adstec MMT8000 Series User manual

Updated 2018-06-27
Instruction manual
Machine Mounted Terminals /
Machine Mounted Displays
MMT8000 series / MMD8000 series
Version 2.1
Translation of the original
instruction manual

MMT8000 series / MMD8000 series 2
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
Read these instructions carefully before using and store for future reference.
These instructions contain important information about the product, in particular about its
intended use, safety, installation, utilisation, maintenance and disposal.
Hand over the instructions to the user following installation of the product, and pass the
manual on to the new user if the product is resold.
These instructions can be downloaded from: www.ads-tec.de in the Download area.
Publisher
ads-tec GmbH
Heinrich-Hertz-Straße 1
72622 Nürtingen
Phone: [phone]
Fax: [phone]
Internet: www.ads-tec.de
E-mail: [e-mail]

MMT8000 series / MMD8000 series 3
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
Table of Contents
1Device description...........................................................................................................6
2General safety instructions ............................................................................................9
2.1 Information about documentation 9
2.1.1 General remark 9
2.1.2 Limitation of liability 9
2.1.3 Manufacturer and contact details 10
2.1.4 Relevant device documentation 10
2.1.5 Symbols 10
2.1.6 Data, figures and modifications 11
2.1.7 Trademarks 11
2.1.8 Copyright 11
2.1.9 Standards 11
2.2 Explanation of safety instructions 12
2.2.1 Structure of safety instructions 12
2.2.2 Explanation of signal words 13
2.3 Safety instructions 14
2.3.1 Basic safety instructions 14
2.3.2 Environmental conditions 14
2.3.3 Intended use 16
2.3.4 Improper use 16
2.3.5 Damage due to improper use 16
2.3.6 Warranty / repairs 17
2.3.7 Treatment and disposal of lithium batteries 17
2.3.8 Electrostatically sensitive components 18
3Scope of delivery...........................................................................................................19
3.1 Optional scope of delivery 20
4Installation .....................................................................................................................21
4.1 Inclination angles 22
4.2 Overview of installation components 23
4.3 Order of installation 27
4.4 Installation with support arm adapter 28
4.4.1 Detaching support arm adapter from device 28
4.4.2 Key module 29
4.4.3 Adjusting position of support arm adapter 32

MMT8000 series / MMD8000 series 4
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
4.4.4 Preinstallation of connecting tube 34
4.4.5 Cable routing 36
4.4.6 Mounting support arm adapter on connecting tube 37
4.4.7 Detaching and attaching service slot cover 38
4.4.8Mounting device on support arm adapter 40
4.5 Installation with crosspiece adapter 41
4.6 Installation with VESA 75 adapter 42
5Interfaces .......................................................................................................................44
5.1 Interfaces of machine mounted terminal 45
5.2 Interfaces of machine mounted display 48
5.2.1 Maximum cable lengths 50
5.3 Functional earthing 51
5.3.1 General informations regarding functional earthing 51
5.3.2 Functional earthing MMT 51
5.3.3 Functional earthing MMD without HDBaseTTM Extender Kit 52
5.3.4 Functional earthing MMD with HDBaseTTM Extender Kit 52
5.3.5 Functional earthing of accessories 53
6HDBaseT™ Extender Kit...............................................................................................54
6.1 Installation of receiver module 54
6.2 Interfaces of receiver module 55
6.3 Connecting cables between receiver module and MMD 56
6.4 Interfaces of transmitter module 57
6.5 Status indicators 58
6.5.1 Status indicators on transmitter module 58
6.5.2 Status indicators on receiver module 59
7Commissioning .............................................................................................................60
8Operation .......................................................................................................................62
8.1 Switching on and off 62
8.2 Multifunction touch-screen 62
8.3 Turning/tilting device and key module 63
8.4 Component replacement 65
8.4.1 Replacing BIOS battery on MMT8000 series 65
8.4.2 Replacing mass storage device 67
8.4.3 Replacement parts list 69

MMT8000 series / MMD8000 series 5
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
9Maintenance, cleaning and disposal............................................................................70
9.1 Maintenance 70
9.2 Cleaning 70
9.3 Disposal 71
10 Nomenclature of ADS-TEC products and accessories...............................................72
10.1 Main articles 72
10.2 Accessory articles 73
10.2.1 Display and USB transmission 73
10.2.2 Support arm adapter 74
10.2.3 Product kits 74
11 Technical data ...............................................................................................................75
11.1 MMT-MMD technical data 75
11.1.1 Data sheet 75
11.1.2 External device dimensions MMT8017 76
11.1.3 External device dimensions MMT8024 77
11.1.4 External device dimensions MMD8017 78
11.1.5 External device dimensions MMD8024 79
11.2 HDBaseT™ Extender Kit technical data 80
11.2.1 Data sheet 80
11.2.2 External device dimensions – HDBaseT™ Extender Kit transmitter 81
11.2.3 External device dimensions – HDBaseT™ Extender Kit receiver 82
12 List of figures.................................................................................................................83
13 Service & support..........................................................................................................86
13.1 ADS-TEC support 86

MMT8000 series / MMD8000 series 6
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
1 Device description
The Machine Mounted Terminal (MMT) and Machine Mounted Display (MMD) are designed for the
control and visualisation of production processes in the pharmaceutical, foodstuff, beverage and
chemical industry. In the case of the MMT, the processing unit is integrated in the housing, making an
external PC unnecessary for control (Figure 1: Use of MMT and MMD). The MMD is a display which
can be controlled by an external computer, e.g. from the existing industrial computer environment.
With the MMD, cables can be used for distances of up to 15 m between the display and computer.
The optional HDBaseT™ Extender Kit has been developed to bridge greater distances of up to 100 m.
MMT and MMD are both available in the 17 and 24 inch format.
Figure
1: Use of MMT and MMD

MMT8000 series / MMD8000 series 7
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
The MMT/MMD8000 series has been specially developed to fulfil strict hygiene requirements. This is
achieved by the stainless steel housing of the device being completely closed, having rounded edges
and no external screws. This allows the device to be cleaned simply and effectively. The device has
no fan, which means that the primary source of contamination is not present. Due to its robust,
compact design, the device can also be operated under demanding environmental conditions. All
necessary cables are routed to the device through the connecting tube so that there are no exposed
cables in the operating room.
Thanks to the very latest multi-touch technology, the full-HD display with a maximum resolution of
1920x1080 pixels can be operated conveniently by touching and also by means of swiping and
dragging movements. Operation with special gloves is also possible. Additionally, a freely configurable
key module is available which enables e.g. individual production processes to be started and stopped
by simply pressing keys or by operating a switch. An emergency-stop switch can also be integrated in
this module.
Both the MMT and MMD can be mounted either on a stand or on a support arm, i.e. stand or
suspended mounting (Figure 2).
In addition to the T-piece support arm adapter, a crosspiece support arm adapter is also available
(Figure 3). This allows two monitors to be mounted one above the other.
Figure
2: Mounting on support arm and stand
Figure
3: Crosspiece adapter

MMT8000 series / MMD8000 series 8
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
By simply turning and tilting the device and the key module, each device can be adjusted during
operation so that the user can view it at the optimum angle (Figure 4).
Alternatively, ADS-TEC also offers a VESA adapter which can be used to connect the device to a
VESA 75 mounting system (Figure 5).
Figure
4: Turning and tilting
Figure
5: VESA adapter

MMT8000 series / MMD8000 series 9
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2 General safety instructions
2.1 Information about documentation
2.1.1 General remark
This instruction manual is intended to ensure safe and efficient handling and operation of IT
Infrastructure products.
The instruction manuals must be read carefully by personnel before commencing any type of work.
All of the safety instructions and handling instructions given in the manual must be obeyed in order to
ensure that work is carried out safely.
Operation of the system is subject to the laws and regulations which are applicable in the respective
country at national, federal, European and international level.
The generally accepted rules of technology, usually in the form of standards, directives, regulations,
conditions and technical rules specified by national and federal organisations as well as trade
associations and committees for the field of specialisation concerned, shall apply.
Figures used in this instruction manual are provided for basic understanding and may differ from the
actual design.
The operator/operating company is independently responsible for compliance with and observance of
any subsequently introduced technical innovations or new legal requirements, as well as for all usual
obligations of the operator/operating company.
The original version of this instruction manual was written in German. All non-German versions of this
instruction manual are translations of the German instruction manual.
2.1.2 Limitation of liability
ADS-TEC GmbH shall not be liable for personal injury, property damage or damage caused to the
device as well as consequential damage that is/was the result of non-compliance with this instruction
manual, improper use of the device, repairs and other actions on the device by unqualified electricians
and electricians not certified by ADS-TEC GmbH, or that is/was the result of using unapproved
replacement parts. Failure to observe the maintenance intervals shall also result in exclusion from
liability. Furthermore, it is strictly forbidden to make any unauthorised alterations or technical
modifications to the device.

MMT8000 series / MMD8000 series 10
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2.1.3 Manufacturer and contact details
The manufacturer of the product is ads-tec GmbH. The company is referred to in the following as
ADS-TEC.
ads-tec GmbH
Heinrich-Hertz-Str.1
72622 Nürtingen
Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.ads-tec.de
2.1.4 Relevant device documentation
The following documents are decisive to device setup and operation:
•Instruction manual:
Contains information for installation, commissioning and operation of the device along with
technical data of the device hardware.
•Website:
You can download the instruction manual as well as drivers, software, user manuals, leaflets
and flyers from the Download area of our website www.ads-tec.de.
2.1.5 Symbols
Symbol Meaning
Designation of batteries in accordance with § 13 of the German Battery Act (BattG).
Batteries may not be disposed of with household waste, but must rather be disposed of
separately. Used batteries must be returned to the point of sale or a disposal system.
Labelling of electrical and electronic devices in accordance with § 7 of the German
Electrical and Electronic Equipment Act (ElektroG). Electrical and electronic devices must
not be disposed of with household waste, but must rather be taken to a collection point for
waste electrical equipment. Such a collection point is generally operated by public waste
management authorities, i.e., by municipalities.
Symbol for the functional earth connection

MMT8000 series / MMD8000 series 11
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2.1.6 Data, figures and modifications
All data, text and figures were prepared to the best of our knowledge. They do not represent any
assurance for the properties themselves. Despite taking utmost care, no liability can be assumed for
accuracy, completeness and actuality of the information. Subject to changes.
2.1.7 Trademarks
It is noted that any software and/or hardware trademarks and any company brand names mentioned
in this documentation are all subject to the general trademark protection rights.
StoraXe®, Big-LinX® and X-Remote are registered trademarks of ADS-TEC.
All other used third-party trademarks are hereby acknowledged.
In the case of trademark infringement, ADS-TEC reserves the right to exercise all rights.
2.1.8 Copyright
This instruction manual is protected by copyright. For the authorised user, simple usage rights are
granted within the scope of the intent of the contract. Any modified use or exploitation of the provided
content, particularly duplication, modification or publishing in whatever form is permitted only with the
prior consent of ADS-TEC.
In the case of copyright infringement, ADS-TEC reserves the right to exercise all rights.
2.1.9 Standards
The manufacturer hereby declares that the product described in this instruction manual complies with
all relevant stipulations of the following European directives:
•2011/65/EU, RoHs Directive
•2014/30/EU, EMC Directive
•2014/53/EU, RED Directive
•2014/35/EU, Low Voltage Directive

MMT8000 series / MMD8000 series 12
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
The product is a class B device.
Note: For full compliance with the EMC legislation, all components and cables used for device
connection must also be compliant with these requirements. It is therefore necessary to employ BUS
and LAN cables with shielded connectors and these must be installed as per the instructions
contained in the instruction manual.
A corresponding EU conformity declaration is available for competent authorities at the manufacturer
and can be viewed upon request.
The EU conformity declaration can be requested on our website www.ads-tec.de and downloaded in
the Download area.
The product also complies with the following UL standards:
UL 61010-1 Programmable Controllers
UL 61010-2-201 UL file number E343358
CAN/CSA-C22.2 No. 61010-1
CAN/CSA-C22.2 No. 61010-2-201
2.2 Explanation of safety instructions
2.2.1 Structure of safety instructions
The signal word classifies the hazard.
Reference to the type/consequences and source of the hazard is made underneath the signal word.
Information on how to avoid the hazard is indicated by an arrow ().
DANGER
Type and source of the hazard!
Possible consequences if the hazard is disregarded
Measures for avoiding the hazard

MMT8000 series / MMD8000 series 13
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2.2.2 Explanation of signal words
DANGER
Indicates an imminent danger.
If not avoided, death or severe injury will result.
WARNING
Indicates a possible danger.
If not avoided, death or severe injury could result.
CAUTION
Indicates a possible danger.
If not avoided, light or minor injuries could result.
ATTENTION
Indicates a possibly damaging situation.
If not avoided, the system or something in its surroundings could be damaged.
Recommendation for use:
Indicates terms and/or conditions that strictly need to be observed to ensure
optimised and/or zero-defect operation. Tips and suggestions for the efficient use
of the device and software optimisation are also provided.

MMT8000 series / MMD8000 series 14
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2.3 Safety instructions
2.3.1 Basic safety instructions
•All users must read this manual and have access to it at all times.
•The safety notices and the manual itself must be observed by all persons who work with this
device.
•The manual contains the most important instructions on how to use this device in a safe way.
•Intervention by the user is required only for performing the actions described in this document.
Should any further modifications be required, it is necessary to consult either with the
manufacturer directly or with service personnel authorised by the manufacturer.
•The device must be de-energised during work. Appropriate measures must be taken to
prevent electrostatic discharges on components.
•If the device is opened up by an unauthorised person, the user may be subject to hazards and
the warranty is invalidated.
•Installation, commissioning and operation may only be performed by qualified and trained
personnel.
•At the installation site the valid guidelines and regulations for accident prevention must be
observed.
•Appropriate storage, proper transport, installation and commissioning, as well as careful
operation are prerequisites for ensuring safe and proper operation of the device.
•The device can be cleaned using cleaning agents specified in chapter 9.
2.3.2 Environmental conditions
ATTENTION
Damage caused by heat!
If the device is exposed to sunlight or any other light or heat source, it can overheat and suffer
damage.
Do not expose the device to direct radiation by sunlight or any other light or heat source!

MMT8000 series / MMD8000 series 15
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
Use of the device is only permitted
•in enclosed buildings
•in non-explosive atmospheres
•at altitudes below 2000 m
•in environments with maximum contamination grade 2 (IEC/EN 61131-2)
The device can be operated under the environmental conditions (temperature, humidity, vibration and
shock) which are specified in the data sheet in chapter 10.1.1. Failure to observe any one of these
conditions will invalidate the warranty of the device. ADS-TEC cannot be held liable for any damages
arising from improper use and handling.
The climatic conditions were tested according to:
IEC/EN 60068-2-1
IEC/EN 60068-2-2
IEC/EN 60068-2-14
Protection class: IP65 according to DIN EN 60529
ATTENTION
Damage caused by heat!
If the device is installed in a panel, casing or similar, heat accumulation can occur.
Make sure that heat can be dissipated from the device!
ATTENTION
Damage caused by condensation!
If the temperature of the device is different to that of the room in which it is located, condensation
can form.
Switch on the device only if it has acclimated to the ambient temperature!

MMT8000 series / MMD8000 series 16
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2.3.3 Intended use
The control system is designed for use in the pharmaceutical, food, beverage and chemical industries.
It was specially developed for the hygiene sector. The device is used for the visualisation and control
of a wide range of processes on systems and machines in various application environments.
The device is only to be assembled, installed and operated within the permissible specifications. Use
in non-specified environments is prohibited.
2.3.4 Improper use
Operation other than or beyond that described for the device shall be deemed improper use.
The device is not allowed to be used to control vehicles or for applications for which further approvals
beyond the manufacturer's declaration are necessary, e.g. applications with explosion hazard, medical
technology and shipping industry.
The device must not be put into operation in the case of transport damage or nonconformity with the
specifications and, if necessary, must be taken out of operation in the case of changing conditions.
In the case of improper use, ADS-TEC shall not accept responsibility or liability for injury or damage
that is directly or indirectly attributable to the handling of the device.
2.3.5 Damage due to improper use
Should the control system have evident signs of damages caused, e.g., by transport, nonconformity
with the specifications, improper operation and storage conditions or due to improper use or handling,
the device must be shut down immediately. Ensure that it is secured against being started up
accidentally.
ATTENTION
Risk of mechanical damage!
The device can be damaged as a result of unauthorised mechanical modifications.
Make sure that the device is not drilled, chiselled or perforated and its exterior shape and
design is not modified in any way!

MMT8000 series / MMD8000 series 17
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2.3.6 Warranty / repairs
During the device warranty period, any repairs must only be performed by the manufacturer or by
service personnel that has been authorised by the manufacturer.
2.3.7 Treatment and disposal of lithium batteries
This device contains a lithium battery for supplying the system clock with power as long as the supply
voltage is not connected. The battery has a life cycle of 3-5 years depending on which load is applied.
The battery type to be used is:
Lithium battery CR2032 230 mAh
ADS-TEC part number: DZ-SONS-04075-1
The used lithium battery should be disposed of in accordance with local legal regulations.
ATTENTION
Hazard due to thermal loads
The more the battery is exposed to higher temperatures, the faster it ages.
Operate the device within its specifications!
WARNING
Hazard due to explosion
Danger of explosion if using incorrect battery types.
Use the battery type recommended by the manufacturer!
ATTENTION
Damage to the battery
Incorrect handling of the battery can cause it to be damaged or destroyed
Lithium batteries should not be exposed to fire, soldered, recharged, opened, short-circuited,
reversed or heated above 100 °C and they should be disposed of properly as well as protected
against sunlight, humidity and condensation!

MMT8000 series / MMD8000 series 18
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2.3.8 Electrostatically sensitive components
ATTENTION
Damage due to electrostatically sensitive components
Damage to the device can be caused by electrostatic discharges.
All installation and service work performed on the device must be performed only under safe,
secure and de-energised conditions!
Recommendation for use:
Always adhere to the safety measures applicable when handling components at
risk of being damaged by electrostatic discharges.
The provisions of DIN EN 61340-5-1 / DIN EN 61340-5-2 apply.

MMT8000 series / MMD8000 series 19
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
3 Scope of delivery
Please check that all of the following components are contained in the packaging.
MMT8000 series
Device DVG-MMT8017
or
DVG-MMT8024
4-pin plug (power supply) DZ-SONS-01222-1/*
Instructions for drilling template DZ-HAND-91053-0/*
Drilling template (for support arm adapter) DZ-MECH-32444-0/*
Installation aid (M3 Allen key) DZ-MECH-33703-0/*
MMD8000 series
Device DVG-MMD8017
or
DVG-MMD8024
3-pole plug DZ-SONS-00994-2
Instructions for drilling template DZ-HAND-91053-0/*
Drilling template (for support arm adapter) DZ-MECH-32444-0/*
Installation aid (M3 Allen key) DZ-MECH-33703-0/*
ATTENTION
Damage to components containing soft parts!
If the soft material is subjected to a concentrated load, e.g., by placing it on a grating, irreversible
impressions will form after some time.
Make sure that a suitable surface is provided when setting down the device on its display side,
e.g. a clean, plane surface!

MMT8000 series / MMD8000 series 20
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
3.1 Optional scope of delivery
Operating system (only with MMT8000 series)
Key module
Key module DO-001520
Additional elements for key module (for non-premounted key module)
Front coversheet for key module
DZ-MECH-32391-0/*
Insert strip (silver)
DZ-MECH-32396-0/*
Insert strip (black)
DZ-MECH-32396-1/*
HDBaseT™ Extender Kit (only with MMD8000 series)
Transmitter module
DV-MMDEXT-TX
Receiver module
DV-MMDEXT-RX
USB cable
DZ-SONS-05647-0/*
HDMI cable
DZ-SONS-05646-0/*
Cable for power supply
DZ-SONS-09796-0/*