5Hz): update in progress
4: Modbus communication
(green) It blinks when a Modbus TCP response is received Blinks quickly: Boot state
Blinks very slowly ~0.5Hz): update in progress
5: Ethernet1 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly ~0.5Hz): update in progress
6: Ethernet2 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly ~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 1 of 28
ETHERNET:
IEC 6185 and Modbus TCP connection and the updating of the converter must be made using Connector3 and/or Connector4 of the
HD67733-X-A1 with at least a Category 5E cable. The maximum length of the cable should not exceed 1 m. The cable has to conform to
the T568 norms relative to connections in cat.5 up to 1 Mbps. To connect the device to an Hub/Switch is recommended the use of a
straight cable, to connect the device to a PC/PLC/other is recommended the use of a cross cable.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 11 of 28
USE OF COMPOSITOR SW67735:
To configure the Converter, use the available software that runs with Windows called SW67735. It is downloadable on the site
www.adfweb.com and its operation is described in this document. This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 1 ; 32/64bit).
When launching the SW67735, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2:
Main window for SW67735

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 12 of 28
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a programmable “IEC 6185 Server / Modbus TCP
Master - Converter” in order to configure another device in the same manner, it is
necessary to maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 13 of 28
SOFTWARE OPTIONS:
By pressing the “Settings” ( ) button there is the possibility to change the language of the software and check the updatings for the
compositor.
In the section “Language” it is possible to change the language of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Program”, the
SW67735 checks automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 14 of 28
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 15 of 28
SET COMMUNICATION:
By Pressing the “Set Communication” button from the main window for SW67735
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The window is divided in different sections in order to define the different
parameters of the converter:
IEC 6185 Server
TLS (Transport Layer Security) Server
Modbus TCP Master
Figure 3a: “Set Communication” window

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 16 of 28
Figure 3b: “Set Communication  IEC 61850
Server” window
Figure 3c: “Set Communication

TLS” window
IEC 61850 S ERVER :
This section is used to define the main parameters of IEC 6185 line. The means of
the fields are:
In the field “Port” the port used for IEC 6185 communication is defined;
If the field “Password” the password used for accessing to IEC 6185
variables is defined.
TLS T RANSPORT L AYER S ECURITY ) S ERVER
This section is used to define the main parameters of TLS protocol. The means of
the fields are:
If the field “Enable TLS” is checked, the TLS protocol for secure connection
is enabled;
In the field “Key” the key for the authentication is defined;
In the field “Key Password” the password for decrypting the key is defined;
In the field “Server Certificate” the certificate for the server is defined;
In the field “Root Certificate” the root of the server is defined;
If the field “Enable Only Known Certificates” is checked, the converter will
accept just connection from known Clients (defined in the section “TLS
Known Certificate”).

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 17 of 28
Figure 3d: “Set Communication  Modbus Master”
window
M ODBUS TCP M ASTER :
This section is used to define the main parameters of Modbus TCP line. The means
of the fields are:
In the field “IP Address” the IP address of the converter is defined;
In the field “SubNet Mask” the Subnet Mask of the converter is defined;
In the field “Gateway” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field “TimeOut ms)” the maximum time that the converter attends
for the answer from the Slave interrogated is defined;
In the field “Cyclic Delay ms)” the delay (idle time) between two Modbus
requests is defined.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 18 of 28
Figure 4: “IEC 61850 Access” window
IEC 61850 ACCESS:
By Pressing the “IEC 61850 Access” button from the main window for SW67735 (Fig. 2) the window “Set Variables Access for IEC 6185 ”
appears (Fig. 4).
This section is used to define the IEC 6185 variables from/to which take/map the data of Modbus TCP slaves.
The means of the fields are:
If the field “Enable” is checked, the IEC 6185 variable is enabled;
In the field “Name” the name of the IEC 6185 variable is defined;
In the field “Type” the data format of the IEC 6185 variable is defined;
If the field “Read Only” is checked, the IEC 6185 variable is just in reading. Otherwise, it is writeable too;
In the field “Position” the starting byte of the internal memory arrays from/to which taking/mapping the data is defined;
In the field “Start Bit” the starting bit of the byte of the field “Position” is defined;
In the field “Conversion” the conversion of the data is defined. This option is used to convert the data format between Modbus and
IEC 6185 ;
In the field “Molt. Factor” a multiplicative factor of the value is defined;
In the field “Mnemonic” a description of the variable is defined.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 19 of 28
MODBUS SET ACCESS:
By pressing the “Modbus Set Access” button from the main window for SW67735 (Fig. 2) the window “Set Modbus Access” appears.
This window is divided in two parts, the "Modbus Read" (Fig. 5a) and the "Modbus Write " (Fig. 5b).
The "Modbus Read" part is used to read the data from the Modbus TCP slaves and make them available on IEC 6185 side.
The "Modbus Write" part is used to write the data that arrives from IEC 6185 side to the Modbus TCP slaves.
M ODBUS R EAD
The means of the fields are:
If the field “Enable” is checked, the Modbus request is enabled;
In the field “Slave IP Address” the IP address of the Modbus TCP device to read is defined;
In the field “Slave ID” the address of the Modbus device to read is defined;
In the field “Port” the TCP port to use for the Modbus TCP port with the slave is defined;
In the field “Type” the data type of the register to read is defined. It is possible to choose between the following:
oCoil Status;
oInput Status
oHolding Register;
oInput Register.
In the field “Address” the starting address of the register to be read is defined;
In the field “NPoint” the number of consecutive registers to be read is defined;
Figure 5a: “Set Access  Modbus Read”

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
IEC 61850 Server / Modbus TCP Master
Document code: MN67735_ENG Revision 1. Page 2 of 28
In the field “Poll Time” the delay time to make the request is defined;
In the field “Max Error” the number of consecutive errors that the converter waits before suspending the request until the next
reboot is defined. If is set to ‘ ’ this function is disabled;
In the field “Position” the address of the internal array where placing the information is defined;
In the field “Start Bit” the starting bit of the first byte of the field “Position” is defined;
If the field “Swap” is checked, the bytes of the Modbus registers are swapped;
If the field “SwapWord” is checked, the words of the 32 bit values are swapped;
In the field “Mnemonic” the description for the request is defined.
M ODBUS W RITE
The means of the fields are:
If the field “Enable” is checked, the Modbus request is enabled;
In the field “Slave IP Address” the IP address of the Modbus TCP device to write is defined;
In the field “Slave ID” the address of the Modbus device that you have to write is defined;
In the field “Port” the TCP port to use for the Modbus TCP port with the slave is defined;
In the field “Type” the data type of the register to write is defined. It is possible to choose between the following:
oCoil Status;
oHolding Register.
In the field “Address” the start address of the register to be written is defined;
Figure
5b
:
“Set Access

Modbus Write” window