ADSS CoilPro ECI User manual

CoilPro
ECI
OPERATION MANUAL
Electric Coil Inserter
Advanced Document Systems & Supply, Inc.
PHONE: [phone] • FAX: [phone]
www.adss.net
AD
SS
S

on/off Switch
Coil Inserting
Roller
Pitch
Identifier
Foot Pedal
Control
Diameter
Scale
Alignment
Channel
Diameter
Selector
Pre-insertion
Coil Inserting(binding)
Warranty Policy
optional steps:
1. Use pitch identifier function to verify that the coil pitch
matches that of the punched document. (see picture 1)
2. Place to-be-bound document into Coil Diameter Selector to
best select the correct coil diameter size.
3. Align coil diameter to Diameter Scale, to verify that the coil
size is what you require. (see picture 2)
Introduction
Important
Features
Assembly
Safety Instructions
1. Place your new CoilPro ECI
on top of a sturdy working table.
(see picture 1)
2. Turn on switch and press
foot pedal to test inserting roller.
(see picture 2)
1. Keep fingers, hair, jewelry, neckties and any loose clothing or objects away from roller,
as they may be accidentally pulled into the roller.
2. Do not allow children to operate the machine. The CoilPro ECI is not a toy.
3. Always turn switch-off and place foot pedal out of reach when machine is not in use.
4. To reduce the risk of electric shock, never operate the CoilPro ECI near water.
5. Do not use the CoilPro ECI if power cord is damaged.
6. Do not allow the electric cord to be in contact with hot surfaces.
7. In case of malfunction, return the unit to your distributor for service.
Congratulations on the purchase of your new CoilPro ECI. A professional and efficient coil
binding machine. Your CoilPro ECI was carefully designed with a full range of functions and
premium quality components to guarantee an effortless and professional bind, as well as many
years of trouble-free service.
We recommend that you take a few minutes to familiarize yourself with the functions of your
new CoilPro ECI. You will find that with just a little practice, anyone can achieve professional
results
1. Align punched document on Alignment Channel. This feature is especially helpful for
larger documents. (see picture 1)
2. Place document on top of machine or table and insert the coil into the first four to five
holes. (see picture 2)
3. Hold document evenly against the roller (coil must slightly touch the roller).
4. Press the foot Pedal. The coil will automatically move forward inserting itself into the
holes. (see picture 3)
5. After the last hole insertion, IMMEDIATELY move document away from roller and/or
stop pressing the foot pedal. Remark: if coil is over inserted or some pages are not inserted,
simply flip document over and proceed with insertion as per step 3.
6. Use crimpers to cut & crimp the excess coil. Make sure you crimp-in both ends. This
procedure will prevent the document from unbinding itself. (see picture 4)
Your CoilPro ECI has a warranty of one year from the date of purchase. In the event of a
manufacuturer's defect, your distributor (at option) will repair or replace it. IMPORTANT:
This warranty does not cover damages due to improper use or miss treatment of the unit,
includingany extraordinary event leading to the damage of the machine, whether it is
reversible or not.
If the CoilPro ECI is not working properly, first follow the corrective actions above. If the
problem persists, please contact your dealer for further instructions. Please have your
machine's serial number and the purchase date ready. If the machine must be returned to
your distributor, it is your responsibility to properly pack and ship it. As any damages
incurred during its transportation is not covered by our warranty policy.