HIK VISION DS-K1T502 Series Operating instructions

How to use DS-K1T502 with Mobile Phone

Title:
How to use DS-K1T502 with Mobile Phone
Version:
v1.0
Date:
14/02/2023
Product:
Access Control Terminal
Page:
1 of 3
1
Preparation
Type
Model
Version
Access Control Terminal
DS-K1T502
V1.7.2 build 221219 or later
How to use DS-K1T502 with Mobile Phone
Introduction
When the device is not activated, we can use the device AP hotspot connection to activate the
DS-K1T502 device and connect to the device WEB for configuration operation.
1. Connection
The Wi-Fi initial password is the device serial number, for example: K49645302.

Title:
How to use DS-K1T502 with Mobile Phone
Version:
v1.0
Date:
14/02/2023
Product:
Access Control Terminal
Page:
2
2 of 3
2. Activate the device
Activating the device requires setting a password, and subsequent connections need to use this
password to connect to the hotspot.
3. WEB configuration
You can click on Settings in the upper left corner to enter the configuration page.

Title:
How to use DS-K1T502 with Mobile Phone
Version:
v1.0
Date:
14/02/2023
Product:
Access Control Terminal
Page:
3
3 of 3
Note:
1. After 30 min after device powering on, the hotspot function will be disabled automatically.
Hold key 5 on the device keypad for 10 s to enable/disable the hotspot function.
2. The default factory is to enable the AP, if not enabled, you can enable it through the browser WEB
side. After device activation, the hotspot password will be changed to the device activation
password.