ADJ ECO UV BAR PLUS IR User manual

ECO UV BAR PLUS IR
User Instructions

2
©2021 ADJ Products, LLC all rights reserved. Information, specications, diagrams, images, and
instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product
names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes
all forms and matters of copyrightable materials and information now allowed by statutory or judicial
law or hereinafter granted. Product names used in this document may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, LLC
brands and product names are trademarks or registered trademarks of their respective companies.
ADJ Products, LLC and all afliated companies hereby disclaim any and all liabilities for property,
equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic
loss associated with the use or reliance of any information contained within this document, and/or as a
result of the improper, unsafe, insufcient and negligent assembly, installation, rigging, and operation
of this product.
ADJ PRODUCTS LLC World Headquarters
6122 S. Eastern Ave. | Los Angeles, CA 90040 USA
Tel: [phone] | Fax: [phone] | www.adj.com |[email protected]
ADJ Supply Europe B.V.
Junostraat 2 | 6468 EW Kerkrade | Netherlands
Tel: [phone] | Fax: [phone] | www.americandj.eu | [email protected]
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the environment. Please turn off all electrical products
when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment
from power when not in use. Thank you!
DOCUMENT VERSION
Due to additional product features and/or enhancements, an updated version of this
document may be available online.
Please check www.adj.com for the latest revision/update of this manual before
beginning installation and/or programming.
Date Document
Version
Software
Version > DMX Channel Mode Notes
03/14/2013 1.0 N/C N/C Initial Release
10/16/2013 1.5 N/C N/C Added UV warning & expanded IR Remote instructions
09/06/2021 2.0 N/C N/C Updated Format, Warranty, & Dimensions

CONTENTS
3
General Information 4
Limited Warranty (USA Only) 5
Safety Guidelines 6
Overview 7
Operation 8
Infrared Remote 8
Troubleshooting | Cleaning | Maintenance 9
Specications 10
Dimensional Drawings 11

4
GENERAL INFORMATION
INTRODUCTION
Please read and understand all instructions in this manual carefully and thoroughly before attempting
to operate these products. These instructions contain important safety and use information.
UNPACKING
The products in this kit have been thoroughly tested and have been shipped in perfect operating
condition. Carefully check the shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect each unit included for damage and be sure all
accessories necessary to operate the units have arrived intact. In the event damage has been found
or parts are missing, please contact our customer support team for further instructions. Please do not
return this kit to your dealer without rst contacting customer support at the number listed below. Please
do not discard the shipping carton in the trash. Please recycle whenever possible.
WARRANTY RETURNS
All returned service items whether under warranty or not, must be freight pre-paid and accompany a
return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return
package. A brief description of the problem as well as the R.A. number must also be written down on
a piece of paper and included in the shipping container. If the unit is under warranty, you must provide
a copy of your proof of purchase invoice. Items returned without a R.A. number clearly marked on the
outside of the package will be refused and returned at customer’s expense. You may obtain a R.A.
number by contacting customer support.

5
LIMITED WARRANTY (USA ONLY)
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing
defects in material and workmanship for a prescribed period from the date of purchase (see specic warranty period
on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including
possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable
evidence, at the time service is sought.
B. For warranty service, you must obtain a Return Authorization number (RA#) before sending back the product-please
contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC
factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are
within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within
the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be
shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability
whatsoever for loss of or damage to any such accessories, or for the safe return thereof.
C. This warranty is void of the serial number has been altered or removed; if the product is modied in any manner which
ADJ Products, LLC concludes, after inspection, affects the reliability of the product, if the product has been repaired or
service by anyone other than ADJ Products, LLC factory unless prior written authorization was issued to purchaser by
ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
D. This is not a service contact, and this warranty does not include maintenance, cleaning or periodic check up. During
the period specied above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts,
and will absorb all expenses for warrant service and repair labor by reason of defects in material or workmanship. The
sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement
thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were
manufactured after August 15, 2012, and bear identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any
obligation to include these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products
described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC
in connection with this product, including warranties of merchantability or tness, are limited in duration to the warranty
period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or
tness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be
such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products, LLC be
liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties
and written descriptions of warranty terms and conditions heretofore published.
LIMITED WARRANTY PERIODS
• Non L.E.D. Lighting Products = 1-year (365 days) Limited Warranty (Such as: Special Effect Lighting, Intelligent
Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc.
excluding LED and lamps)
• Laser Products = 1 Year (365 Days) Limited Warranty (excludes laser diodes which have 6 month limited warranty)
• L.E.D. Products = 2-year (730 days) Limited Warranty (excluding batteries which have a 180 day limited warranty)
Note: 2 Year Warranty only applies to purchases within the United States.
• StarTec Series = 1 Year Limited Warranty (excluding batteries which have a 180 day limited warranty)
• ADJ DMX Controllers = 2 Year (730 Days) Limited Warranty

SAFETY GUIDELINES
RISKGROUP3-RISKOFEXPOSURETOULTRAVIOLET
UV RADIATION! FIXTURE EMITS HIGH INTENSITY
WAVELENGTH OF ULTRAVIOLET UV LIGHT AT A
400NM - 428NM WAVELENGTH. WEAR PROPER
EYE AND SKIN PROTECTION. AVOID PROLONGED
PERIODS OF EXPOSURE TO UV COLOR FILTER.
AVOID WEARING WHITE COLOR CLOTHING AND/OR
USING UV PAINTS ON SKIN. AVOID DIRECT EYE AND/
OR SKIN EXPOSURE AT DISTANCES LESS THAN
11 feet (3.3m). DO NOT OPERATE FIXTURE WITH
DAMAGED/MISSING EXTERNAL COVERS. DO NOT
LOOK DIRECTLY INTO THE UV LIGHT AND/OR VIEW
UV LIGHT DIRECTLY WITH OPTICAL INSTRUMENTS
THAT MAY CONCENTRATE THE LIGHT/RADIATION
OUTPUT. INDIVIDUALS SUFFERING FROM A
RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE DIS-ORDERS, OR INDIVIDUALS
USING PHOTOSENSITIVE MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO THE
ULTRAVIOLET UV LIGHT EMITTED FROM THE UV LED.
This xture is a sophisticated piece of electronic equipment. To guarantee smooth operation, it is
important to follow all instructions and guidelines in this manual. ADJ Products, LLC. is not responsible
for injury and/or damages resulting from the misuse of this xture due to the disregard of the information
printed in this manual. Only qualied and/ or certied personnel should perform installation of this
xture and only the original rigging parts included with this xture should be used for installation. Any
modications to the xture and/or the included mounting hardware will void the original manufacturer’s
warranty and increase the risk of damage and/or personal injury.
PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED.
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.DO NOT ATTEMPT ANY REPAIRS
YOURSELF; DOING SO WILL VOID YOUR MANUFACTURER’S WARRANTY. DAMAGES RESULTING
FROM MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND
GUIDELINES IN THIS MANUAL VOID THE MANUFACTURE’S WARRANTY AND ARE NOT SUBJECT TO
ANY WARRANTY CLAIMS AND/OR REPAIRS.
DO NOT PLUG FIXTURE INTO A DIMMER PACK! NEVER OPEN THIS FIXTURE WHILE IN USE! UNPLUG
POWER BEFORE SERVICING FIXTURE! NEVER TOUCH FIXTURE DURING OPERATION, AS IT MAY
BE HOT! KEEP FLAMMABLE MATERIALS AWAY FROM FIXTURE!
NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE! RETINA INJURY RISK - MAY INDUCE
BLINDNESS!SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!
INDOOR / DRY LOCATIONS USE ONLY!DO NOT EXPOSE FIXTURE TO RAIN AND MOISTURE!
MINIMUM DISTANCE TO OBJECTS/SURFACES MUST BE 6.6 FEET (2 METERS) MAXIMUM TEMP OF
EXTERNAL SURFACE 185° F (85°C) MINIMUM DISTANCE OF INFLAMMABLE MATERIALS FROM THE
SURFACE 1.6 FEET (0.5 METER)
6

OVERVIEW
Adjustable Mounting Bracket
Remote Control
UV LEDs/Lens
SAFETY CABLE
ALWAYS ATTACH A SAFETY
CABLE WHENEVER INSTALLING
THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE
THE FIXTURE WILL NOT FALL IF
THE CLAMP FAILS.
7

OPERATION
The ADJ Eco UV Bar Plus IR contains an electronic ballast, which will auto sense the voltage when it is
plugged into the power source. With the electronic voltage switch, you do not need to worry about wall
voltage as this unit can be plugged in anywhere. This xture is designed to operate as a stand alone
unit with no extra assembly necessary. The Eco UV Bar Plus IR is ready to be plugged in out of the box.
Plug the unit in to a matching power outlet or into a power pack, and “ip” the power switch to the On
position. Use the included UC IR to control the unit.
NOTE: A maximum of 10 xtures can be connected in a daisy chain. Do not mix xtures as the
results are unpredictable and could be catastrophic.
INFRARED REMOTE
The UC IR infrared remote (Included) gives you control of various functions (See below). To control the
xture you must aim the remote at the front of the xture and be no more than 30 feet away.
The Airstream IR (sold separately) remote transmitter plugs into the headphone jack of your iOS
phone or tablet. To control your IR xture you must raise the volume to the maximum on your iOS phone
or tab- let and aim the transmitter at the xture sensor and be no more than 15 feet away. After you
have purchased the Airstream IR transmitters, the app is a free download from the app store for your
iOS phone or tablet. The app comes with 3 pages of control depending on the x- ture you are using.
Please see below for IR functions. This unit works with App page 1.
STAND BY - Pressing this button will blackout the xture. FULL ON - Press this button down to fully
light up the unit.
FADE/GOBO - Press this button to activate UV fade mode. Press button 1 for slow fade, button 2 for
medium fade, and button 3 for fast fade.
“DIMMER +” and “DIMMER -” - Use these buttons to adjust the out- put intensity when UV color mode
is active.
STROBE - Press this button to activate strobing. Press button 1 for slow strobe, button 2 for medium
strobe, button 3 for fast strobe, and button 4 for the fastest strobing.
COLOR - Press this button to activate UV color mode. Adjust the output intensity using the
“DIMMER +” and “DIMMER -” buttons.
1-9 - When in strobe use buttons 1-4 to adjust the strobe rate. In fade mode use buttons 1-3 to adjust
the fade speed.
SOUND ON & SOUND OFF - These buttons are invalid for this xture.
SHOW - This button is invalid for this xture.
10-meters is the maximum effective
range of the IR Remote
8

TROUBLESHOOTING
Listed below are a few common problems the user may encounter, with solutions.
Unit not powered on:
• Check that the xture is plugged in.
Unit not responding to DMX:
• Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on
some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right
connectors; it does matter which way the inputs and outputs are connected.
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Frequent cleaning is recommended to ensure proper function, optimized light output, and an extended
life. The frequency of cleaning depends on the environment in which the xture operates: damp, smoky,
or particularly dirty environments can cause greater accumulation of dirt on the xture’s optics. Clean
the external lens surface periodically with a soft cloth to avoid dirt/debris accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to ensure proper function and extended life.
There are no user serviceable parts inside this xture, please refer all other service issues to an
authorized ADJ service technician. Should you need any spare parts, please order genuine parts from
your local ADJ dealer.
Please refer to the following points during routine inspections:
• A detailed electrical check by an approved electrical engineer every three months, to make sure the
circuit contacts are in good condition in order to prevent overheating.
• Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out
during normal operation, resulting in damage or injury as larger parts could fall.
• Check for any deformations on the housing, color lenses, rigging hardware, and rigging points
(ceiling, suspension, trussing). Deformations in the housing could allow for dust or liquids to enter
into the xture. Damaged rigging points or unsecured rigging could cause xture to fall and seriously
injure a person(s).
• Electric power supply cables must not show any damage, material fatigue, or sediments.
• NEVER remove the ground prong from the power cable.
9

SPECIFICATIONS
• Bright, high output ultraviolet bar with 18x 3-Watt UV LEDs
• Great for performance stages, theatrical productions and special effects installations
• Includes ADJ’s UC IR infrared wireless remote control
• Control strobe, fade and On/Off with remote
• On/Off switch on rear panel
• Wide Beam Spread: 120-degree
• IEC In/Out Connections to Daisy Chain Power (Up to 10 Fixtures)
• Includes adjustable mounting brackets for wall/ceiling mount or to set on the oor for wall washing
• Long Life LEDs (Rated at approximately 50,000 hrs.)
• Power Draw: 60W
• Multi-voltage operation: AC 100V-240V 50/60Hz
• Light Source: 18x 3-Watt UV LEDs
• Refresh Rate: 1KHz
• Wavelength: 395-405nm
• Dimensions (LxWxH): 39.5” x 2.5” x 4.5” / 1000 x 60 x 110.5mm
• Weight: 6 lbs. / 2.4 kgs
• cETLus approved (Control #4002034)
Specications and documentation subject to change without notice.
OPTIONAL ACCESSORIES
SKU# Models
ECCOM-3 3’ Male to Female, 16/3 Guage, IEC Ext. Cord 6’
ECCOM-6 Male to Female, 16/3 Guage, IEC Ext. Cord
ECCOM-10 10’ Male to Female, 16/3 Guage, IEC Ext. Cord
10

Dimensions not drawing to scale
DIMENSIONS
11

12
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS
This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This device uses and can radiate radio frequency energy and, if not installed and used in
accordance with the included instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device
does cause harmful interference to radio or television reception, which can be determined by turning
the device off and on, the user is encouraged to try to correct the interference by one or more of the
following methods:
• Reorient or relocate the device.
• Increase the separation between the device and the receiver.
• Connect the device to an electrical outlet on a circuit different from which the radio receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the environment. Please turn off all electrical products
when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment
from power when not in use. Thank you