ADJ FOC635 User manual

FOCUS SPOT 6Z
User Manual
USA# FOC635
EU# 1237000301
UPC# 818651028133

Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment. Please turn o all electrical prod-
ucts when they are not in use. To avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
©2020 ADJ Products, LLC all rights reserved. Information, specications, diagrams, images, and
instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying
product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection
claimed includes all forms and matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted. Product names used in this document may be
trademarks or registered trademarks of their respective companies and are hereby acknowledged.
All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of
their respective companies.
ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property,
equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic
loss associated with the use or reliance of any information contained within this document, and/or as
a result of the improper, unsafe, insucient and negligent assembly, installation, rigging, and opera-
tion of this product.
DOCUMENT VERSION
Due to additional product features and/or enhancements, an updated version of
this document may be available online.
Please check www.adj.com for the latest revision/update of this manual
before beginning installation and/or programming.
Date Document
Version
Software
Version
DMX Channel Modes Notes
07/31/2020 1.0 1.2.1 21 / 25 / 29 Channels Initial Release
08/11/2020 1.1 NC No Change Updated Gobo Replacement
09/10/2020 1.2 1.2.2 No Change Updated System Menu, DMX Modes &
Values, Primary-Secondary Setup

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 3
Focus Spot 6Z Table of Contents
Introduction 4
Features | Warranty Registration 5
Safety Precautions 6
Installation 7
Overview 10
DMX Setup 11
DMX Addressing 13
DMX Modes & Values 14
System Menu 23
Primary-Secondary Setup 30
Dimmer Modes 31
Gobo Replacement 32
Gobos 36
Color Wheels | Fuse Replacement 37
Multi Unit Power Linking | Trouble Shooting | Cleaning 38
Software Updates 39
Warranty 40
Dimensional Drawings 41
Specications 42

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 4
Focus Spot 6Z Introduction
Unpacking: Thank you for purchasing the Focus Spot 6Z by ADJ Products, LLC. Every unit has been
thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your xture for any damage and be sure all accessories necessary to operate the unit
have arrived intact. In the case that damage has been found or parts are missing, please contact our
toll free customer support number for further instructions. Do not return this unit to your dealer without
rst contacting customer support.
Introduction: The Focus Spot 6Z is a DMX intelligent, moving head, LED fixture. This xture can be used in
stand alone mode, or connected in a Master/Slave conguration. The fixture comes equipped with motor-
ized focus and zoom, 6 different dimming options, and 3 DMX channel modes (21, 25, or 29 channels).
This product is intended to be used by professionally trained personnel only and is not suitable for
private use.
Customer Support: Contact ADJ Service for any product related service and support needs. Also visit
forums.adj.com with questions, comments or suggestions.
Parts: To purchase parts online visit http://parts.adj.com
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
Voice: 800-322-6337 | Fax: [phone] | [email protected]
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
Voice: [phone] | Fax: [phone] | [email protected]
ADJ PRODUCTS LLC USA
6122 S. Eastern Ave. Los Angeles, CA. 90040
323-582-2650 | Fax [phone] | www.adj.com | [e-mail]
ADJ SUPPLY Europe B.V
Junostraat 2 6468 EW Kerkrade, The Netherlands
[phone] | Fax [phone]
www.adj.eu | [email protected]
ADJ PRODUCTS GROUP Mexico
AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000
[phone]
Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,
doing so will void your manufactures warranty. In the unlikely event your unit may require service
please contact ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.

Focus Spot 6Z Features
Focus Spot 6Z Warranty Registration
The Focus Spot 6Z carries a 2 year limited warranty. Please fill out the enclosed warranty card to
validate your purchase. All returned service items whether under warranty or not, must be freight pre-
paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on
the outside of the return package. A brief description of the problem as well as the R.A. number must
also be written down on a piece of paper included in the shipping carton. If the unit is under warranty,
you must provide a copy of your proof of purchase invoice. You may obtain an R.A. number by con-
tacting our customer support team. All packages returned to the service department not displaying an
R.A. number on the outside of the package will be returned to the shipper.
ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 5
• Motorized Focus
• 2 Frost Filters to create wash effects
• Motorized Zoom: 9~28 degrees
• 2 Prism FX: Rotating 6-facet Linear & Rotating 6-facet Circular
• Motorized Iris
• Motorized Shutter
• GOBO Morphing
• 0-100% smooth dimming
• Various strobe speeds
• USB firmware update port
Included:
1x Locking power cord
2x Omega brackets

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 6
Focus Spot 6Z Safety Precautions
• DO NOT TOUCH the xture housing during operation. Disconnect the power and allow approximately
15 minutes for the xture to cool down before servicing.
• DO NOT shake the xture, and avoid brute force when installing and/or operating the xture.
• DO NOT operate the xture if the power cord has become frayed, crimped and/or damaged. If the
power cord is damaged, replace immediately with a new one of similar power rating.
• DO NOT attempt to remove or break o the ground prong from the electrical cord. This prong is
used to reduce the risk of electrical shock and re in case of an internal short.
• DO NOT attempt to operate this unit if it has been damaged.
• DO NOT spill water or other liquids into or on to your unit.
• This unit is intended for indoor use only. Use of this product outdoors voids all warranties.
• To reduce the risk of electrical shock or re, do not expose this unit rain or moisture.
• Disconnect from main power before making any type of connection.
• DO NOT block any air ventilation slots. All fan and air inlets must remain clean and never blocked.
Allow approx. 6” (15cm) between xture and other devices or a wall for proper cooling.
• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6”
(15cm) between this device and a wall.
• During the initial operation of this xture, a light smoke or smell may emit from the interior of the
xture. This is a normal process and is caused by excess paint in the interior of the casing burning
o from the heat. This will decrease gradually over time.
• DO NOT remove the cover under any conditions. There are no user serviceable parts inside.
• When installing xture in a suspended enviroment, always use mounting hardware that is no less
than M10 x 25mm, and always install xture with an appropriately rated safety cable.
• Never operate this unit with the cover removed.
• Never plug this unit in to a dimmer pack
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by the manufacturer.
• Heat -The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug have been damaged.
B. Objects have fallen onto, or liquid has been spilled into, the fixture.
C. The fixture has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a marked change in performance.
E. The fixture has fallen and/or subjected to extreme handling.

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 7
Focus Spot 6Z Installation
POTENTIAL INTERNAL FIXTURE DAMAGE FROM EXTERNAL SOURCES OF LIGHT BEAMS
External sources of light beams from direct sunlight, lighting moving head xtures, and lasers, which
are focused directly towards the exterior housing and/or penetrate the front lens opening of ADJ
lighting xtures, can cause severe internal damage including burning of optics, dichroic color lters,
glass and metal gobos, prisms, animation wheels, frost lters, iris, shutters, motors, belts, wiring,
discharge lamps, and LEDs.
This issue is not specic only to ADJ lighting xtures; it is a common issue with lighting xtures
from all manufacturers. Although there is no true way to fully prevent this issue from happening, the
guidelines below can prevent any potential damage from occurring if followed. Contact ADJ Service
for more details.
DO NOT EXPOSE THE FIXTURE AND/OR FRONT LENS OPENING TO LIGHT BEAMS FROM DIRECT
SUNLIGHT, OTHER LIGHTING MOVING HEAD FIXTURES, AND LASERS DURING UNPACKING,
INSTALLATION, USE, AND EXTENDED IDLE TIMES OUTDOORS.
DO NOT FOCUS A LIGHT BEAM FROM ONE LIGHTING FIXTURE DIRECTLY TOWARDS ANOTHER.

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 8
Focus Spot 6Z Installation
Screw one clamp each via a M12 screw and nut into the Omega bracket. Insert the quick-lock fasteners of
the Omega holder’s into the respective holes on the bottom of the Focus Spot 6Z. Tighten the quick-lock
fasteners fully clockwise. Pull the safety cable through the openings located on the base plate and
over the trussing system or a safe xation spot. Insert the end in the carabine and tighten the safety
screw.
When installing the unit, the trussing or area of installation must be able to hold 10 times the weight
without any deformation. When installing the unit must be secured with a secondary safety attachment,
e.g. and appropriate safety cable. Never stand directly below the unit when mounting, removing, or
servicing the unit.
Overhead mounting requires extensive experience, including calculating working load limits, installation
material being used, and perodic safety inspection of all installation material and unit. If you lack
these qualications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 9
Focus Spot 6Z Installation
The Focus Spot 6Z is fully operational in three dierent mounting positions, hanging upside-down
from a ceiling or trussing, sideways on trussing, or set on a at level surface. Be sure this xture is
kept at least 12m (40ft) away from any ammable materials (decoration etc.). Always use and install
a safety cable (not included) as a safety measure to prevent accidental damage and/or injury in the
event the clamp fails. Never use the carrying handles for secondary attachment.
NOTICE: The max suitable enviromental temperature for this lighting xture is 45˚C. Do not place
this lighting xture in an enviroment where the temperatures are under or above the temperatures
stated above. This will allow the xture to run at its best and help prolong the xture life.

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 10
Focus Spot 6Z Overview
1. Service Port
2. Display Screen
3. Left Button
4. Down Button
5. Enter Button
6. Right Button
7. Carry Handles
8. Mode Button
9. Up Button
10. Power Out
11. Power In
12. Fuse T5A/250V
13. Net In
14. Net Out
15. Safety Cable Attachment Point
16. 5-pin DMX In
17. 5-pin DMX Out
18. 3-pin DMX Out
19. 3-pin DMX In
20. Pan Lock

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 11
Focus Spot 6Z DMX Set Up
DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used as a form of commu-
nication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions
from the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture
via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only
have a DATA “OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models of dierent manufactures to be
linked together and operate from a single controller, as long as all xtures and the controller are DMX
compliant. To ensure proper DMX data transmission, when using several DMX fixtures try to use
the shortest cable path possible. The order in which fixtures are connected in a DMX line does not
influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed
anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is
assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that
unit, no matter where it is located in the DMX chain.
Data Cable (DMX Cable) Requirements (For DMX Operation): The Focus Spot 6Z can be controlled
via DMX-512 protocol. The DMX address is set on the front panel of the Focus Spot 6Z. Your unit and
your DMX controller require a standard 3-pin XLR connector for data input and data output. We recom-
mend Accu-Cable DMX cables. If you are making your own cables, be sure to use standard 110-120
Ohm shielded cable (This cable may be purchased at almost all pro lighting stores). Your cables should
be made with a male and female XLR connector on either end of the cable. Also remember that DMX
cable must be daisy chained and cannot be split.
Notice: Be sure to follow gures 1 and 2 when making your own cables. Do not use the ground lug on
the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield
conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a short
circuit and erratic behavior.
Figure 2
1 Ground 1 Ground
XLR Male Socket XLR Pin Conguration
3 Hot
2 Cold 2 Cold
3 Hot
XLR Female Socket
Pin 3 = Data True (positive)
Pin 2 = Data Compliment (negative)
Pin 1 = Ground
Figure 1

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 12
Special Note: Line Termination. When longer runs of cable are used, you may need to use a termina-
tor on the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is
connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted
in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable
terminator (ADJ part number Z-DMX/T) will decrease the possibilities of erratic behavior.
Focus Spot 6Z DMX Set Up
5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX-512 data cables for DATA transmis-
sion in place of 3-pin. 5-pin DMX xtures may be implemented in a 3-pin DMX line. When inserting
standard 5-pin data cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily
available at most electric stores. The chart below details a proper cable conversion.
Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)
Pin 1
Do Not Use
Do Not Use
Pin 3
Pin 2
Pin 1
Pin 3
Pin 2
Not Used
Not Used
Data True (+ signal)
Data Compliment (- signal)
Ground/Shield
3-Pin XLR to 5-Pin XLR Conversion

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 13
All xtures should be given a DMX starting address when using a DMX controller, so the correct xture
responds to the correct control signal. This digital starting address is the channel number from which
the xture starts to “listen” to the digital control signal sent out from the DMX controller. The assignment
of this starting DMX address is achieved by setting the correct DMX address on the digital control
display on the xture.
You can set the same starting address for all xtures or a group of xtures, or set dierent addresses
for each individual xture. Setting all xtures to the same DMX address will cause all xtures to react
in the same way, in other words, changing the settings of one channel will aect all the xtures
simultaneously.
If you set each xture to a dierent DMX address, each unit will start to “listen” to the channel number
you have set, based on the quantity of DMX channels of each xture. That means changing the settings
of one channel will only aect the selected xture.
In the case of the Focus Spot 6Z, when in 21 channel mode you should set the starting DMX address
of the rst unit to 1, the second unit to 22 (21 + 1), the third unit to 43 (22 + 21), and so on. (See the
chart below for more details.)
Focus Spot 6Z DMX Addressing
Channel Mode Unit 1 Address Unit 2 Address Unit 3 Address Unit 4 Address
21 Channels 1 22 43 64
25 Channels 126 51 76
29 Channels 1 30 59 88

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 14
Focus Spot 6Z DMX Modes & Values
ADJ Focus Spot 6Z - DMX Modes and Values
Supports software version 1.2.2 and up.
Features subject to change without notice.
Channel Mode Values Traits
Basic Standard Ext
1 1 1 000 - 255 Pan Movement, 8-bit
2 2 000 - 255 Pan Fine Control, 16-bit
2 3 3 000 - 255 Tilt Movement, 8-bit
4 4 000 - 255 Tilt Fine Control, 16-bit
355
Color Wheel 1
000 - 015 Open / white
016 - 031 Red
032 - 047 Orange
048 - 063 Green
064 - 079 Light Blue
080 - 095 Purple
096 - 111 Magenta
112 - 127 Yellow
128 - 189 Clockwise, fast to slow
190 - 193 No rotation
194 - 255 Counter-clockwise, slow to fast
46 6
Color Wheel 2
000 - 015 Open / white
016 - 031 Orange Red
032 - 047 Yellow Green
048 - 063 Peacock Blue
064 - 079 CTO
080 - 095 CTB
096 - 111 Flourescent Blue
112 - 127 Light Yellow
128 - 189 Clockwise, fast to slow
190 - 193 No rotation
194 - 255 Counter-clockwise, slow to fast
577
Gobo 1, Continuous Rotation (see Gobos section for gobo patterns)
000 - 009 Open
010 - 019 Gobo 1
CONTINUED ON NEXT PAGE

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 15
Focus Spot 6Z DMX Modes & Values
ADJ Focus Spot 6Z - DMX Modes and Values
Supports software version 1.2.2 and up.
Features subject to change without notice.
Channel Mode Values Traits
Basic Standard Ext
5 7 7
Gobo 1, Continuous Rotation (see Gobos section for gobo patterns) (cont’d
from prev page)
020 - 029 Gobo 2
030 - 039 Gobo 3
040 - 049 Gobo 4
050 - 059 Gobo 5
060 - 069 Gobo 6
070 - 079 Gobo 7
080 - 094 Gobo 1 shake, slow to fast
095 - 109 Gobo 2 shake, slow to fast
110 - 124 Gobo 3 shake, slow to fast
125 - 139 Gobo 4 shake, slow to fast
140 - 154 Gobo 5 shake, slow to fast
155 - 169 Gobo 6 shake, slow to fast
170 - 189 Gobo 7 shake, slow to fast
190 - 221 Clockwise, fast to slow
222 - 223 No rotation
224 - 255 Counter-clockwise, slow to fast
68 8 Gobo 1 Rotation
000 - 127 Indexing
128 - 189 Clockwise, fast to slow
190 - 193 No rotation
194 - 255 Counter-clockwise, slow to fast
799
Gobo 2, Continuous Rotation (see Gobos section for gobo patterns)
000 - 009 Open
010 - 019 Gobo 1
020 - 029 Gobo 2
030 - 039 Gobo 3
040 - 049 Gobo 4
050 - 059 Gobo 5
060 - 069 Gobo 6
CONTINUED ON NEXT PAGE

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 16
Focus Spot 6Z DMX Modes & Values
ADJ Focus Spot 6Z - DMX Modes and Values
Supports software version 1.2.2 and up.
Features subject to change without notice.
Channel Mode Values Traits
Basic Standard Ext
799
Gobo 2, Continuous Rotation (see Gobos section for gobo patterns) (cont’d
from previous page)
070 - 079 Gobo 7
080 - 094 Gobo 1 shake, slow to fast
095 - 109 Gobo 2 shake, slow to fast
110 - 124 Gobo 3 shake, slow to fast
125 - 139 Gobo 4 shake, slow to fast
140 - 154 Gobo 5 shake, slow to fast
155 - 169 Gobo 6 shake, slow to fast
170 - 189 Gobo 7 shake, slow to fast
190 - 221 Clockwise, fast to slow
222 - 223 No rotation
224 - 255 Counter-clockwise, slow to fast
8 10 10
Gobo 2 Rotation
000 - 127 Indexing
128 - 189 Clockwise, fast to slow
190 - 193 No rotation
194 - 255 Counter-clockwise, slow to fast
9 11 11
Shutter, Strobe
000 - 031 No function (shutter closed)
032 - 063 Shutter open
064 - 095 Strobe, slow to fast
096 - 127 Shutter open
128 - 159 Pulse eect, slow to fast
160 - 191 Shutter open
192 - 223 Random strobe, slow to fast
224 - 255 Shutter open
10 12 12 000 - 255 Dimmer Intensity, 0 to 100%
13 000 - 255 Dimmer Fine Control, 0 to 100%
CONTINUED ON NEXT PAGE

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 17
Focus Spot 6Z DMX Modes & Values
ADJ Focus Spot 6Z - DMX Modes and Values
Supports software version 1.2.2 and up.
Features subject to change without notice.
Channel Mode Values Traits
Basic Standard Ext
11 13 14
Prism 1
000 - 031 Open
032 - 255 6 facet prism
12 14 15
Prism 1 Indexing and Rotation
000 - 127 Indexing
128 - 189 Clockwise, fast to slow
190 - 193 No rotation
194 - 255 Counter-clockwise, slow to fast
16 000 - 255 Prism 1 ne indexing, 16-bit
13 15 17
Prism 2
000 - 031 Open
032 - 255 5 Linear prism
14 16 18
Prism 2 Indexing and Rotation
000 - 127 Indexing
128 - 189 Clockwise, fast to slow
190- 193 No rotation
194 - 255 Counter-clockwise, slow to fast
19 000 - 255 Prism 2 ne indexing, 16-bit
15 17 20 000 - 255 Focus adjustment, far to near
16 18 21 000 - 255 Zoom, min to max beam angle
22 000 - 255 Zoom ne indexing
17 19 23
Iris
000 - 191 Indexing
192 - 223 Pulse Open, slow to fast
224 - 255 Pulse Close, fast to slow
18 20 24 000 - 255 Frost Filter 1, 0 to 100%
19 21 25 000 - 255 Frost Filter 2, 0 to 100%
22 26
Dim Modes
000 - 020 Standard
021 - 040 Stage
041 - 060 TV
CONTINUED ON NEXT PAGE

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 18
Focus Spot 6Z DMX Modes & Values
ADJ Focus Spot 6Z - DMX Modes and Values
Supports software version 1.2.2 and up.
Features subject to change without notice.
Channel Mode Values Traits
Basic Standard Ext
22 26
Dim Modes (cont’d from previous page)
061 - 080 Architectural
081 - 100 Theatre
101 - 120 Stage 2
Dimming Speed
121 0.1 s
122 0.2 s
123 0.3 s
124 0.4 s
125 0.5 s
126 0.6 s
127 0.7 s
128 0.8 s
129 0.9 s
130 1.0 s
131 1.5 s
132 2.0 s
133 3.0 s
134 4.0 s
135 5.0 s
136 6.0 s
137 7.0 s
138 8.0 s
139 9.0 s
140 10.0 s
141 - 255 Default to unit setting
CONTINUED ON NEXT PAGE

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 19
Focus Spot 6Z DMX Modes & Values
ADJ Focus Spot 6Z - DMX Modes and Values
Supports software version 1.2.2 and up.
Features subject to change without notice.
Channel Mode Values Traits
Basic Standard Ext
23 27
Dim Curves
000 - 020 Linear
021 - 040 Square
041 - 060 Inv. Squa
061 - 080 S. Curve
081 - 255 No function
20 24 28 000 - 255 Pan/Tilt Speed, max to min speed
21 25 29
LED Refresh Rate
000 - 010 Default LED Refresh Rate
011 900 Hz
012 910 Hz
013 920 Hz
014 930 Hz
015 940 Hz
016 950 Hz
017 960 Hz
018 970 Hz
019 980 Hz
020 990 Hz
021 1000 Hz
022 1010 Hz
023 1020 Hz
024 1030 Hz
025 1040 Hz
026 1050 Hz
027 1060 Hz
028 1070 Hz
029 1080 Hz
030 1090 Hz
031 1100 Hz
CONTINUED ON NEXT PAGE

ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 20
Focus Spot 6Z DMX Modes & Values
ADJ Focus Spot 6Z - DMX Modes and Values
Supports software version 1.2.2 and up.
Features subject to change without notice.
Channel Mode Values Traits
Basic Standard Ext
21 25 29
LED Refresh Rate (cont’d from previous page)
032 1110 Hz
033 1120 Hz
034 1130 Hz
035 1140 Hz
036 1150 Hz
037 1160 Hz
038 1170 Hz
039 1180 Hz
040 1190 Hz
041 1210 Hz
042 1220 Hz
043 1230 Hz
044 1240 Hz
045 1250 Hz
046 1260 Hz
047 1270 Hz
048 1280 Hz
049 1290 Hz
050 1300 Hz
051 1310 Hz
052 1320 Hz
053 1330 Hz
054 1340 Hz
055 1350 Hz
056 1360 Hz
057 1370 Hz
058 1380 Hz
059 1390 Hz
060 1400 Hz
061 1410 Hz
CONTINUED ON NEXT PAGE