ADLINK Technology PCI-8570 User manual

[phone] | [email protected] | artisantg.com
-~
ARTISAN
®
~I
TECHNOLOGY
GROUP
Your definitive source
for
quality
pre-owned
equipment.
Artisan Technology
Group
Full-service,
independent
repair
center
with
experienced
engineers
and
technicians
on staff.
We
buy
your
excess,
underutilized,
and
idle
equipment
along
with
credit
for
buybacks
and
trade-ins
.
Custom
engineering
so
your
equipment
works
exactly as
you
specify.
•
Critical
and
expedited
services
•
Leasing
/
Rentals/
Demos
• In
stock/
Ready-to-ship
•
!TAR-certified
secure
asset
solutions
Expert
team
ITrust
guarantee
I
100%
satisfaction
All
tr
ademarks,
br
a
nd
names, a
nd
br
a
nd
s a
pp
earing here
in
are
th
e property of
th
e
ir
r
es
pecti
ve
ow
ner
s.
Find the Acqiris CC105 at our website: Click HERE

PCI-8570/PXI-8570
PCI-to-PXI, PXI-to-PXI Extension
User’s Manual
Recycled Paper

©Copyright -2003 ADLINK Technology Inc;
All Rights Reserved.
Manual Rev 1.00: Dec. 8, 2003
Part No: 50-17002-100
The information in this document is subject to change without prior notice in
order to improve reliability, design, and function and does not represent a
commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental,
or consequential damages arising out of the use or inability to use the product
or documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Trademarks
NuDAQ®, NuIPC®are registered trademarks of ADLINK Technology Inc.
Other products names mentioned herein are used for identification purposes
only and may be trademarks and/or registered trademarks of their respective
companies.

Getting Service from ADLINK
Customer Satisfaction is top priority for ADLINK TECHNOLOGY INC. If you
need any help or service, please contact us.
ADLINK TECHNOLOGY INC.
Web Site http://www.adlinktech.com
Sales & Service [email protected]
TEL [phone] FAX [phone]
Address 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan
Please email or FAX your detailed information for prompt, satisfactory, and
consistent service.
Detailed Company Information
Company/Organization
Contact Person
E-mail Address
Address
Country
TEL FAX
Web Site
Questions
Product Model
Environment
OS:
Computer Brand:
M/B: CPU:
Chipset: BIOS:
Video Card:
NIC:
Other:
Detail Description
Suggestions for ADLINK

Table of Contents •i
Table of Contents
Outline of Chapters.....................................................................................ii
Chapter 1 Introduction ...............................................................................3
1.1 Features.............................................................................................4
1.2 Applications........................................................................................4
1.3 Specifications.....................................................................................4
Chapter 2 Installation .................................................................................7
2.1 Contents of Package..........................................................................7
2.2 Unpacking..........................................................................................7
2.3 Getting Started...................................................................................8
2.4 Software Installation...........................................................................8
2.5 Hardware Installation .........................................................................9
2.5.1 Jumper Setting (only for PXI-8570) .........................................9
2.5.2 Installing PCI-8570................................................................10
2.5.3 Installing PXI-8570 ................................................................10
2.5.4 Configuration & Cabling.........................................................11
Chapter 3 Hardware Overview.................................................................15
3.1 Basic Architecture of PCI Extension Module.........................................15
3.2 Bus Architecture....................................................................................16
Warranty Policy.........................................................................................18

ii •Chapter Outline
Chapter Outline
This manual is designed to help the user to understand and configure the
PCI/PXI-8570. It is divided into three chapters:
Chapter 1 Introduction
Gives an overview of the product features, applications, and
specifications.
Chapter 2 Installation
Describes how to install the PCI/PXI-8570, its jumper settings,
and cabling for PCI/PXI-8570 extension module.
Chapter 3 Hardware Overview
Describes the basic architecture of the PCI/PXI extension
module and its bus architecture.

Introduction •3
1
Introduction
The ADLINK PCI/PXI-8570 is a PCI to PXI or PXI to PXI extension module that
functions as a transparent PCI-PCI bridge register set. With coupling master and
slave extension modules, users will have direct control of PXI/CompactPCI
chassis from another PC or multi-chassis PXI/CompactPCI systems. All devices
on this system appear as local devices in a single PCI system. One master
extension card (PCI-8570 or PXI-8570) can expand up to 2 slave extension
modules (PXI-8570) at the same time.
ADLINK PCI/PXI-8570 employs the StarFabric architecture, a well-known
physical layer technology, with a serial interconnection at 622Mbps low voltage
differential signaling (LVDS). Four transmit and receive differential pairs are
used to provide 2.5Gbps full duplex link bandwidth. Using shielding twisted pair
copper cable can extend the transmission distance to 10m. The PCI interface
supports 64-bit or 32-bit PCI buses operating at 66MHz or 33MHz. A bundled
link can support the full bandwidth of 64-bit/66MHz PCI bus.
All interrupts asserted by add-in cards in the extension system are passed
through the extension set to the host system. PCI/PXI-8570 is built in a
transparent architecture, and function independently of the operating system. A
PCI-to-PCI bridge function in the system extension set provides 100% capability
with PCI drivers, application software, BIOS, O/Ss, configuration codes, etc.
With the PCI/PXI-8570, users can combine PCI, CompactPCI, and PXI devices
in the same system, increase the available number of PXI/CompactPCI slots for
high density I/O applications, and could separate the control system from the
harsh environment with the extension chassis.

4 •Introduction
1.1 Features
The PCI/PXI-8570, PCI to PCI and PXI to PXI Extension Card, provides the
following advanced features:
•Direct PC control of PXI/CompactPCI systems
•Multi-chassis configurations for PXI/CompactPCI
•Up to 2 PCI segments from signal 8570
•PCI local bus specifications Rev. 2.2 compliant
•PCI to PCI bridge architecture specifications Rev. 1.1 compliant
•PXI specifications Rev. 2.0 compliant
•Up to 64-bit, 66MHz PCI bus extension
•StarFabric link performance
o528Mbytes/s peak (64-bit, 66MHz PCI)
o132Mbytes/s peak (32-bit, 33MHz PCI)
•Shielded copper cabling
•10m maximum distance
•Completely hardware and software transparent
•Independent of operating systems
•Seamless PCI interrupt extension
1.2 Applications
•High Density I/O System
•Test System in Harsh Environment
•Electronic Manufacturing Test System
•Automation System with Existed PC
1.3 Specifications
Architecture
•Functions as a PCI-to-PCI bridge
•PCI-to-PCI bridge architecture specifications Rev. 1.1 compliant
•PCI local bus specifications Rev. 2.2

Introduction •5
•PXI specifications Rev. 2.0 compliant
•64-bit, 66MHz PCI bus extension
•Maximum data throughput
o132Mbytes/s (32-bit, 33MHz PCI)
o528Mbytes/s (64-bit, 66MHz PCI)
Certificates
•EMC/EMI: CE, FCC Class A
General Specifications
•I/O Connector: RJ-45 connector x 4
•Maximum cable length: 10m
•Operating temperature: 0 to 55ºC
•Storage temperature: -20 to 80ºC
•Relative humidity: 10 to 90%, non-condensing
•Power requirements
Device +5V +3.3V
PCI-8570 190mA 250mA
PXI-8570 - 540mA
•Dimensions (not including connectors)
Device Dimension
PCI-8570 175mm x 107mm
PXI-8570 160mm x 100mm

Installation •7
2
Installation
This chapter outlines the contents of package, describes unpacking information,
and describes how to install the PCI/PXI-8570 software and hardware.
2.1 Contents of Package
The package includes the following items:
•PCI-8570 or PXI-8570
•ADLINK All-in-one Compact Disc (PXI-8570 only)
•This User’s Manual
If any of these items are missing or damaged, contact your ADLINK dealer. Save
the shipping materials and carton in to ship or store the product in the future.
2.2 Unpacking
PCI/PXI-8570 contains electro-static sensitive components that can be easily be
damaged by static electricity.
Therefore, the module should be handled on a grounded anti-static mat. The
operator should be wearing an anti-static wristband, grounded at the same point
as the anti-static mat.
Inspect the module for obvious damage. Shipping and handling may cause
damage to the module. Be sure there is no shipping and handling damage on the
module before continuing.
You are now ready to install your PCI/PXI-8570.

8 •Installation
Note: DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
2.3 Getting Started
To set up and use the PCI bus extension module, you need the following:
•A PCI-8570 card and a PXI-8570 module or two PXI-8570 modules
•Two RJ-45 Copper cables (ADLINK provides three different lengths of
shielded copper cable to eliminate the EMI issues: ACL-PXIES-2,
ACL-PXIES-5, and ACL-PXIES-10. Please contact your local sales or
dealer for more information)
•Primary bus – A computer with a PCI backplane, or a PXI controller
embedded in a PXI/CompactPCI chassis
•Secondary bus – A PXI/CompactPCI chassis
2.4 Software Installation
Once Windows 98/2000/XP has started, the Plug and Play function of the
Windows system will find the new PCI/PXI-8570. If this is the first time installing
the PCI/PXI-8570 in your Windows system, you will be informed to input the
device information source. Please follow these steps to install PCI/PXI-8570.
For Windows 98 users:
1. Insert the ADLINK ALL-In-One CD. Under X:\PXI_Platform\PXI
Extension\Win98\, you can find starfab 1.inf (Xis the drive
letter of your CDROM). Copy this file to system information folder
(C:\Windows\inf)
2. When you complete the hardware installation, turn on your system.
3. You will be informed to input the device information source, please
point the source directory at C:\Windows\inf. The Hardware Install
Wizard will find MACHINE2.inf and install this device automatically.
For Windows 2000/XP users:
1. Insert the ADLINK ALL-In-One CD.
2. Execute 8570install.exe to start the setup. The path is:
X:\PXI_Platform\PXI Extension\NT\8570install.exe. (X

Installation •9
is the drive letter of your CDROM)
3. This setup program will copy the necessary files to your hard drive
automatically. When the hardware installation process is complete,
reboot the computer for the changes to take effect.
2.5 Hardware Installation
2.5.1 Jumper Setting (only for PXI-8570)
Spread Spectrum Jumper Setting
When PXI-8570 plugged into the system slot, it provides a discrete clock signal to
each of the peripheral slot defined as a PCI clock (CLK0, CLK1, CLK2, CLK3,
CLK4, CLK5, and CLK6).
An important feature of the PCI/PXI-8570 extension modules is that they support
33MHz/66MHz clock operating environment. As system clock increase,
electromagnetic interference (EMI) becomes a challenge for the system
designers. PXI-8570 adopts a spread-spectrum clock generator to help user to
deal with this difficult task.
Spread spectrum clocking speeds up and slows down the clock within a few
percent of its fundamental frequency. By reducing the peak amplitudes, the
system will more likely meet EMI emission compliance standards. In other words,
spread spectrum clocking distributes the energy that was originally concentrated
on one frequency over a wider band. This method dramatically reduces the
amount of EMI.
You can follow Figure 2.1 to turn on the spread spectrum clock generator.
Spread Spectrum Control JP1
OFF (default)
1 2 3
ON
1 2 3
Figure 2.1 Spread Spectrum Jumper Settings
M66EN Jumper Setting
PXI-8570 supports 64-bit or 32-bit PCI buses operating at 66MHz or 33MHz. A
bundled link can support the full bandwidth of 64-bit/66MHz PCI bus. You can

10 •Installation
utilize the following configuration to set the operation frequency of your system.
JP2 Setting
1 2 3
(default)
66 MHz PCI enable. If the backplane or any devices in the
system do not support 66MHz PCI bus operations,
PCI/PXI-8570 will detect the configuration and operate at 33
MHz automatically.
1 2 3
66MHz PCI disable. PCI bus is forced to operate at 33 MHz.
Figure 2.2 M66EN Jumper Settings
PCI/PXI-8570 supports the following primary and secondary bus frequency
combinations:
•66MHz primary bus, 66MHz secondary bus
•66MHz primary bus, 33MHz secondary bus
•33MHz primary bus, 33MHz secondary bus
PCI/PXI-8570 doesn’t support 33MHz primary/66MHz secondary bus operation.
2.5.2 Installing PCI-8570
Follow these steps to install PCI-8570.
1. Turn off your computer, leave it plugged in while installing PCI-8570. The
power code grounds the chassis and protects it from electrical damage while
you install this module.
2. Remove the top cover and the access port to the PCI bus.
3. Select any available PCI slot and remove the bracket-retaining screw.
4. Plug in the PCI-8570 and reinstall the bracket-retaining screw.
5. Replace the computer cover.
2.5.3 Installing PXI-8570
Follow these steps to install PXI-8570 in your PXI or CompactPCI chassis.
1. Turn off your PXI/CompactPCI system, leave it plugged in while installing
PXI-8570. The power code grounds the chassis and protects it from
electrical damage while you install this module.
2. Select a slot for PXI-8570:
a. For use in secondary PXI bus – Must choose the system slot (slot 1) of

Installation •11
your chassis.
b. For use in primary PXI bus – Choose any unused PXI or CompactPCI
peripheral slot except slot 1 (Slot 1 is reserved for the system
controller.)
3. Remove any covers blocking access to the slot in which you intend to install
PXI-8570.
4. Make sure the injector/ejector handle is in its downward position.
5. Hold the handle as you slide the module into the chassis until the handle
catches on the injector/ejector rail.
6. Raise the injector/ejector handle until the module firmly seats into the
backplane receptacle connectors. The front panel of PXI-8570 should be
even with the front panel of chassis.
7. Tighten the bracket-retaining screws.
2.5.4 Configuration & Cabling
Because PCI/PXI-8570 extension module functions as standard PCI-to-PCI
bridge, it can take advantage of a variety of extension configurations. Figure 2.3
& 2.4 show the most basic PCI extension configuration. Each primary extension
module can connect to two secondary extension modules at most in order to
extend two PCI segments. Figure 2.5 & 2.6 show the Star and Daisy-chain
configurations to extend more than two PXI chassis.
Each PCI/PXI-8570 extension module has two link ports (Link 0 and Link 1), and
each link is divided into transmit (Tx) and receive (Rx). Please follow these steps
to link the primary and secondary extension modules:
1. Connect the cooper cables to both primary and secondary extension
modules. Two cables are needed while linking the primary and secondary
modules. One cable is used for connecting transmit (Tx – black if ADLINK
cables are used) of primary module with receive (Rx) of secondary module.
The other is used for connecting receive (Rx – red if ADLINK cables are
used) of primary module with transmit (Tx) of secondary module. Please
refer to Figure 2.3 and 2.4 for the connection. Turn on the system with the
secondary extension module first.
2. And then turn on the system with the primary extension module.
Notes:
•If your operation is correct, the indicated LED of primary extension
module is dark and the LED of secondary extension module is bright.

12 •Installation
•If you turn on the system with primary extension module first and
then secondary extension module, the indicated LED of both
modules will keep twinkling.
•If the communication between primary and secondary extension
modules is broken, the indicated LED of primary moudle is bright and
the LED of secondary module is dark.
•If Star or Daisy-chain configurations are implemented, please always
turn on the secondary system first.
Figure 2.3 Basic PCI extension configuration – extend one PCI segment

Installation •13
Figure 2.4 Basic PCI extension configuration – extend two PCI segments
Figure 2.5 Star configuration

14 •Installation
Figure 2.6 Daisy-Chain configuration

Hardware •15
3
Hardware Overview
This chapter describes the basic architecture of the PCI extension module and its
bus architecture.
3.1 Basic Architecture of PCI Extension Module
The PCI/PXI-8570 extension module is basically a PCI-to-PCI bridge. The
PCI-to-PCI bridge function in the PCI/PXI-8570 supports legacy address routed
traffic, which provides 100% capability with PCI drivers, application software,
BIOS, O/Ss, etc. These functions allow users to transfer their designs without
extra effort. The functional block diagram of PCI/PXI-8570 is shown in Figure 3.1.
The PCI/PXI-8570 employs a serial interconnect technology, 622Mbps low
voltage differential signaling (LVDS). Each PCI/PXI-8570 extension module has
two link ports, named as Link 0 & Link 1. Each link is divided into transmit (TX)
and receive (RX). Four TX and RX differential pairs in each link are used to
provide 2.5Gbps full duplex link bandwidth or 5Gbps of total bandwidth.
Incorporated with the high speed serial LVDS, it is easy to extend the
transmission up to 10 meters through shielded twisted pair copper cables.
Inside the PCI-to-PCI bridge, a PCI-to-StarFabric/StarFabric-to-PCI converter is
used to translate PCI transactions into StarFabric frames and StarFabric frames
into PCI transactions. The PCI interface of the PCI/PXI-8570 is capable of
64-bit/66MHz. Thus the maximum data throughput can up to 528Mbytes/s. The
PCI interface in PCI/PXI-8570 acts like the primary side of a PCI-to-PCI bridge if
PCI/PXI-8570 is plugged into the peripheral slot. The PCI interface in PXI-8570
acts like the secondary side of a PCI-to-PCI bridge if PXI-8570 is plugged into the
system slot. The secondary side PCI interface of PCI-to-PCI bridge is
responsible to the central resources and system clocks generation.