hushoffice hushtwin HUS-BX-019 User guide

Manufacturer: Fabryka Mebli Biurowych Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska
Distributor: Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska hushoffice.com
MAINTENANCE AND SAFETY RULES
hushtwin * HUS-BX-019/119
1GLASS ELEMENTS
Once a week, clean the surface in circular
motions using a damp cloth.
If you use a cleaner, apply it first to the cloth
and clean the surface.
To clean glazed elements, use chemical
products that are intended to clean glass and
mirrors.
2TABLE TOPS
Regularly clean the entire surface with a mi-
crofibre cloth soaked in the cleaner or water.
Allow to dry.
Do not apply the cleaner directly to the surface.
Do not use abrasive products, polishing
products and scouring pads or sponges.
3HANDLES
Clean the handle inside and outside the booth
every day using a damp microfibre cloth. After
cleaning, wipe the handles dry.
4VENTILATION SYSTEM
Once every six months, vacuum the fan using
a soft attachment of the vacuum cleaner.
Do not insert the hose between the fan blades.
5CASE AND FLAT SURFACES
Once a week, clean the surface from top
to bottom with a damp microfibre cloth. Mi-
crofibre cloths do not leave fibres and prevent
streaks. If any liquid is spilled on the furniture,
wipe it immediately before it dries. Do not use
products containing abrasive agents, such as
powders, pastes and cream cleaners which can
scratch the surface. Do not use scouring pads
or sponges.
1
3
5 4
26
7
8
6UPHOLSTERED ELEMENTS
Once every six months, vacuum the surface
of all upholstered elements (panels and seats)
from top to bottom.
For heavy soiling, use a neutral cleaner.
Before cleaning, test the cleaner on a
hidden area and follow manufacturer’s
instructions.
Use upholstery cleaners that do not
contain paraffin, alcohol or other solvents.
In the case of Wool fabric, lint and pilling occurs
over time. This is a natural process for this type
of fabric.
7FLOOR
Once a week, vacuum the entire floor surface.
For heavy soiling, use a neutral cleaner. Use
products intended for floor coverings.
Before using the cleaner, test it on a hidden
area.
8PLASTIC PARTS
Once a week, clean the surface from top to
bottom with a damp microfibre cloth. Using
solvent-based products may damage the sur-
face. Do not use products containing abrasive
agents, such as powders, pastes and cream
cleaners which can scratch the surface. Do not
use scouring pads or sponges.
* Product visualisation is for reference only. Variations are allowed depending on the version of the product available in a given market.

Manufacturer: Fabryka Mebli Biurowych Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska
Distributor: Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska hushoffice.com
This appliance can be used by children aged from 8 years of age and persons with reduced physical or mental capabilities. Children must
not play with the appliance or clean it or carry out maintenance. The booth can be used by persons with no experience and knowledge
of the appliance if they have been given supervision or instruction concerning the safe use of the appliance so they understand the potential
hazards related to such use.
VENTILATION SYSTEM
AND LIGHTING SETTINGS
Do not disconnect the booth from the power
supply after use to ensure adequate air exchan-
ge. When you leave the booth, the ventilation
system will continue to operate for the time set
on the motion sensors.
When you enter the booth, the fans and lighting
in the ceiling start operating at 50% speed and
intensity. Use the knobs to adjust the ventilation
and lighting output.
To increase the light intensity and the level
of ventilation efficiency, use the knob by turning
it to the right.
To reduce the lighting level and ventilation
efficiency, use the knob by turning it to the left.
UPHOLSTERY
Avoid applying strong spot pressure forces.
This may cause tears or splits.
BOOTH INSTALLATION AND DISASSEMBLY
See installation instructions for information about
how to correctly install the booth and about the
number of components. The booth should be
installed and disassembled by a trained instal-
lation crew using tools intended for this purpose
as specified in the installation instructions.
MOTION SENSOR
The motion sensor allows the lighting and
ventilation system to be switched on quickly
and automatically when motion is detected.
Do not press or cover the sensor located in the
booth ceiling. When motion is detected again,
the sensor will automatically start the operating
cycle.
NUMBER OF USERS
Do not exceed the recommended maximum
number of users as specified below.
Maximum number of users:
HushTwin – x 2
MOVING THE BOOTH
It is required to disconnect the booth from the
power source before moving it.
It should be done using pallet trucks.
It is recommended to move the booth over
the hard surfaces or carpet.
Faults and unevenness in the surface may
cause damage to the internal and external
costruction. Moving the booth without it lifting
may cause damage.
INTENDED USE OF THE BOOTHS
Hushoffice booths should be used for purpo-
ses for which they are intended and for which
they have been designed. Our products have
to be used indoors in dry places.
In particular, the following should be avoided:
prolonged exposure to temperatures
below 15°C and above 40°C;
temporary temperatures above 60°C;
exposure to water
and air humidity above 70%;
direct exposure to sunlight.
USE
Avoid pushing the walls from the inside
of the booth. This may cause damage to
the internal and external structure.
Avoid leaning against the booth on the
outside and applying forces acting on
the door from the top.
Do not allow shoes to come into contact
with the upholstery.
Do not smoke in the booth.
Items with sharp edges or rough surfaces
can scratch the tabletop. Thus, use pads
(especially for wood veneer and varni-
shed furniture).
Electrical and heat-emitting appliances
should only be used when users are
present in the booth.
The electrical system should be used as
specified in the provided instructions.
Close the door after leaving the booth.
If you have any doubts as to how to use
and maintain the furniture, please contact
the manufacturer before proceeding with
any of the operations described in the
instructions.
FLOORS
The floor surface should be level to ensure
the best acoustic properties of the product and
to make it easier to adjust the door.
MAINTENANCE AND SAFETY RULES
hushtwin HUS-BX-019/119

Manufacturer: Fabryka Mebli Biurowych Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska
Distributor: Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska hushoffice.com
INFORMATION ABOUT THE WASTE
ELECTRICAL AND ELECTRONIC
EQUIPMENT COLLECTION SYSTEM
Return your waste electrical
and electronic equipment
to the place of purchase.
Take your waste equipment to a collection
facility. Information about the nearest location
can be found on the website or notice boards
of local authorities. Collected equipment is de-
livered to specialised waste treatment facilities
where hazardous components are removed
first. Other components are recovered and
recycled. Each appliance powered by elec-
tricity or batteries should be labelled with the
crossed-out wheeled bin symbol.
The crossed-out wheeled bin symbol on the
equipment, packaging or documents accom-
panying the equipment means that the product
must not be disposed of with other household
waste. It is the user’s responsibility to take the
waste equipment to a designated collection
facility for proper treatment. This symbol also
means that the equipment was placed on the
market after 13 August 2005.
Do not dispose of your waste equip-
ment with other household waste!
If you do, you may get a fine.
Proper handling of waste equipment prevents
potential negative consequences for the environ-
ment and human health.
At the same time, we save natural resources by
reusing raw materials obtained from recycling.
PERMISSIBLE LOADS
Do not exceed the recommended maximum
loads in the booths as specified below. The
loads depend on the booth configuration.
Do not sit on the table!
Maximum load of tabletop – 15 kg / 33 lbs.
Maximum load of the one-person bench
– 150 kg / 330 lbs.
MAINTENANCE AND SAFETY RULES
hushtwin HUS-BX-019/119
POWER SUPPLY
Hush can be connected to a power supply which meets the power quality standards defined in the legislation in force. The manufacturer
of Hush recommends that the socket supplying power to the booth is protected by a residual current circuit breaker (30 mA) and a type
B miniature circuit breaker (max. 16 A). Once the Hush booth is installed, connect it to a 110 V or 230 V single-phase AC source using
the provided single-phase plug and check the lighting and socket operation. Do not exceed the maximum single-phase socket load
power of 800 W. During the warranty period, it is forbidden to tamper with the electrical system. Any repairs or modifications to the
electrical system should be made by a qualified person.
If a non-detachable power cable is damaged, it should be replaced by the manufacturer, a service technician or a qualified person
in order to avoid any risk.
Power consumption on stand-by mode 0,3 W.